Įvadas
Thank you for choosing the Parkside PDR 12 A1 Mobile Pressure Washer. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your device. Please read these instructions carefully before first use and keep them for future reference. This mobile pressure washer is designed for removing dirt, loam, and sand from various surfaces such as rims, shoes, and garden tools.
Saugos instrukcijos
Naudodami elektros prietaisus, visada laikykitės pagrindinių saugos priemonių, kad sumažintumėte gaisro, elektros smūgio ir sužalojimo riziką.
- Perskaitykite visas instrukcijas: Susipažinkite su slėginio plovimo įrenginio valdikliais ir tinkamu naudojimu.
- Dėvėkite tinkamas apsaugos priemones: Always wear eye protection and suitable clothing to protect against spray and debris.
- Laikykite vaikus ir naminius gyvūnus atokiau: Neleiskite vaikams ar neapmokytiems asmenims valdyti slėginio plovimo įrenginio.
- Venkite tiesioginio purškimo ant žmonių ar gyvūnų: The high-pressure jet can cause serious injury.
- Patikrinkite, ar nėra pažeidimų: Before each use, inspect the device, hose, and connections for any damage. Do not use if damaged.
- Use only clean water: Do not use corrosive liquids or chemicals that could damage the device or pose a health risk.
- Saugūs ryšiai: Ensure all hose and gun connections are securely fastened before operation.
- Protect from water ingress: Although splash-proof (IP44), avoid submerging the unit or exposing it to heavy rain.
- Baterijos sauga: Use only the specified charger for the integrated lithium-ion battery. Do not expose the battery to extreme temperatures or direct sunlight.
Produktas baigtasview ir komponentai
The Parkside PDR 12 A1 Mobile Pressure Washer consists of several key components designed for portability and ease of use.


Pagrindiniai komponentai apima:
- Pagrindinis blokas: Houses the pump, battery, and control electronics.
- Nuimamas vandens bakas: 5-liter capacity with a carrying handle.
- Purkštuvas: Handheld with a flat jet nozzle for effective cleaning.
- Spiral Hose: Approximately 2.8 meters long, connects the unit to the spray gun.
- 12-Volt Car Connection Cable: For external power supply.
- LED Charging Status Indicator: Displays battery charge level.
- Sandėliavimo skyrius: Integrated into the housing for the hose and spray gun.
Sąranka
- Įkraukite akumuliatorių:
- Before first use, fully charge the integrated lithium-ion battery using the supplied 60-minute fast charger.
- Connect the charger to a suitable power outlet and to the charging port on the pressure washer.
- The LED charging status indicator will show the charging progress. The charger features automatic charge cut-off to prevent overcharging.
- Užpildykite vandens baką:
- Remove the 5-liter water tank from the main unit by lifting it using its carrying handle.
- Fill the tank with clean water. Do not exceed the maximum fill line.
- Place the filled water tank back into the main unit, ensuring it is securely seated.
- Connect the Hose and Spray Gun:
- Uncoil the spiral hose from its storage compartment.
- Connect one end of the spiral hose to the outlet on the main unit and the other end to the spray gun. Ensure all connections are tight to prevent leaks.
- Optional: Connect to 12-Volt Car Adapter:
- If using the 12-volt car connection mode, plug the supplied cable into the designated port on the pressure washer and into your vehicle's 12V socket.
- Ensure the vehicle's engine is running to provide stable power and prevent draining the car battery.
Naudojimo instrukcijos
- Maitinimas:
- Press the power button on the main unit to turn on the pressure washer. The LED indicator will illuminate.
- If operating via the 12-volt car adapter, ensure the car engine is running.
- Siurblio užpildymas:
- Before spraying, point the spray gun in a safe direction and press the trigger until a steady stream of water emerges. This removes any air from the system.
- Purškimo pistoleto naudojimas:
- Hold the spray gun firmly. The flat jet nozzle provides a wide spray pattern suitable for general cleaning.
- Maintain a safe distance from the surface being cleaned to avoid damage. Start further away and move closer if more pressure is needed.
- Always spray away from electrical components or sensitive areas.
- Valymo procedūra:
- Apply water to the surface to loosen dirt.
- Work from top to bottom on vertical surfaces to allow dirt to run off.
- For stubborn dirt, allow the water to soak for a few moments before rinsing.
- Išjungti:
- After use, release the spray gun trigger.
- Press the power button on the main unit to turn off the pressure washer.
- If using the 12-volt car adapter, disconnect it from the vehicle's socket.
- Depressurizing the System:
- Point the spray gun in a safe direction and press the trigger to release any remaining pressure in the hose and gun.
Priežiūra
Reguliarus valymas užtikrina jūsų slėginės plovyklos ilgaamžiškumą ir optimalų veikimą.
- Išvalykite įrenginį: Po kiekvieno naudojimo nuvalykite slėginio plovimo įrenginio išorę drėgnu valikliu.amp audinys. Nenaudokite abrazyvinių valiklių.
- Drain and Store Water Tank: Empty any remaining water from the tank. Clean the tank if necessary and allow it to air dry before storage to prevent mold or odor.
- Hose and Spray Gun Storage: Coil the spiral hose neatly and store it, along with the spray gun, in the designated compartment on the unit.
- Akumuliatoriaus priežiūra: For long-term storage, ensure the battery is partially charged (around 50-70%). Store the unit in a cool, dry place away from direct sunlight and extreme temperatures. Recharge the battery every few months if not in use to maintain its health.
- Patikrinkite jungtis: Periodically inspect all hose and gun connections for wear or damage. Replace any worn parts immediately.
Trikčių šalinimas
Jei kyla problemų dėl slėginio plovimo įrenginio, žr. šias dažniausiai pasitaikančias problemas ir jų sprendimus:
| Problema | Galima priežastis | Sprendimas |
|---|---|---|
| Įrenginys neįsijungia. | Battery is discharged or not properly connected. 12V adapter not connected or car engine off. | Charge the battery. Ensure 12V adapter is securely connected and car engine is running. |
| Nėra vandens slėgio arba žemas slėgis. | Water tank empty. Air in the system. Clogged nozzle. | Refill water tank. Prime the pump by pressing the trigger until steady water flow. Clean the nozzle. |
| Iš jungčių teka vanduo. | Loose connections. Damaged O-rings or seals. | Tighten all hose and gun connections. Inspect and replace any damaged O-rings or seals. |
| Įrenginys sustoja veikimo metu. | Battery discharged. Overheating. | Recharge the battery. Allow the unit to cool down before resuming operation. |
Jei problema išlieka ir išbandžius šiuos sprendimus, susisiekite su klientų aptarnavimo tarnyba.
Specifikacijos
| Modelis | PDR 12 A1 |
| Darbinis slėgis | Approx. 0.5 Mpa (5 bar) |
| Baterijos tipas | Lithium-ion 12 Volt max (approx. 2.0 Ah) |
| Įkroviklis | 60-minute fast charger with automatic charge cut-off |
| Maksimalus srauto greitis | Approx. 2 liters/minute |
| Būsto medžiaga | Polipropilenas |
| Tanko medžiaga | Polipropilenas |
| Matmenys (apytiksliai) | Ø 29.5 x A 21 cm |
| Spiral Hose Length (max.) | 2.8 metrų |
| Vandens rezervuaro talpa | Apytiksliai 5 litrai |
| Apsaugos klasė | IP44 (atsparus purslams) |
Garantija ir palaikymas
For warranty information, please refer to the documentation provided with your purchase or visit the official Parkside website. If you require technical support or have questions not covered in this manual, please contact Parkside customer service.





