1. Įvadas
Thank you for choosing the Hifonics GE14004 4-Channel Class A/B Car Ampkeltuvas. Tai amplifier is designed to deliver high-quality audio performance for your vehicle's sound system. With a maximum output of 1400 Watts, this amplifier features a robust design, including a MOSFET power supply, variable crossovers, and bass boost capabilities. This manual provides essential information for proper installation, operation, and maintenance to ensure optimal performance and longevity of your ampgyvesnis.
2. Saugos instrukcijos
- Prieš pradėdami bet kokius elektros darbus, visada atjunkite automobilio akumuliatoriaus neigiamą gnybtą.
- Įsitikinkite, kad visi laidai yra tinkamai išvedžioti ir pritvirtinti, kad jų nepažeistų aštrūs kraštai ar judančios dalys.
- Maitinimo ir įžeminimo jungtims naudokite tinkamo skersmens laidus, kaip nurodyta įrengimo skyriuje.
- Įdiekite ampšaldytuvą tokioje vietoje, kurioje būtų užtikrinta tinkama ventiliacija ir išvengta perkaitimo.
- Venkite montuoti amplifterį vietose, kuriose yra drėgmė arba per didelė vibracija.
- Jei nesate tikri dėl kurių nors montavimo žingsnių, kreipkitės į profesionalų automobilio garso sistemų montuotoją.
- Tai amplifier is equipped with 2-way protection circuitry. Do not attempt to bypass or modify these safety features.
3. Sąranka ir diegimas
3.1 Montavimas Ampgyvybingesnis
The Hifonics GE14004 amplifier is designed for surface mounting. Choose a secure location in your vehicle that is dry, well-ventilated, and protected from direct sunlight or excessive heat. Ensure there is sufficient space around the amplifier for air circulation to prevent overheating. Avoid mounting on carpeted surfaces that may restrict airflow.

1 vaizdas: Į viršų view of the Hifonics GE14004 4-Channel Car Amplifier, showing the Hifonics logo and Gemini series branding. This view illustrates the heat sink design for thermal dissipation.
3.2 Laidų jungtys
Proper wiring is crucial for amplifier performance and safety. Refer to the diagrams below for correct connections.
3.2.1 Įvesties ir valdymo skydas

2 vaizdas: Front panel of the Hifonics GE14004 amplifier, displaying RCA inputs (CH1-CH4), high-level inputs, gain level controls (LEVEL), mode switches (2CH, 4CH, FULL, HP, LP), crossover frequency adjustments (X-OVER), bass EQ, and subsonic filter controls.
- RCA įėjimai: Prijunkite pagrindinio įrenginio RCA išvestis prie amplifier's RCA inputs (CH1-CH4). The RCA Jacks allow for daisy-chaining multiple amplifiers without splitter cords.
- Aukšto lygio įėjimai: If your head unit does not have RCA outputs, use the high-level inputs.
- Gain Control (LEVEL): Reguliuoja įvesties jautrumą, kad atitiktų jūsų pagrindinio įrenginio išvestį.
- Režimo jungiklis: Select between 2-channel or 4-channel operation.
- Crossover (X-OVER):
- PILNAS: Full range audio.
- HP (aukšto dažnio): Allows frequencies above the set point (40Hz-300Hz) to pass.
- LP (žemo dažnio dažnis): Allows frequencies below the set point (40Hz-300Hz) to pass.
- Boso EQ: Adjusts bass boost.
- Pogarsinis filtras: Filters out ultra-low frequencies (10Hz-40Hz) that are inaudible and can damage subwoofers.
- Fazės poslinkis: Adjusts the phase from 0-180 degrees.
3.2.2 Maitinimo ir garsiakalbio išvesties skydelis

3 vaizdas: Rear panel of the Hifonics GE14004 amplifier, showing the power input terminals (GND, REM, +12V), the 60A fuse, and speaker output terminals (CH1-CH4, bridged options).
- GND (žemė): Connect to a clean, unpainted metal surface of the vehicle chassis. Use a short cable of the same gauge as the power cable.
- REM (nuotolinis įjungimas): Connect to the remote output of your head unit. This turns the ampįjunkite ir išjunkite ližiiklį naudodami pagrindinį įrenginį.
- +12 V (maitinimas): Connect directly to the positive terminal of the vehicle's battery. Install an in-line fuse holder (not included) within 18 inches of the battery.
- Lydusis saugiklis: The amplifier includes a 60A fuse. Do not replace with a fuse of a different rating.
- Garsiakalbių išvestys: Connect your speakers to these terminals. The amplifier supports 2 Ohm stable operation. For bridged mode, refer to the markings on the ampgyvesnis.
4. Naudojimo instrukcijos
After completing all wiring connections, double-check them before reconnecting the vehicle's battery.
- Pradinis įjungimas: Reconnect the battery. Turn on your head unit. The ampLifier turėtų įsijungti, tai rodo LED indikatorius (jei yra).
- Stiprinimo reguliavimas: Pradėkite nuo amplifier's gain control set to minimum. Play a familiar piece of music at a moderate volume on your head unit. Slowly increase the ampSumažinkite lifier stiprinimą, kol išgirsite iškraipymą, tada šiek tiek sumažinkite. Taip nustatomas maksimalus švarus garsas.
- Crossover nustatymai: Adjust the High Pass (HP) and Low Pass (LP) filters according to your speaker types and desired sound. For full-range speakers, use HP. For subwoofers, use LP.
- Bass Boost and Subsonic Filter: Adjust these controls to fine-tune the bass response. Use the subsonic filter to protect subwoofers from damaging low frequencies.
- Fazės poslinkis: Experiment with the phase shift (0-180 degrees) to achieve optimal bass integration with your other speakers.
5. Priežiūra
- Valymas: Periodiškai valykite amplifier's exterior with a soft, dry cloth. Do not use harsh chemicals or solvents. Ensure ventilation fins are free from dust and debris.
- Jungtys: Reguliariai tikrinkite visas maitinimo, įžeminimo, nuotolinio valdymo ir garsiakalbių jungtis, kad įsitikintumėte, jog jos yra tvirtos ir nesurūdijusios. Atsilaisvinusios jungtys gali pabloginti veikimą arba sukelti gedimą.
- Saugiklio keitimas: If the fuse blows, replace it only with a fuse of the exact same rating (60A). A repeatedly blown fuse indicates a problem that requires professional diagnosis.
6. Problemų sprendimas
| Problema | Galima priežastis | Sprendimas |
|---|---|---|
| Ampkeltuvas neįsijungia. |
|
|
| Nėra garso išvesties. |
|
|
| Iškraipytas garsas. |
|
|
| Amplifier perkaista. |
|
|
7. Specifikacijos
| Modelio numeris | GE14004 |
| Amppakėlimo klasė | A/B klasė |
| Kanalų skaičius | 4 |
| Išėjimo galia (maks.) | 1400 vatų |
| Galios įvertinimas (RMS) |
|
| Dažnio atsakas | 10Hz - 22KHz |
| Kintamasis žemo dažnio krosoveris | 40Hz - 300Hz |
| Variable High Pass Crossover | 40Hz - 300Hz |
| Subsonic filtras | 10Hz - 40Hz |
| Fazinis poslinkis | 0–180 laipsnių |
| Maitinimo šaltinis | Ultra-Fi MOSFET |
| Apsaugos grandinė | 2-way protection |
| Montavimo tipas | Paviršinis montavimas |
| Darbinė temperatūra | Iki 40 laipsnių Celsijaus |
| Prekės svoris | 8.92 svaro |
| Pakuotės matmenys | 18.11 x 10.98 x 4.17 colio |
| Atitiktis | FCC |
8. Garantija ir palaikymas
Dėl garantijos informacijos ir techninės pagalbos žr. kartu su pirkiniu pateiktus dokumentus arba susisiekite tiesiogiai su gamintoju. Išsaugokite pirkimo įrodymą, jei galėtumėte pateikti pretenzijas dėl garantijos.
Manufacturer: Hifonics





