1. Įvadas
Thank you for choosing the Dlyfull Smart Battery Charger UT1. This intelligent charger is designed to efficiently charge, discharge, test, and refresh AA and AAA Ni-MH/Ni-CD rechargeable batteries. It features an LCD display for monitoring battery status and multiple safety protections to ensure reliable operation. Please read this manual thoroughly before use to ensure proper operation and to maximize the lifespan of your batteries and charger.
2. Saugos informacija
To prevent injury or damage to the charger and batteries, please observe the following safety precautions:
- Only charge Ni-MH and Ni-CD AA/AAA rechargeable batteries. Do not attempt to charge non-rechargeable batteries or other battery types (e.g., Li-ion, Alkaline) as this may cause explosion, rupture, or leakage.
- Įdėdami baterijas į įkroviklio lizdus, įsitikinkite, kad jų poliškumas yra teisingas (+/-).
- Įkroviklio negalima ardyti, modifikuoti ir sukelti trumpojo jungimo.
- Įkroviklį laikykite atokiau nuo vandens, drėgmės ir aukštos temperatūros.
- Do not use the charger if it is damaged or has been exposed to liquids.
- Laikyti vaikams nepasiekiamoje vietoje.
- The charger includes advanced safety features such as over-heat, over-voltage, over-current, short-circuit protection, and defective battery detection.

Image: The Dlyfull Smart Battery Charger highlighting its comprehensive safety features including over-current, over-voltage, reverse, short-circuit protection, and intelligent error alarming.
3. Pakuotės turinys
The Dlyfull Smart Battery Charger UT1 package includes:
- Dlyfull UT1 USB Battery Charger
- Mikro USB laidas
- Vartotojo vadovas (šis dokumentas)

Image: The Dlyfull Smart Battery Charger UT1, showing the charger unit, a Micro USB cable, and four AA/AAA batteries inserted into the slots.
4. Produktas baigtasview
The Dlyfull UT1 is a 4-bay smart charger designed for Ni-MH and Ni-CD AA/AAA batteries. It offers four distinct operating modes and an intelligent LCD display.
Pagrindinės funkcijos:
- Keturi veikimo režimai: Charge, Discharge, Test, and Refresh.
- Individual Slot Control: Each of the four bays operates independently.
- Pasirenkama įkrovimo srovė: Choose from 0.25A, 0.5A, 0.75A, or 1A.
- Išmanusis LCD ekranas: Shows charging status, time, capacity, voltage, and current for each battery.
- Visapusiška sauga: Includes over-heat, over-voltage, over-current, short-circuit protection, and defective battery detection.
- Maitinamas USB: Compatible with various USB power sources for portability.

Image: The Dlyfull Smart Battery Charger with an overlay illustrating its four modes of operation: Charge, Discharge, Test, and Refresh.
5. Sąranka
5.1 Maitinimo prijungimas
- Connect the provided Micro USB cable to the charger's input port.
- Connect the other end of the USB cable to a compatible USB power source (e.g., USB wall adapter, computer USB port, power bank, car charger). The charger requires a 5V input.
- The LCD display will illuminate, indicating the charger is powered on.

Image: The Dlyfull Smart Battery Charger connected to a standard USB wall adapter, demonstrating the power connection setup.
5.2 Baterijų įdėjimas
- Insert one to four AA or AAA Ni-MH/Ni-CD rechargeable batteries into the charging slots.
- Ensure the positive (+) and negative (-) terminals of the batteries match the polarity indicators in the charger slots.
- The charger will automatically detect the battery type and display its current status on the LCD.

Vaizdas: Stambus planas view of the Dlyfull Smart Battery Charger's four slots, showing AA and AAA batteries correctly inserted, ready for charging.
6. Veikimo režimai
The Dlyfull UT1 charger offers four distinct operating modes: Charge, Discharge, Test, and Refresh. Each mode can be selected independently for each battery slot.
6.1 Režimo pasirinkimas
- After inserting batteries, the charger will default to Įkrauti režimu.
- To select a different mode for a specific slot, press the SLOT button repeatedly until the desired slot is highlighted on the LCD.
- Paspauskite REŽIMAS pakartotinai spauskite mygtuką, kad perjungtumėte galimus režimus: Įkrauti, Iškrovimas, Testas, Atnaujinti.
- Once the desired mode is selected, the charger will begin the operation after a few seconds of inactivity or by pressing the REŽIMAS mygtuką dar kartą, kad patvirtintumėte.
6.2 Dabartinis pasirinkimas
The charging current can be adjusted for each slot:
- While a slot is highlighted (before operation starts), press the CURR. button repeatedly to cycle through available charging currents: 0.25A, 0.5A, 0.75A, 1A.
- Select a current appropriate for your battery's capacity. Lower currents are generally safer for smaller capacity batteries and can extend battery life.
6.3 Mode Descriptions
- Įkrovimo režimas: Charges the battery to its full capacity. The LCD will display charging time, current, voltage, and accumulated capacity.
- Iškrovimo režimas: Discharges the battery to remove the "memory effect" often associated with Ni-CD batteries. This mode is useful before a refresh cycle.
- Testavimo režimas: Measures the actual capacity of the battery. The charger will fully charge the battery, then discharge it to measure its capacity, and finally recharge it. The measured capacity in mAh/Ah will be displayed.
- Atnaujinimo režimas: Designed to restore older batteries to their maximum capacity. This mode typically involves multiple charge-discharge cycles to break down crystal formations within the battery.

Image: The Dlyfull Smart Battery Charger's intelligent LCD display, showing detailed information such as charging time, voltage, current, and charged capacity for each battery slot.
7. Priežiūra
- Clean the charger and battery contacts regularly with a dry, soft cloth to ensure optimal connection.
- Nenaudokite abrazyvinių valiklių ar tirpiklių.
- Nenaudojamą įkroviklį laikykite vėsioje, sausoje vietoje.
- Venkite įkroviklio numetimo ir stiprių smūgių.
8. Problemų sprendimas
| Problema | Galima priežastis | Sprendimas |
|---|---|---|
| Įkroviklis neįsijungia. | No power supply, faulty USB cable, or faulty power adapter. | Check USB cable connection. Try a different USB port or power adapter. |
| Akumuliatorius neįkraunamas. | Incorrect battery type, incorrect polarity, defective battery, or poor contact. | Ensure battery is Ni-MH/Ni-CD and correctly inserted. Clean battery contacts. Replace defective battery. |
| LCD displays "ERR" or similar error. | Defective battery, short-circuit, or over-temperature. | Remove and reinsert the battery. If error persists, the battery may be defective. Allow charger to cool if hot. |
| Charging process is slow. | Low charging current selected, or power source is insufficient. | Increase charging current using the CURR. button. Use a higher-output USB power adapter (e.g., 5V/2A). |
9. Specifikacijos
| Modelis | UT1 |
| Suderinami baterijų tipai | AA, AAA Ni-MH, Ni-CD Rechargeable Batteries |
| Įvesties tomastage | 5 voltų |
| Įkrovimo srovės parinktys | 0.25A, 0.5A, 0.75A, 1A |
| Veikimo režimai | Charge, Discharge, Test, Refresh |
| Ekranas | Išmanus LCD ekranas |
| Saugos ypatybės | Over-heat, Over-voltage, Over-current, Short-circuit protection, Defective battery detection |
| Matmenys | 5.83 x 4.88 x 1.85 colio |
| Svoris | 7.8 uncijos |
| UPC | 742354357019 |
10. Garantija ir palaikymas
The Dlyfull Smart Battery Charger UT1 comes with a worry-free 18 mėnesių garantija from the date of purchase. If you encounter any issues or have questions regarding your product, please contact Dlyfull customer service for assistance. Please refer to the product packaging or the official Dlyfull websvetainė, kurioje pateikiama naujausia kontaktinė informacija.