1. Įvadas
The TRENDnet TC-NTP1 Inline PoE Tester is a compact tool designed for network professionals. It provides accurate testing for various Power over Ethernet (PoE) technologies, including 4PPoE, PoE+, PoE, and passive PoE. This device operates inline between a PoE source (PSE) and a PoE device (PD), offering real-time data on wattage, ttage ir amperage. It is compatible with IEEE 802.3af/at/bt PoE devices up to 100W and non-standard passive PoE devices ranging from 11V to 60V.
2. Pagrindinės savybės
- PoE Technology Support: Tests 4PPoE, PoE+, PoE, and passive PoE.
- Stebėjimas realiuoju laiku: Rodo vatątage, ttage ir amperage of the connected PoE device.
- Multiple Testing Modes: Includes T-mode for PSE device testing, N-mode for non-standard passive PoE, and I-mode for inline PoE testing.
- Patogus veikimas: Battery-free design for immediate use.
- Suderinamumas: Supports IEEE 802.3af/at/bt PoE devices up to 100W and passive PoE from 11V – 60V.
- Step Button Functionality: Allows cycling through and locking display readouts for voltage, amperage, ir vattage.
- Gigabito prievadai: Equipped with one Gigabit port for PSE connection and one Gigabit port for PoE device connection.
- Atitinka NDAA reikalavimus: Suitable for government networking solutions (U.S. and Canada Only).
3. Pakuotės turinys
- TRENDnet TC-NTP1 Inline PoE Tester
- Greito montavimo vadovas
4. Produktas baigtasview
4.1 pav.: Kampinis view of the TRENDnet TC-NTP1 Inline PoE Tester, showing the display and ports.
4.2 paveikslas: viršuje view of the TC-NTP1, highlighting the LED display for Mode A (End-span) and Mode B (Mid-span) and the 'STEP' button.
4.3 pav.: priekis view of the TC-NTP1, showing the PSE (Power Sourcing Equipment) Gigabit Ethernet port.
4.4 pav. Apačia view of the TC-NTP1, showing the product information label.
5. Sąranka
- Ensure the TC-NTP1 is free from any physical damage.
- The device is battery-free and ready for use upon connection. No external power source is required for its operation.
- Identify the Power Sourcing Equipment (PSE) and the Powered Device (PD) in your network setup.
6. Naudojimo instrukcijos
6.1. Testerio prijungimas
- Connect the Ethernet cable from your PoE source (e.g., PoE switch or injector) to the PSE port on the TC-NTP1.
- Prijunkite Ethernet kabelį iš PD port on the TC-NTP1 to your PoE device (e.g., IP camera, access point).
- The TC-NTP1 will automatically power on and begin displaying information.
6.2. Testing Modes
The TC-NTP1 offers three distinct testing functions:
- T-mode (PSE Device Testing): This mode is used to determine the PoE type and voltage output of your Power Sourcing Equipment (PSE), such as a PoE switch or injector. Connect the PSE directly to the tester's PSE port.
- N-mode (Non-Standard Passive PoE Devices): Designed for testing non-standard passive PoE devices. This mode supports devices with voltage svyruoja nuo 11 V iki 60 V.
- I-mode (PoE Inline Testing): For real-time monitoring, connect the tester inline between the PSE and the Powered Device (PD). This mode displays the voltage, amperage, ir vattage being delivered to the connected PD.
6.3. Using the Step Button
The ŽINGSNIS button on the TC-NTP1 allows you to cycle through the displayed readouts (voltage, amperage, ir vattage). Pressing the button repeatedly will switch between these values. You can also press and hold the button to lock the display on a specific readout for continuous monitoring.
7. Specifikacijos
| Funkcija | Detalė |
|---|---|
| Modelio numeris | TC-NTP1 |
| Prekės ženklas | „TRENDnet“ |
| PoE standartai | IEEE 802.3af, 802.3at, 802.3bt |
| Supported PoE Types | 4PPoE, PoE+, PoE, Passive PoE |
| Maksimali galia | Iki 100W |
| Pasyvus PoE Voltage Diapazonas | 11V – 60V |
| Uostai | 1 x Gigabit PSE, 1 x Gigabit PD |
| Ekranas | LED (Wattage, ttage, Amperage, Polarity) |
| Maitinimo šaltinis | Battery-Free (Powered by PoE) |
| Matmenys (I x P x A) | 3.9 x 1.4 x 1 colio (99 x 36 x 25 mm) |
| Svoris | 2.82 uncijų (0.08 kg) |
| Darbinė temperatūra | nuo 32 °F iki 122 °F (nuo 0 °C iki 50 °C) |
| Sertifikatai | CE, FCC |
8. Problemų sprendimas
- Nėra ekrano / maitinimo: Ensure the PoE source is active and providing power. The TC-NTP1 is battery-free and draws power from the PoE connection. Verify the Ethernet cables are properly connected and functional.
- Neteisingi skaitymai: Double-check that the cables are securely connected to the correct PSE and PD ports. Ensure the PoE source and device are compatible with the tester's supported standards.
- Device Not Powering On (PD): If the PoE device connected to the PD port is not powering on, use T-mode to test the PSE directly to confirm it is supplying power correctly. Then, use I-mode to check the inline power delivery.
- Polarity Issues: The tester indicates polarity. If a "REV" (Reverse Polarity) LED illuminates, there may be an issue with the PoE source or cabling.
9. Priežiūra
- Valymas: Įrenginį valykite minkšta, sausa šluoste. Nenaudokite skystų ar aerozolinių valiklių.
- Saugykla: Laikykite prietaisą vėsioje, sausoje vietoje, apsaugotoje nuo tiesioginių saulės spindulių ir ekstremalių temperatūrų.
- Tvarkymas: Handle the device with care to prevent physical damage to the ports or internal components.
10. Garantija ir palaikymas
The TRENDnet TC-NTP1 Inline PoE Tester is backed by a 2-year TRENDnet Manufacturer Protection from the date of purchase. For technical assistance or warranty claims, please contact TRENDnet's customer support.
TRENDnet provides reliable technical support with English-speaking advisors and experts available during normal business hours. For support, visit the official TRENDnet website or refer to the contact information provided in the Quick Installation Guide.
Norėdami gauti daugiau informacijos, apsilankykite TRENDnet Store on Amazon.
