Maxtrack CS 1-5 L

Maxtrack 5-Way HDMI Switch CS 1-5 L User Manual

Model: CS 1-5 L

1. Įvadas

The Maxtrack 5-Way HDMI Switch (Model CS 1-5 L) is designed to connect up to five HDMI source devices to a single HDMI display. This device allows for easy switching between multiple HDMI sources such as game consoles, Blu-ray players, and streaming boxes, eliminating the need to constantly reconnect cables. It supports 4K resolution at 30Hz, Full HD, 3D, and HDCP, ensuring high-quality video and audio transmission.

2. Pakuotės turinys

Patikrinkite pakuotę, ar joje yra šie daiktai:

Maxtrack 5-Way HDMI Switch packaging

Figure 2.1: Product packaging showing the HDMI switch, remote, and cables.

3. Produkto ypatybės

Priekyje view of Maxtrack 5-Way HDMI Switch with Input 1, Input 5, and Output ports

3.1 pav.: priekis view of the HDMI switch showing Input 1, Input 5, and Output ports.

Šoninė view of Maxtrack 5-Way HDMI Switch with Input 2, Input 3, and Input 4 ports

3.2 pav.: šonas view of the HDMI switch showing Input 2, Input 3, and Input 4 ports.

4. Sąranka

Follow these steps to set up your Maxtrack 5-Way HDMI Switch:

  1. Prijunkite HDMI šaltinio įrenginius: Connect up to five HDMI source devices (e.g., game console, Blu-ray player) to the HDMI Input ports (IN PUT 1-5) on the switch using HDMI cables.
  2. Prisijungti prie ekrano: Connect one end of an HDMI cable to the HDMI Output port (OUT PUT) on the switch and the other end to the HDMI input of your display (TV, monitor, projector).
  3. Prijunkite IR imtuvą: Plug the IR Receiver Cable into the designated IR port on the HDMI switch. Position the IR receiver in a location where it can receive signals from the remote control.
  4. Prijunkite maitinimą: Connect the USB Power Cable to the power input port on the HDMI switch. Plug the other end of the USB cable into a USB power source (e.g., a USB port on your TV, a USB wall adapter).
  5. Maitinimas: Ensure all connected devices and the display are powered on.
Maxtrack 5-Way HDMI Switch connected with IR receiver cable and USB power cable

Figure 4.1: HDMI switch with IR receiver and USB power cable connected.

Close-up of the IR receiver cable

Figure 4.2: The IR receiver cable.

Close-up of the USB power cable

Figure 4.3: The USB power cable.

5. Naudojimo instrukcijos

Once the setup is complete, you can switch between your connected HDMI devices using one of two methods:

5.1 Using the Button on the Device

5.2 IR nuotolinio valdymo pulto naudojimas

Maxtrack HDMI Switch remote control with numbered buttons

Figure 5.1: The IR remote control for the HDMI switch.

6. Priežiūra

To ensure the longevity and optimal performance of your HDMI switch, follow these maintenance guidelines:

7. Problemų sprendimas

If you encounter issues with your Maxtrack 5-Way HDMI Switch, refer to the following common problems and solutions:

ProblemaGalima priežastisSprendimas
Ekrane nėra signalo.
  • Atsilaisvinusios HDMI kabelio jungtys.
  • Incorrect input selected on switch or display.
  • Power issue with the switch.
  • Nesuderinama raiška / atnaujinimo dažnis.
  • Įsitikinkite, kad visi HDMI kabeliai yra tvirtai prijungti.
  • Verify the correct input is selected on both the HDMI switch and your display.
  • Check if the USB power cable is properly connected and receiving power.
  • Try a different HDMI cable or reduce the resolution/refresh rate of the source device if possible.
Nuotolinio valdymo pultas neveikia.
  • IR receiver not properly connected or positioned.
  • Kliūtis tarp nuotolinio valdymo pulto ir IR imtuvo.
  • Išsikrovė nuotolinio valdymo pulto baterija.
  • Ensure the IR receiver cable is fully plugged in and positioned to have a clear line of sight to the remote.
  • Remove any objects blocking the path between the remote and the IR receiver.
  • Pakeiskite nuotolinio valdymo pulto bateriją.
Mirgantis arba iškraipytas vaizdas.
  • Poor quality HDMI cables.
  • Cable length too long.
  • Trukdymas.
  • Use high-quality, certified HDMI cables.
  • Try shorter HDMI cables if possible.
  • Ensure the switch is not placed near devices that emit strong electromagnetic interference.

8. Specifikacijos

FunkcijaDetalė
Modelio numerisCS 1-5 L
Prekės ženklasMaxtrack
Įėjimai5x HDMI
Išvestis1x HDMI
Palaikomos rezoliucijosUp to 4K @ 30Hz, Full HD (1080p), 3D
HDCP palaikymasTaip
Giliai spalva48 bitų
Pralaidumas340 MHz
Duomenų perdavimo greitis10.2 Gbps
Garso formataiSupports uncompressed audio (e.g., LPCM)
Kontrolės metodaiManual button, IR Remote Control
Gaminio matmenys190D x 25W x 90H millimeters (19 x 2.5 x 9 cm)
Svoris120 g
SpalvaJuoda
Jungties tipasHDMI
Suderinami įrenginiaiDVD Player, Gaming Console, Television

9. Garantija ir palaikymas

Dėl garantijos informacijos ir techninės pagalbos žr. kartu su pirkiniu pateiktus dokumentus arba susisiekite su pardavėju. Išsaugokite pirkimo įrodymą, jei prireiktų pateikti garantijos pretenziją.

Susiję dokumentai - CS 1-5 L

Preview MAXTRACK FP 8 ARL Antenna Amplifier – Naudotojo vadovas ir specifikacijos
User manual and technical specifications for the MAXTRACK FP 8 ARL 2-way TV antenna amplifier, covering features, optimal signal levels, safety, and maintenance.
Preview MAXTRACK FP 8 ARL Antennenverstärker - Bedienungsanleitung und technische Daten
Detaillierte Bedienungsanleitung und technische Daten für den MAXTRACK FP 8 ARL 2-Geräte TV-Antennenverstärker. Beinhaltet Merkmale, Installation, Sicherheitshinweise und Wartung.
Preview CENMATE 4K HDMI 1:8 skirstytuvo naudotojo vadovas
CENMATE-HD108SP4K, 4K HDMI 1:8 skirstytuvo, palaikančio 4Kx2K@30Hz, HDCP, EDID ir 3D vaizdo įrašus, naudotojo vadovas. Šiame dokumente pateikiamos gaminio specifikacijos, funkcijos, pakuotės turinys ir naudojimo instrukcijos.
Preview CONCORD AC5009 8K60 HDMI 4 kanalų skirstytuvas – naudojimo instrukcija ir funkcijos
Išsami CONCORD AC5009 8K60 HDMI 4 kanalų skirstytuvo naudojimo instrukcija. Sužinokite apie saugą, funkcijas, gaminio diagramą, prijungimą, trikčių šalinimą, specifikacijas ir garantiją. Palaiko 8K@60Hz, 4K@120Hz, HDR ir HDCP 2.3.
Preview „UGREEN HDMI“ komutatorius 3 įėjimai 1 išėjimai (CM332): naudotojo vadovas ir specifikacijos
Išsamus „UGREEN“ HDMI komutatoriaus su 3 įėjimais ir 1 išėjimu (CM332 modelis) vadovas. Sužinokite, kaip prijungti, valdyti ir suprasti jo specifikacijas, kad būtų galima sklandžiai perjungti garso ir vaizdo signalus.
Preview HDMI 2.0 Switcher 3-in-1-Out: Features, Specifications, and Troubleshooting Guide
Šiame dokumente pateikiama visapusiška informacijaview of the HDMI 2.0 switcher, including its introduction, key features, detailed specifications, connection diagram, and troubleshooting guide for optimal performance.