1. Įvadas
The COMFAST CF-WR301S is a versatile wireless networking device designed to enhance and extend your existing Wi-Fi coverage. It supports multiple operating modes, including Repeater, Router, and Access Point (AP) modes, providing flexible solutions for various network requirements. This manual provides detailed instructions for setting up, operating, and maintaining your device to ensure optimal performance.

Figure 1: The COMFAST CF-WR301S device with its two external antennas.
2. Saugos informacija
- Įsitikinkite, kad įrenginys įjungtas į maitinimo lizdą su tinkamu garsumutage.
- Saugokite įrenginį nuo vandens, drėgmės ar ekstremalių temperatūrų.
- Nestatykite prietaiso šalia šilumos šaltinių arba tiesioginiuose saulės spinduliuose.
- Užtikrinkite tinkamą vėdinimą aplink įrenginį, kad jis neperkaistų.
- Nebandykite patys atidaryti ar taisyti įrenginio. Dėl remonto kreipkitės į kvalifikuotus specialistus.
3. Produktas baigtasview
The COMFAST CF-WR301S features a compact design with dual external antennas for improved signal reception and transmission. It includes LED indicators for power, Wi-Fi status, and signal strength, providing visual feedback on its operational status.

Figure 2: The COMFAST CF-WR301S highlighting its compact design and key features like signal penetration, 300Mbps speed, 80m coverage, and efficient heat dissipation.
3.1 Fizinės savybės
- Antenos: Two external 3dBi antennas for enhanced wireless coverage.
- LED indikatoriai: Power (Green), Wi-Fi (Green/Red for signal strength).
- WPS/RST mygtukas: Used for WPS pairing or resetting the device to factory defaults (press for 5 seconds).
- LAN prievadas: For wired connections in Access Point or Router mode.

Figure 3: Illustration showing the COMFAST CF-WR301S with its dual antennas, depicting how it enhances WiFi signal penetration through walls for wider coverage.
4. Sąranka
This section guides you through the initial setup of your COMFAST CF-WR301S. The device supports Repeater Mode and Access Point Mode.
4.1 Pradinis prisijungimas
- Maitinimas: Plug the CF-WR301S into a power outlet. Wait for the Power LED to turn green.
- Prisijunkite prie įrenginio: On your computer or smartphone, search for available Wi-Fi networks. Connect to the network named CF-WR301S_xxxx (where xxxx are the last four digits of the device's MAC address). No password is required for the initial connection.
- Prieiga Web Sąsaja: Atidarykite a web naršyklę ir įveskite 192.168.10.1 in the address bar. This will open the device's configuration page.

Figure 4: The COMFAST CF-WR301S plugged into a power strip, demonstrating its compact 'mini size' that does not obstruct adjacent outlets.
4.2 Kartotuvo režimo sąranka
Repeater mode extends the coverage of an existing Wi-Fi network.
- Priėjus prie web interface (192.168.10.1), select Kartotuvo režimas.
- The device will scan for available Wi-Fi networks. Select the network you wish to extend from the list.
- Įveskite pasirinkto tinklo „Wi-Fi“ slaptažodį.
- You can choose to keep the same SSID (network name) or create a new one for the extended network.
- Spustelėkite Taikyti or Išsaugoti. The device will restart. Once the Wi-Fi indicator turns green, the setup is complete.
4.3 Prieigos taško (AP) režimo sąranka
AP režimas konvertuoja laidinį interneto ryšį į belaidį tinklą.
- Connect an Ethernet cable from your router or modem to the LAN port of the CF-WR301S.
- Prisijunkite prie web interface (192.168.10.1) and select AP režimas.
- Konfigūruokite naują „Wi-Fi“ tinklo pavadinimą (SSID) ir slaptažodį.
- Spustelėkite Taikyti or Išsaugoti. The device will restart. Once the Wi-Fi indicator turns green, the setup is complete.

Figure 5: A three-step visual guide demonstrating the setup process for the COMFAST CF-WR301S using a smartphone interface, including connecting to the default SSID, accessing the web GUI, and selecting the WiFi signal to extend.
5. Veikimo režimai
5.1 Kartotuvo režimas
In Repeater Mode, the CF-WR301S wirelessly connects to your existing router's Wi-Fi network and re-broadcasts it, effectively extending the signal to areas with poor coverage. This mode is ideal for eliminating Wi-Fi dead zones.
5.2 Prieigos taško (AP) režimas
In AP Mode, the CF-WR301S connects to your wired network via an Ethernet cable and creates a new wireless network. This is useful for adding Wi-Fi capability to a wired-only network or for creating a separate Wi-Fi network.
6. Priežiūra
- Valymas: Įrenginiui valyti naudokite minkštą, sausą šluostę. Nenaudokite skystų valiklių ar aerozolių.
- Firmware atnaujinimai: Periodiškai tikrinkite COMFAST oficialų websvetainę, kurioje rasite programinės įrangos atnaujinimus, kad būtų užtikrintas optimalus našumas ir saugumas.
- Vieta: For best performance, place the device in a central location, away from obstructions and sources of interference.

Figure 6: The COMFAST CF-WR301S with a magnified view of its side ventilation slots, illustrating its design for efficient heat dissipation and stable operation.
7. Problemų sprendimas
- Negaliu prieiti web interface (192.168.10.1): Ensure your device is connected to the CF-WR301S's default Wi-Fi network. Try clearing your browser's cache or using a different browser.
- No internet connection after setup: Verify that the main router has an active internet connection. In Repeater Mode, ensure you entered the correct password for the host Wi-Fi network. In AP Mode, confirm the Ethernet cable is securely connected and providing internet.
- Weak signal or slow speed: Relocate the CF-WR301S closer to your main router. Ensure there are no major obstructions (thick walls, metal objects) between the devices.
- Įrenginio nustatymas iš naujo: If you encounter persistent issues, press and hold the WPS/RST button for approximately 5 seconds until the LEDs flash. This will restore the device to factory default settings.
8. Specifikacijos

Figure 7: Detailed technical specifications for the COMFAST CF-WR301S.
| Funkcija | Aprašymas |
|---|---|
| Modelio pavadinimas | CF-WR301S |
| Dažnis | 2.412–2.472 GHz |
| bevielio ryšio standartas | Support IEEE802.11b/g/n standard |
| Belaidžio ryšio greitis | 300 Mbps |
| Mygtukas | 1*WPS/RST Button (Press 5 seconds for RST) |
| Rodiklis | Power Indicator (Green Color), WiFi Indicator (Green: Good Signal; Red: Weak Signal) |
| Šifravimas | WPA-PSK/WPA2-PSK; WPA/WPA2 |
| Darbo režimas | Kartotuvo režimas, AP režimas |
| Dydis | 156*78*43mm (Measured manually with slight deviation) |
| Darbinė temperatūra | -10 C ~ 40 C |
| Laikymo temperatūra | -40 C ~ 70 C |
| Darbinė drėgmė | 10 % ~ 90 % RH Nekondensuojantis |
| Sandėliavimas Drėgmė | 5 % ~ 90 % RH Nekondensuojantis |
9. Garantija ir palaikymas
Dėl garantijos informacijos ir techninės pagalbos žr. kartu su pirkiniu pateiktus dokumentus arba apsilankykite oficialioje COMFAST svetainėje. website. If you encounter issues not covered in this manual, please contact COMFAST customer support for assistance.

Figure 8: Image displaying the contents of the COMFAST CF-WR301S package, including the CF-WR301S device and its quick installation guide.





