Insta360 Suction Cup Mount Instruction Manual

1. Produktas baigtasview

The Insta360 Suction Cup Mount is designed for securely attaching your Insta360 camera to smooth, flat surfaces, such as car windows or body panels. Its robust design and adjustable double ball mount allow for versatile camera positioning to capture a wide range of perspectives.

• Designed for Versatility: Ideal for mounting your Insta360 camera inside or on your vehicle.
• Adjustable Double Ball Mount: Provides maximum adjustability for achieving various camera angles.
• Stiprus siurbimo taurė: Ensures a firm and reliable attachment to smooth, flat surfaces.
• Patvari konstrukcija: Made from tough, high-strength aluminum alloy.
• Kompaktiškas ir nešiojamas: Small, foldable design for easy storage and transport.

1 pav.: priekis view of the Insta360 Suction Cup Mount. This image displays the mount's main components, including the suction cup base, the double ball arm, and the camera attachment point.

2. Sąrankos instrukcijos

1. Paruoškite montavimo paviršių: Ensure the surface where the suction cup will be attached is clean, dry, and smooth. Wipe away any dust, dirt, or moisture.
2. Pritvirtinkite fotoaparatą: Secure your Insta360 camera to the mount's attachment point. Ensure it is firmly tightened.
3. Siurbimo taurės padėtis: Press the suction cup firmly against the prepared surface. Flip the lever on the suction cup base to create a vacuum seal, securing the mount in place.
4. Patikrinkite siurbimą: Gently tug on the mount to ensure it is securely attached before mounting your camera.

2 paveikslas: viršuje view of the suction cup base. This image highlights the lever mechanism used to activate the vacuum seal for secure attachment.

3. Naudojimo instrukcijos

1. Kampo reguliavimas: Loosen the central knob on the double ball mount to adjust the camera's angle. The double ball design allows for extensive flexibility in positioning.
2. Kampo fiksavimas: Once the desired angle is achieved, tighten the central knob firmly to lock the mount in position.
3. Rekomenduojamas naudojimas: For optimal performance and safety, ensure the mount is used on clean, non-porous, and flat surfaces. Avoid mounting on textured or curved surfaces.

3 pav.: šonas view of the mount, illustrating the double ball joint for angle adjustments. The central knob is used to loosen and tighten the joints.

Figure 4: An Insta360 camera securely mounted on a car hood using the suction cup mount, demonstrating a typical outdoor application.

4. Priežiūra

• Išvalykite siurbimo taurę: Regularly clean the rubber suction cup with mild soap and water to remove any residue that could impair its grip. Allow it to air dry completely.
• Patikrinkite, ar nėra pažeidimų: Periodically check the suction cup and the mount's components for any signs of wear, cracks, or damage. Replace if necessary.
• Saugykla: Store the mount in a clean, dry place away from direct sunlight and extreme temperatures to preserve the integrity of the rubber suction cup.

5. Problemų sprendimas

• Silpnas siurbimas: If the mount does not adhere properly, ensure the mounting surface is perfectly clean, dry, and smooth. Avoid porous or textured surfaces. Extreme temperatures can also affect suction; try to mount in moderate conditions.
• Mount jaučiasi laisvas: Re-tighten all adjustment knobs on the double ball mount. Ensure the suction cup lever is fully engaged.

6. Specifikacijos

7. Garantija ir palaikymas

Dėl garantijos informacijos ir techninės pagalbos kreipkitės į oficialią „Insta360“ svetainę. websvetainėje arba susisiekite tiesiogiai su jų klientų aptarnavimo tarnyba. Išsaugokite pirkimo įrodymą, jei prireiktų garantijos.

Visit the official Insta360 Store: Insta360 Store