1. Produktas baigtasview
The AK Interactive Fine Metal Primer is a high-quality spray product with a grey tone, specifically formulated for priming metal parts. It offers high opacity once dry and can be applied directly over metal surfaces. This primer is ultra-resistant and provides excellent adherence, making it ideal for model building and hobby applications.
Image: AK Interactive Fine Metal Primer Spray Can (150ml). The can features the AK Interactive logo, 'FINE METAL PRIMER' text, and the product code 'AK1016'.
2. Saugos priemonės
Always prioritize safety when working with aerosol products. Read and understand all warnings on the product label before use.
- Vėdinimas: Use in a well-ventilated area. Avoid breathing vapors. If working indoors, ensure adequate airflow or use a respirator.
- Degumas: This product is flammable. Keep away from heat, sparks, open flames, and hot surfaces. Do not smoke during application.
- Akių apsauga: Wear appropriate eye protection (e.g., safety glasses or goggles) to prevent accidental spray contact.
- Odos apsauga: Wear gloves to prevent prolonged or repeated skin contact. Wash hands thoroughly after handling.
- Saugykla: Store in a cool, dry place, away from direct sunlight and extreme temperatures. Keep out of reach of children and pets.
- Šalinimas: Dispose of empty cans and any unused product according to local regulations. Do not puncture or incinerate cans, even when empty.
3. Paruošimas
Proper preparation ensures optimal adhesion and finish.
- Švarus paviršius: Thoroughly clean and degrease the metal parts to be painted. Any dirt, oil, or residue can compromise primer adhesion.
- Darbo sritis: Ensure your work area is clean, well-lit, and well-ventilated. Protect surrounding surfaces from overspray using drop cloths or newspaper.
- Temperatūra: Apply in a moderate temperature environment, ideally between 15°C and 25°C (59°F and 77°F), and avoid high humidity.
4. Taikymo instrukcijos
4.1. Prieš naudojimą
- Gerai suplakite: Before each use, shake the spray can vigorously for at least one minute after the mixing ball begins to rattle. This ensures a good mixture of the paint components.
4.2. Taikymas
- Padėties nustatymas: Hold the can in a vertical position during application.
- Atstumas: Maintain a distance of approximately 25 cm (10 inches) from the surface you are priming.
- Coats: Apply the primer in fast, thin, and even coats. Avoid applying a thick single coat, as this can lead to drips or an uneven finish.
- Džiūvimo laikas: Allow approximately 5 minutes of drying time between layers. This allows the previous coat to flash off and prevents solvent trapping.
- Kietėjimas: The synthetic lacquer cures in a short period of time, providing a durable base for subsequent paint layers. Full cure time is approximately 5 minutes per layer.
5. Priežiūra po naudojimo
- Skaidrus antgalis: To prevent the diffuser from becoming obstructed, turn the can upside down immediately after painting. Hold the spray nozzle down for a few seconds until only clear gas emerges. This clears any remaining paint from the nozzle.
- Saugykla: Store the can upright in a cool, dry, and well-ventilated area, away from direct sunlight and freezing temperatures. Ensure the cap is securely placed.
6. Problemų sprendimas
6.1. Clogged Nozzle
- Simptomai: Paint does not spray, or sprays unevenly.
- Sprendimas: Ensure you have followed the post-application care step (clearing the nozzle by inverting the can and spraying). If the nozzle is still clogged, you may attempt to carefully clean it with a thin wire or replace the nozzle if a spare is available.
7. Techninės specifikacijos
| Funkcija | Detalė |
|---|---|
| Prekės ženklas | AK Interaktyvus |
| Modelio numeris | AK1016 |
| Spalva | Pilka |
| Apdailos tipas | Matinis |
| Prekės tūris | 150 mililitrų |
| Vienetų skaičius | 5.07 skysčių uncijų |
| Dažų tipas | Purškimas |
| Specifiniai naudojimo būdai | Interior/Exterior (for models) |
| Paviršiaus rekomendacija | Metalas |
| Prekės forma | Aerozolis |
| Visas gijimo laikas | 5 Minutes (per layer) |
| Atsparumo vandeniui lygis | Atsparus vandeniui |
| UPC | 689358638525 |
8. Informacija apie garantiją
AK Interactive products are manufactured to high standards. For specific warranty details regarding this product, please refer to the product packaging or visit the official AK Interactive websvetainėje. Išsaugokite pirkimo įrodymą, jei prireiktų pateikti garantinį ieškinį.
9. Pagalba klientams
For further assistance, technical questions, or support regarding the AK Interactive Fine Metal Primer, please contact AK Interactive customer service through their official website or authorized distributors. Provide the product model number (AK1016) when seeking support.
