Vadovai+

Transformers WFC-E26

Transformers Generations War for Cybertron Earthrise WFC-E26 Decepticon Thrust Instruction Manual

1. Produktas baigtasview

This manual provides instructions for the Transformers Generations War for Cybertron Earthrise WFC-E26 Voyager Class Decepticon Thrust action figure. Decepticon Thrust is a 7-inch scale figure capable of converting between robot mode and jet mode in 23 steps. The figure includes two blaster accessories that can be mounted in both modes.

Warning: Choking Hazard - Small parts. Not for children under 3 years. Recommended for ages 8 and up.

Decepticon Thrust figure in robot mode, standing with blasters attached to its arms.

Image 1.1: Decepticon Thrust in Robot Mode with Blasters

Decepticon Thrust figure in jet mode, viewed from above, showing its red and black design with blasters attached to the wings.

Image 1.2: Decepticon Thrust in Jet Mode

2. Sąranka ir surinkimas

2.1 Išpakavimas

  1. Carefully remove the figure and its accessories from the packaging.
  2. Retain the packaging for future reference or storage.
The Transformers Generations War for Cybertron Earthrise WFC-E26 Decepticon Thrust figure in its retail packaging.

Image 2.1: Packaged Decepticon Thrust Figure

2.2 Priedų tvirtinimas

The Decepticon Thrust figure comes with two blaster accessories. These can be attached in various configurations depending on the figure's mode.

  • In Robot Mode: The blasters can be mounted on the figure's hands or on designated ports on its back or arms.
  • In Jet Mode: The blasters can be mounted on the wings of the jet.
Close-up of the Decepticon Thrust figure's arm with a blaster accessory attached, showing the connection point.

Image 2.2: Blaster Accessory Attachment Point

3. Operating the Figure: Transformation

Decepticon Thrust transforms between robot mode and jet mode in 23 distinct steps. Refer to the detailed visual instructions provided on the product packaging or the included instruction sheet for precise guidance.

3.1 Transformation from Robot to Jet Mode

  1. Pradėkite nuo figūrėlės roboto režimu.
  2. Carefully manipulate the limbs, torso, and wing sections according to the numbered steps in the visual guide.
  3. Ensure all parts are securely tabbed or locked into place to form the complete jet mode.

3.2 Transformation from Jet to Robot Mode

  1. Begin with the figure in jet mode.
  2. Reverse the transformation steps, carefully unfolding and repositioning parts to achieve the robot mode.
  3. Ensure all joints are correctly aligned and the figure stands stably.
Back of the product box showing diagrams for transforming Decepticon Thrust between robot and jet modes in 23 steps.

Image 3.1: Transformation Guide (Refer to packaging for full details)

4. Priežiūra

4.1 Valymas

  • To clean the figure, gently wipe with a dry, soft cloth.
  • Įsisenėjusiam purvui, šiek tiekamp galima naudoti šluostę, po kurios nedelsiant reikia išdžiovinti.
  • Avoid using harsh chemicals, abrasive cleaners, or excessive water, as these can damage the paint or plastic.

4.2 Saugykla

  • Figūrėlę laikykite vėsioje, sausoje vietoje, apsaugotoje nuo tiesioginių saulės spindulių ir ekstremalių temperatūrų.
  • Keep small accessories in a secure container to prevent loss.

5. Problemų sprendimas

5.1 Stiff Joints

If joints feel stiff, gently work them back and forth. Avoid forcing movement, as this can cause breakage. Applying a very small amount of silicone shock oil (specifically designed for plastic) to the joint pivot may help, but use sparingly and test in an inconspicuous area first.

5.2 Difficulty Transforming

If you encounter difficulty during transformation, refer to the visual instruction guide. Ensure each step is followed precisely. Sometimes, parts need to be aligned in a specific order for subsequent steps to proceed smoothly. Do not apply excessive force.

5.3 Palaidos dalys

If a part feels loose, check if it is fully tabbed or connected. For persistently loose joints, a very thin layer of clear nail polish or a specialized joint tightening fluid can be applied to the ball joint or peg, allowed to dry, and then reassembled. This should be done with caution.

6. Specifikacijos

  • Modelio numeris: WFC-E26 (Item Model Number: E78445L0)
  • Figure Scale: 7 colių
  • Gaminio matmenys: 3.19 x 6.75 x 9.5 colio
  • Prekės svoris: 9.6 uncijos
  • Gamintojas: Hasbro
  • Rekomenduojamas amžius: 8 metai ir daugiau
  • ASIN: B08PS4ZFL1

7. Informacija apie garantiją

This product is manufactured by Hasbro. For specific warranty details, please refer to the information provided on the product packaging or contact Hasbro customer service directly. Warranty terms typically cover manufacturing defects under normal use.

8. Parama

For further assistance, questions, or to report any issues with your Transformers Generations War for Cybertron Earthrise WFC-E26 Decepticon Thrust figure, please contact the manufacturer, Hasbro, through their official customer support channels. Contact information can usually be found on the product packaging or their official websvetainę.