Intex 58414EP

Intex Pineapple Baby Pool Instruction Manual

Modelis: 58414EP

1. Produktas baigtasview

The Intex Pineapple Baby Pool is designed for young children aged 1 to 3 years. It features a built-in sunshade for partial protection from sunlight and a soft inflatable floor for comfort. The pool has an approximate water capacity of 12 gallons (45 liters) with a 5-inch wall height. Inflated dimensions are approximately 40 inches (102 cm) long by 37 inches (94 cm) wide.

Intex Pineapple Baby Pool with dimensions and features

1 vaizdas: Baigtaview of the Intex Pineapple Baby Pool, highlighting its soft inflatable floor and recommended age range of 1-3 years. Approximate inflated size is 39in x 37in (99cm x 94cm).

2. Saugos informacija

WARNING: ADULT SUPERVISION REQUIRED AT ALL TIMES.

This is not a life-saving device. Children can drown in very small amounts of water. Empty the pool when not in use. Do not install the paddling pool over concrete, asphalt, or any other hard surface. Keep children within arm's reach. See product for additional warnings and safety labels.

3. Sąrankos instrukcijos

  1. Pasirinkite vietą: Select a level, soft surface (such as grass) for setting up the pool. Ensure there are no sharp objects or debris that could puncture the pool. Avoid concrete, asphalt, or other hard surfaces.
  2. Išskleiskite baseiną: Atsargiai išimkite baseiną iš pakuotės ir visiškai išskleiskite jį ant pasirinkto paviršiaus.
  3. Pripūskite baseiną: The pool has multiple air chambers. Locate the inflation valves for the main ring, the soft inflatable floor, and the built-in sunshade. Use an air pump (not included) to inflate each chamber until it is firm to the touch but not over-inflated. Ensure all valves are securely closed after inflation.
  4. Užpildykite vandeniu: Once fully inflated, fill the pool with water to the recommended level, which is approximately 5 inches (13 cm) of wall height, or 12 gallons (45 liters). Do not overfill.

Video 1: Demonstration of the Intex Pineapple Baby Pool, showing its inflatable bottom and separate inflation points for the main ring and sunshade. This video provides a visual guide to the setup process.

Intex Pineapple Baby Pool with child and features

Image 2: The Intex Pineapple Baby Pool in use, illustrating the built-in sunshade for partial protection and the soft inflatable floor. It also mentions the approximate water capacity of 12 gallons (45L) and the importance of setting up on level ground.

4. Naudojimo instrukcijos

Once the pool is set up and filled, children can enjoy splashing and playing. The built-in sunshade offers partial protection from direct sunlight. Always ensure an adult is actively supervising children in and around the pool.

Video 2: A demonstration of the Intex Pineapple Baby Pool, highlighting its bright colors, shallow depth suitable for babies to sit and splash, and the protective sunshade feature.

5. Priežiūra

  • Valymas: Regularly clean the pool with mild soap and water. Rinse thoroughly. Do not use abrasive cleaners or brushes.
  • Nusausinimas: To drain the pool, open the drain valve (if present) or carefully tip the pool to empty the water.
  • Džiovinimas: Ensure the pool is completely dry before deflating and storing to prevent mold and mildew.
  • Saugykla: Deflate all air chambers, fold the pool neatly, and store it in a cool, dry place away from direct sunlight and extreme temperatures. Keep it away from sharp objects.

6. Problemų sprendimas

  • Slow Deflation: If the pool slowly deflates, check all inflation valves to ensure they are securely closed. Inspect the pool surface for small punctures. A repair patch is typically included with the product for minor repairs.
  • Uneven Inflation: Ensure all air chambers are inflated evenly. If one section appears softer, add more air to that specific chamber.
  • Vandens nutekėjimas: Check for visible tears or holes. Use the provided repair patch according to its instructions to seal any leaks.

7. Specifikacijos

FunkcijaDetalė
Prekės ženklasIntex
Modelio numeris58414EP
Gaminio matmenys (pripūstos)40" ilgio x 37" pločio x 5" aukščio (102 cm x 94 cm x 13 cm)
MedžiagaPlastikiniai
Talpa12 Gallons (45 Liters) at 5in wall height
Amžiaus intervalas (rekomenduojamas)12 mėnesių – 3 metų
Ypatinga funkcijaInflatable, Built-in Sunshade, Soft Inflatable Floor
Prekės svoris3.5 svaro (1.59 kilogramo)
Įtraukti komponentaiBaseinas, Remonto lopas

8. Garantija ir palaikymas

For warranty information or product support, please refer to the documentation included with your purchase or contact Intex customer service directly. Specific warranty details are not provided in this manual.

Susiję dokumentai - 58414EP

Preview „Intex“ karkasinio baseino komplekto šeimos naudotojo vadovas – modeliai 260 x 160 x 65 cm ir kiti
Išsamus „Intex Frame Pool Set Family“ modelių naudotojo vadovas, įskaitant įrengimo instrukcijas, priežiūros gaires, trikčių šalinimo patarimus ir garantijos informaciją, kad baseino naudojimas būtų saugus ir malonus.
Preview „INTEX Easy Set“ baseino naudotojo vadovas: sąrankos, saugos ir priežiūros vadovas
Išsamus INTEX „Easy Set“ baseinų (6–18 pėdų modelių) naudotojo vadovas. Jame pateikiamos svarbiausios saugos taisyklės, įrengimo instrukcijos, priežiūros patarimai, trikčių šalinimo ir garantijos informacija, kad baseino naudojimas būtų saugus ir malonus.
Preview „Intex“ automatinio baseino valiklio naudotojo vadovas ir sąrankos vadovas
Išsamus „Intex“ automatinio baseino valiklio naudotojo vadovas. Jame yra įrengimo instrukcijos, dalių sąrašas, valymo vadovai, trikčių šalinimo patarimai ir saugos informacija, kaip prižiūrėti baseino valytuvą.
Preview „Intex Prism Frame“ ovalus baseinas, 503 x 274 x 122 cm – modelis 55213 | Produkto informacija ir sauga
Raskite svarbiausią „Intex Prism Frame Oval“ baseino (55213 modelis) gaminio informaciją ir saugos įspėjimus. Pateikiami matmenys, talpa, pridedami priedai, gamintojo kontaktinė informacija ir svarbios naudojimo gairės.
Preview „Intex“ elektrinis baseino šildytuvas HT30221-2, naudotojo vadovas
Šiame naudotojo vadove pateikiamos pagrindinės saugos taisyklės, įrengimo instrukcijos, naudojimo procedūros, trikčių šalinimo vadovas ir garantijos informacija, skirta „Intex HT30221-2“ elektriniam baseino šildytuvui. Sužinokite, kaip saugiai sumontuoti, naudoti ir prižiūrėti baseino šildytuvą, kad jis veiktų optimaliai.
Preview INTEX naudotojo vadovas: įmontuotas „Fast-Fill™“ elektrinis siurblys, modelis AP619A
Išsamus INTEX įmontuoto „Fast-Fill™“ elektrinio siurblio, modelio AP619A, naudotojo vadovas, kuriame pateikiamos esminės saugos instrukcijos, pripūtimo ir išleidimo procedūros, svarbios pastabos apie pripučiamo čiužinio priežiūrą ir laikymo gairės. Sužinokite, kaip tinkamai naudoti ir prižiūrėti INTEX pripučiamą čiužinio siurblį.