APEXFORGE M6 rotacinių įrankių rinkinio naudotojo vadovas

1. Įvadas

This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your APEXFORGE M6 Rotary Tool Kit. Please read these instructions thoroughly before first use and retain for future reference.

2. Saugos instrukcijos

Naudodami elektrinius įrankius, visada teikite pirmenybę saugai. Nesilaikant šių nurodymų, galite susižaloti arba sugadinti įrankį.

• Dėvėkite tinkamas asmenines apsaugos priemones (AAP), įskaitant apsauginius akinius, pirštines ir klausos apsaugos priemones.
• Įsitikinkite, kad ruošinys tvirtai pritvirtintasampprieš pradedant bet kokią operaciją.
• Laikykite darbo vietą švarią ir gerai apšviestą.
• Nenaudokite įrankio d padėtyje.amp arba drėgnomis sąlygomis.
• Unplug the tool before changing accessories or performing maintenance.
• Flexible Shaft Warning: During use, avoid bending the flexible shaft excessively. The working angle of the flexible shaft should not be less than or equal to 45 degrees. Exceeding this angle can cause the flexible shaft to overheat and sustain damage.
• Take regular breaks during prolonged use to prevent overheating of the tool and to maintain user focus.

3. Pakuotės turinys

Your APEXFORGE M6 Rotary Tool Kit includes the following items:

• APEXFORGE M6 Rotary Tool
• MultiPro Keyless Chuck
• Lankstus velenas
• Shield Attachment
• Detailer Grip Attachment
• Cutting Guide Attachment
• 172 Assorted Accessories (for sanding, polishing, cutting, engraving, drilling, deburring, cleaning, carving)
• Dėklas nešiojimui

Išpakavimo vaizdo įrašas

Video 3.1: An unboxing video demonstrating the contents of the APEXFORGE Rotary Tool Kit M6.

4. Produkto ypatybės

• Galingas variklis: Equipped with a 135W motor for various tasks.
• Kintamo greičio valdymas: Six-speed adjustment ranging from 10,000 to 35,000 RPM for flexible speed control.
• Keyless 3-Jaw Chuck: Allows for quick and easy accessory changes without a wrench, accommodating shank sizes from 1/64" to 1/8".
• Ergonomiškas dizainas: Compact and streamlined body for comfortable long-duration use.
• Platus priedų pasirinkimas: 172 pieces suitable for sanding, polishing, cutting, shaping, drilling, deburring, cleaning, and carving.
• Universalūs priedai: Includes a Flexible Shaft, Shield, Detailer Grip, and Cutting Guide for enhanced precision and safety.
• Suderinamumas: Accessories are compatible with most rotary tools from major brands.

5. Sąranka

5.1 Lankstaus veleno pritvirtinimas

1. Unscrew the collet nut and remove the collet from the rotary tool.
2. Insert the flexible shaft's drive end into the rotary tool's collet opening.
3. Tighten the flexible shaft's coupling nut onto the rotary tool.
4. To insert an accessory into the flexible shaft's handpiece, press the shaft lock button and loosen the collet nut. Insert the accessory, then tighten the collet nut.

5.2 Attaching the Detailer Grip

1. Įsitikinkite, kad sukamasis įrankis yra atjungtas nuo elektros tinklo.
2. Align the detailer grip with the front of the rotary tool.
3. Slide the grip onto the tool until it clicks securely into place.

5.3 Pjovimo kreiptuvo pritvirtinimas

1. Įsitikinkite, kad sukamasis įrankis yra atjungtas nuo elektros tinklo.
2. Thread the cutting guide onto the front of the rotary tool.
3. Adjust the depth as needed and secure it.

5.4 Attaching the Shield

1. Įsitikinkite, kad sukamasis įrankis yra atjungtas nuo elektros tinklo.
2. Thread the shield onto the front of the rotary tool.
3. Adjust its position for optimal protection.

Flexible Shaft Installation Video

Video 5.1: A demonstration on how to install the flexible shaft and detailer's grip on the APEXFORGE M6 rotary tool.

6. Naudojimo instrukcijos

6.1 Įjungimas ir greičio reguliavimas

1. Plug the rotary tool into a suitable power outlet (120 Volts AC).
2. Pasukite maitinimo jungiklį į padėtį „ĮJUNGTA“.
3. Use the variable speed dial to select the desired RPM, ranging from 10,000 to 35,000 RPM. Start with a lower speed and gradually increase as needed for the task and material.

6.2 Bendrieji naudojimo patarimai

• Šlifavimas: Use appropriate sanding bands or discs. Apply light, even pressure and move the tool consistently to avoid gouging the material.
• Pjovimas: Attach a cutting disc and the shield for protection. Allow the disc to reach full speed before contacting the material. Use a steady hand and avoid forcing the cut.
• Engraving/Carving: For intricate work, utilize the flexible shaft or detailer grip. Select a suitable engraving bit and practice on scrap material first.
• Gręžimas: Insert the correct drill bit. Ensure the workpiece is stable. Apply steady pressure and allow the tool to do the work.
• Poliravimas / valymas: Use polishing wheels or wire brushes with appropriate compounds. Move the tool gently over the surface to achieve desired results.

7. Priežiūra

• Valymas: After each use, unplug the tool and clean it with a soft, dry cloth. Remove any dust or debris from the ventilation slots to ensure proper cooling.
• Priedų saugykla: Store all accessories in the provided carrying case to keep them organized and protected.
• Lankstaus veleno priežiūra: Inspect the flexible shaft regularly for any signs of wear or damage. Ensure it is not kinked or bent sharply during storage or use.
• Variklio šepetėliai: The motor uses brushes. If the tool experiences reduced power or intermittent operation, the brushes may need inspection or replacement. Refer to the detailed instructions in the full user manual for brush replacement.

8. Problemų sprendimas

If you encounter issues with your APEXFORGE M6 Rotary Tool, please refer to the following common troubleshooting steps:

• Įrankis neįsijungia: Check the power connection and ensure the outlet is functional. Verify the power switch is in the 'ON' position.
• Sumažinta galia arba pertraukiamasis veikimas: This may indicate worn motor brushes. Consult the full user manual for instructions on inspecting and replacing motor brushes.
• Pernelyg didelė vibracija: Ensure the accessory is correctly installed and tightened in the chuck. Check if the accessory itself is damaged or bent.
• Flexible shaft overheating: Ensure the flexible shaft is not bent at an angle less than 45 degrees during operation. Allow the tool to rest if it becomes hot.

For further assistance, please contact APEXFORGE customer support.

9. Specifikacijos

10. Garantija ir palaikymas

For warranty information or technical support, please refer to the documentation included with your product or visit the official APEXFORGE website. Contact details for customer service are typically provided within the product packaging or on the manufacturer's websvetainę.