KING KB ECO2S+ 5KW 240V Electronic Garage Heater Instruction Manual

1. Įvadas

The KING KB ECO2S+ series unit heater provides efficient and user-friendly heating for various spaces. This model, KB2405-1-ECO2S-PLUS, features a 5KW / 240V power output, 2-stage heating, and an integrated electronic thermostat with a remote control and remote temperature sensor for optimal comfort and energy savings. It is designed for use as primary or supplemental heat sources in warehouses, stores, or large garages.

Pagrindinės funkcijos:

• Smart ECO2S+ Energy-Saving Design
• 2-Stage Šildymas: automatiškai naudoja mažiausią galiątage needed for heating.
• Includes ECO2S+ Remote Temperature Sensor for precise temperature monitoring.
• Built-In Provision for Optional 24V Remote Thermostat, compatible with NEST and other 24V Wi-Fi thermostats.
• Integrated fan-only and timer modes.
• Spiral steel elements and high CFM for even air distribution and prolonged heater life.
• Universal wall/ceiling bracket for simple installation.

2. Svarbi saugos informacija

Read all instructions before installing or using this heater. Failure to follow these instructions may result in electric shock, fire, property damage, or personal injury.

• Elektros sauga: Installation must be performed by a qualified electrician in accordance with all applicable local, state, and national electrical codes. Ensure the power supply is disconnected before any service or installation.
• Montavimas: Securely mount the heater using the provided universal bracket to a structural support capable of holding the unit's weight. Maintain proper clearances from combustible materials as specified in the installation section.
• Veikimas: Do not operate the heater with the grill removed. Do not block air inlets or outlets. Keep flammable materials away from the heater.
• Priežiūra: Prieš valydami ar atlikdami bet kokią techninę priežiūrą, atjunkite maitinimą.

3. Pakuotės turinys

Atidarę pakuotę, patikrinkite, ar visos prekės yra pakuotėje ir nepažeistos:

• KING KB ECO2S+ Unit Heater (5KW / 240V)
• Universalus sieninis / lubinis tvirtinimo laikiklis
• Nuotolinio valdymo pultas
• ECO2S+ Remote Temperature Sensor
• Heavy-Duty Pigtail (for electrical connection)
• Installation Hardware (lag bolts, nuts, grommet)
• Vartotojo vadovas

This image displays the main heater unit, a black remote control, a white remote temperature sensor, and a grey universal mounting bracket, all included in the product package.

4. Montavimas

4.1 Šildytuvo montavimas

The universal mounting bracket allows for both wall and ceiling installation. Ensure the mounting surface is structurally sound to support the heater's weight (approximately 40 lbs). Use appropriate lag bolts or expansion bolts provided in the hardware pack.

1. Attach the universal bracket to the desired wall or ceiling location using appropriate fasteners.
2. Align the heater unit with the bracket and secure it using the large knobs on the sides, allowing for angle adjustment.
3. Adjust the heater angle to direct airflow as needed. The bracket offers four adjustable positions.

This image shows the back of the grey heater unit with a protective grill covering the fan. Mounting holes are visible on the sides for attaching the universal bracket.

4.2 Elektros laidai

This heater requires a 240V dedicated circuit. Installation must be performed by a licensed electrician. The 5KW model typically requires a 40-amp breaker and 4-8 AWG copper wire. Ensure all local electrical codes are followed.

1. Atjunkite maitinimą: Turn off power at the main circuit breaker before beginning any wiring.
2. Prieigos laidų skyrius: Locate and remove the single Phillips screw on the side panel to open the wiring compartment.
3. Remove Knockout: Select an appropriate knockout on the side of the heater for your wiring. Use pliers to remove the knockout.
4. Install Strain Relief: Insert the provided grommet with integral strain relief into the knockout hole.
5. Prijunkite laidus:
   • Connect the black wire to the L1 terminal.
   • Connect the red wire to the L2 terminal.
   • Connect the green (ground) wire to the grounding screw.
   Ensure all wires are securely tightened and that no insulation is under the terminals.
6. Saugus laidas: Tighten the strain relief to prevent the wire from pulling out and to protect the wiring from damage.
7. Uždaryti skyrių: Reattach the access panel with the Phillips screw.
8. Atkurti maitinimą: Turn on power at the main circuit breaker.

This image shows the internal wiring compartment of the heater with various colored wires connected to terminals (L1, L2, and ground) and a circuit board. A label indicates "Red Wire L2" and "Black Wire L1" for 240V, 4-8AWG connections.

4.3 External Thermostat Switch

On the back of the heater, there is a toggle switch to select between the built-in thermostat (setting I) and an external thermostat (setting II). For most applications using the integrated controls, ensure the switch is set to 'I'. If connecting to an external 24V thermostat (e.g., Nest), set the switch to 'II' and ensure proper wiring by a licensed electrician.

5. Naudojimo instrukcijos

5.1 Pradinis įjungimas

Upon initial power-up, the unit will beep, and the display will show the current room temperature. This indicates correct voltage ir maitinimo šaltinis.

5.2 Valdymo skydelis ir nuotolinio valdymo pultas

The heater can be operated via the integrated control panel or the included remote control. The remote control offers convenient access to all functions from a distance.

This image shows the front of the grey heater unit with horizontal louvers and a digital control panel at the bottom. The control panel has buttons for Power, Mode, Start/Stop, and Up/Down arrows, along with a digital temperature display.

5.3 Darbo režimai

Paspauskite mygtuką „Režimas“, kad perjungtumėte galimus veikimo režimus:

• Žemas karštis: Užtikrina mažesnę šilumos išeigą.
• Ekologinis režimas: Automatiškai reguliuoja vandenįtage to the lowest level needed to maintain the set temperature, optimizing energy efficiency.
• Tik ventiliatorius: Circulates air without heating, useful for summer or general ventilation.
• Didelis karštis: Užtikrina maksimalią šilumos išeigą.

5.4 Temperatūros nustatymas

Use the Up/Down arrow buttons on the control panel or remote to set your desired temperature. The heater will maintain this temperature automatically.

5.5 Laikmačio funkcija

The timer mode allows you to set the heater to run for a predetermined length of time, after which it will automatically shut off. This feature helps conserve energy and provides convenience.

6. Priežiūra

Reguliarus aptarnavimas užtikrina optimalų šildytuvo veikimą ir ilgaamžiškumą. Prieš atlikdami bet kokią techninę priežiūrą, visada atjunkite maitinimą.

• Valymas: Reguliariai valykite šildytuvo išorę minkšta, d šluosteamp cloth. Ensure the air inlets and outlets are free from dust and debris. Do not use abrasive cleaners or solvents.
• Patikrinimai: Annually inspect electrical connections for tightness and signs of wear. Check the mounting bracket for security.
• Ventiliatorius: Ensure the fan operates smoothly and is free from obstructions.

7. Problemų sprendimas

Jei jūsų šildytuvas neveikia tinkamai, žr. šias dažniausiai pasitaikančias problemas ir sprendimus:

8. Specifikacijos

• Prekinis ženklas: KARALIUS
• Modelis: KB2405-1-ECO2S-PLUS
• Galia: 5 kW
• ttage: 240 V
• Amppakilimas: 20.8 Amps
• Greičių skaičius: 2 (žemas, aukštas)
• Kuro tipas: Elektrinis
• Ypatingos savybės: Energy Efficient, Remote Control, Remote Temperature Sensor, 2-Stage Šildymas
• Spalva: Juoda
• Formos faktorius: kabinetas
• Naudojimas viduje / lauke: Vidinis
• Montavimo tipas: Wall Mount (Universal bracket included)
• Gaminio matmenys: 16.5 x 15 x 13.5 colio
• Prekės svoris: 40 svaro
• UPC: 093319332399
• Pirmas prieinamas: 29 m. rugsėjo 2020 d

This chart provides guidance on selecting the appropriate heater wattage based on garage size (1-car to 4-car garages), square footage, BTU, CFM, and amperage. The 5KW model is suitable for 1-car garages up to 450 sq. ft.

9. Garantija ir palaikymas

For specific warranty details, please refer to the documentation included with your product or contact KING customer support. General product protection plans may be available for purchase separately.

• Grąžinimai: Šiam produktui paprastai taikoma 30 dienų lengva grąžinimo politika.
• Apsaugos planai: Optional 4-Year Protection Plans and Complete Protect monthly plans may be available for extended coverage.
• Klientų aptarnavimas: For technical assistance or service inquiries, please visit the KING store on Amazon or refer to the contact information provided in your product packaging.

Visit the official KING Store for more information: KING Store