1. Įvadas
This manual provides comprehensive instructions for the installation, operation, and maintenance of your ErGear Single Monitor Mount, Model EGSS7. This monitor arm is designed to enhance your workspace ergonomics by providing adjustable positioning for a single monitor. Please read this manual thoroughly before installation and retain it for future reference.
Image 1.1: The ErGear Single Monitor Arm (Model EGSS7) in a typical office setup.
2. Saugos informacija
Please observe the following safety precautions to prevent injury or damage to your equipment:
- Neviršykite maksimalaus svorio pajėgumo – 14.3 kg (6.5 svarų).
- Ensure your monitor is between 17 and 27 inches in size.
- Verify that your monitor is VESA compatible (75x75mm or 100x100mm).
- Install the mount on a sturdy desk surface that can support the combined weight of the mount and your monitor.
- Follow all installation steps carefully. Improper installation may result in equipment damage or personal injury.
- Smulkias dalis laikykite vaikams nepasiekiamoje vietoje.
3. Pakuotės turinys
Before proceeding with installation, please ensure all components are present and undamaged. Refer to the included parts list for detailed identification.
3.1 vaizdas: Baigtaview of the ErGear Single Monitor Mount components.
4. Specifikacijos
| Funkcija | Specifikacija |
|---|---|
| Prekės ženklas | Ergear |
| Modelis | EGSS7 |
| Suderinamas monitoriaus dydis | 17–27 colių |
| Svorio talpa | Iki 14.3 svarų (6.5 kg) |
| VESA suderinamumas | 75x75mm, 100x100mm |
| Montavimo tipas | C-clamp arba Grommet |
| Medžiaga | Legiruotasis plienas |
| Spalva | Juoda |
| Pakreipimo diapazonas | -35° iki +50° |
| Pasukamas diapazonas | -90° iki +90° |
| Rotacija | 360° |
| Gaminio matmenys | 41.2 x 30.4 x 10 cm |
Image 4.1: Monitor size and weight capacity details.
5. Sąrankos instrukcijos
The ErGear Single Monitor Mount offers two installation options: C-clamp or Grommet mounting. Choose the option best suited for your desk.
Image 5.1: C-clamp and Grommet mounting options with desk thickness ranges.
5.1 C-Clamp Montavimas
- Pritvirtinkite C-clamp to the base of the monitor arm.
- Padėkite C-clamp on the edge of your desk. Ensure the desk thickness is between 0.4 and 3.3 inches.
- Priveržkite klipąamp securely using the provided knob until the mount is stable.
5.2 Grommet Installation
- If your desk has a grommet hole, insert the grommet bolt through the base of the monitor arm and the desk hole. Ensure the desk thickness is between 0.4 and 3.1 inches.
- Secure the mount from underneath the desk using the provided plate and nut.
5.3 Monitoriaus prijungimas
- Carefully attach your VESA-compatible monitor to the VESA plate on the arm using the appropriate screws.
- Ensure the screws are tightened firmly but do not overtighten.
5.4 Įtempimo reguliavimas
The gas spring arm requires tension adjustment to properly support your monitor's weight. Use the included Allen key to adjust the tension screw located on the arm. Turn clockwise to increase tension for heavier monitors, and counter-clockwise to decrease tension for lighter monitors. Adjust until the monitor stays in position when moved.
5.2 pav.: Vidinis view of the flexible gas spring arm.
6. Naudojimo instrukcijos
Once installed, your ErGear monitor mount allows for flexible positioning of your monitor.
6.1 Monitoriaus padėties reguliavimas
- Aukščio reguliavimas: Gently push or pull the monitor to the desired height. The gas spring mechanism will hold it in place.
- Pakreipti: The monitor can be tilted from -35° to +50° to reduce glare and optimize viewkampų.
- Sukamasis: Swivel the monitor from -90° to +90° for collaborative work or to view content from different angles.
- Pasukimas: Pasukite monitorių 360°, kad perjungtumėte tarp horizontalios ir vertikalios orientacijos.
Image 6.1: Monitor height adjustment.
Image 6.2: Full motion range capabilities of the monitor arm.
6.2 Kabelių valdymas
The monitor arm features an integrated cable management system to keep your workspace tidy. Route your monitor cables through the designated channels on the arm to conceal them.
6.3 pav.: Integruota kabelių valdymo sistema.
7. Priežiūra
Reguliarus monitoriaus laikiklio aptarnavimas užtikrina jo ilgaamžiškumą ir optimalų veikimą.
- Periodiškai patikrinkite visus varžtus ir jungtis, kad įsitikintumėte, jog jie yra tvirtai priveržti.
- Clean the surface of the mount with a soft, damp audinys. Venkite abrazyvinių valiklių.
- Re-adjust the gas spring tension if your monitor feels too loose or too stiff when moving.
8. Problemų sprendimas
| Problema | Galima priežastis | Sprendimas |
|---|---|---|
| Monitorius nusviręs arba nelieka savo vietoje. | Gas spring tension is too low. | Increase gas spring tension using the Allen key (clockwise). |
| Monitor is difficult to move. | Gas spring tension is too high. | Decrease gas spring tension using the Allen key (counter-clockwise). |
| Kalnas jaučiasi nestabilus. | C-clamp or grommet connection is loose. | Priveržkite C-clamp knob or grommet nut. |
| Monitor does not fit the VESA plate. | Incorrect VESA pattern. | Ensure your monitor has a 75x75mm or 100x100mm VESA pattern. |
9. Garantija ir palaikymas
For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official ErGear website. Please have your model number (EGSS7) and purchase date available when contacting support.
