Įvadas
This manual provides essential information for the proper installation, operation, and maintenance of your Behringer WING-DANTE expansion card. The WING-DANTE card enables 64x64 channel Audinate Dante AoIP networking for your Behringer WING digital mixing console, facilitating high-quality, low-latency audio transmission over standard IP networks.
Prieš naudodami gaminį, atidžiai perskaitykite šį vadovą, kad užtikrintumėte saugų ir efektyvų veikimą.
Svarbios saugos instrukcijos
- Galia: Ensure the WING console is powered off and disconnected from the mains supply before installing or removing the WING-DANTE card.
- Montavimas: Only qualified personnel should install this expansion card. Refer to the WING console's manual for specific instructions on installing expansion cards.
- Aplinka: Do not expose the device to rain, moisture, dripping, or splashing. Do not place objects filled with liquids on the device.
- Vėdinimas: Ensure proper ventilation around the WING console to prevent overheating.
- Valymas: Valykite tik sausa šluoste. Nenaudokite skystų valiklių ar aerozolių.
- Aptarnavimas: Visus techninės priežiūros darbus patikėkite kvalifikuotiems techninės priežiūros darbuotojams. Nebandykite patys atlikti šio gaminio techninės priežiūros.
Pakuotės turinys
Išpakuodami patikrinkite, ar yra visi komponentai ir ar jie geros būklės:
- Behringer WING-DANTE Expansion Card
- Greito paleidimo vadovas (jei taikoma, neįtrauktas į šį vadovą)
Jei kokių nors elementų trūksta arba jie sugadinti, nedelsdami kreipkitės į pardavėją.
Produktas baigtasview
The WING-DANTE card provides a powerful interface for integrating your WING console into a Dante Audio over IP network. It features dual Ethernet ports for redundant Dante networking and status indicators for network activity.
1 paveikslas: Priekyje view of the Behringer WING-DANTE expansion card. Shows two Ethernet ports labeled 'PRIMARY' and 'SECONDARY', each with 'ACT/LINK 1G' status LEDs. The card is black with white text.
2 paveikslas: Kampuotas view of the Behringer WING-DANTE expansion card, highlighting the side profile and the green tab for insertion/removal. The two Ethernet ports and status LEDs are visible.
Pagrindinės funkcijos:
- 64-channel 48 kHz, bi-directional audio interface for Dante IP networks.
- Low-latency 24-bit signal transmission with sample-accurate synchronization.
- Interfacing with standard 100 Mbit/s or Gigabit network infrastructure with DSCP-based QoS.
- Mišrus sample and bit rates can coexist on the same Dante network.
- WING remote control possible on the same network, using the integrated Ethernet switch.
Sąranka ir diegimas
- Power Off WING Console: Before beginning, ensure your Behringer WING digital mixing console is completely powered off and disconnected from the main power supply.
- Raskite išplėtimo lizdą: Refer to your WING console's user manual to identify the expansion card slot.
- Insert WING-DANTE Card: Carefully align the WING-DANTE card with the expansion slot. Gently push the card into the slot until it is firmly seated. Do not force the card.
- Saugi kortelė: If your WING console has securing mechanisms for expansion cards (e.g., screws or latches), ensure the WING-DANTE card is properly secured.
- Prijunkite tinklo laidus: Connect standard Ethernet cables from your Dante network to the 'PRIMARY' and 'SECONDARY' ports on the WING-DANTE card. For redundant operation, connect both. For non-redundant, connect to 'PRIMARY'.
- Power On WING Console: Reconnect the WING console to the main power supply and power it on. The console should detect the new WING-DANTE card.
- Programinės įrangos atnaujinimas (jei reikia): Patikrinkite „Behringer“ website for any firmware updates required for the WING console or the WING-DANTE card to ensure optimal compatibility and performance.
For detailed instructions on configuring Dante networks, refer to the Audinate Dante documentation and software (Dante Controller).
Operacija
Dante Network Configuration:
The WING-DANTE card integrates seamlessly with the Dante ecosystem. Configuration is primarily managed using Audinate's „Dante“ valdiklis software, available for Windows and macOS.
- Install Dante Controller: Download and install the latest version of Dante Controller from the Audinate websvetainė (Www.audinate.com).
- Tinklo prisijungimas: Ensure your computer running Dante Controller is connected to the same network as your WING-DANTE card.
- Įrenginio atpažinimas: Open Dante Controller. Your WING console with the WING-DANTE card should appear as a recognized Dante device.
- Garso maršrutizavimas: Use Dante Controller to establish audio routes between the WING-DANTE card (representing your WING console's inputs/outputs) and other Dante-enabled devices on your network.
- Laikrodžio sinchronizavimas: Dante automatically manages clock synchronization. Ensure one device is designated as the master clock, or allow Dante to automatically select one.
- IP adresas: By default, Dante devices use Automatic Private IP Addressing (APIPA). For larger or more complex networks, you may configure static IP addresses or use DHCP.
Būklės rodikliai:
The WING-DANTE card features LEDs next to each Ethernet port:
- ACT (Activity) LED: Flashes to indicate network data activity.
- LINK 1G (Link/Speed) LED:
- Žalia (vientisa): Indicates a 1 Gigabit Ethernet link.
- Oranžinė (kieta): Indicates a 100 Megabit Ethernet link.
- Išjungta: No network link detected.
Priežiūra
- Valymas: Use a soft, dry cloth to clean the exterior of the WING-DANTE card. Do not use abrasive cleaners, solvents, or waxes.
- Firmware atnaujinimai: Reguliariai tikrinkite „Behringer“ website for new firmware versions for both the WING console and the WING-DANTE card. Keeping firmware updated ensures optimal performance, compatibility, and access to new features.
- Aplinkos sąlygos: Operate and store the card within recommended temperature and humidity ranges to prevent damage. Avoid extreme temperatures and high humidity.
Trikčių šalinimas
| Problema | Galima priežastis | Sprendimas |
|---|---|---|
| WING-DANTE card not recognized by WING console. | Card not fully seated; console firmware outdated. | Power off, reseat the card firmly. Check Behringer website for WING console firmware updates. |
| No network link (LINK 1G LED off). | Faulty Ethernet cable; network switch off/misconfigured; incorrect port. | Check Ethernet cable connections. Verify network switch is powered on and configured correctly. Try a different port or cable. |
| Dante Controller does not see the WING-DANTE card. | Computer not on same network; firewall blocking; IP address conflict. | Ensure computer is on the same subnet. Temporarily disable firewall. Check for IP address conflicts using network tools. |
| Audio dropouts or glitches. | Network congestion; incorrect clocking; high latency settings. | Ensure network is dedicated for Dante traffic. Verify clock master is correctly set in Dante Controller. Adjust Dante latency settings (increase if necessary). Use Gigabit switches. |
Specifikacijos
| Funkcija | Detalė |
|---|---|
| Modelis | WING-DANTE |
| Kanalai | 64x64 (bi-directional) |
| Sample Įvertinkite | 48 kHz |
| Bitų gylis | 24 bitų |
| Ryšys | Ethernet (Dante AoIP) |
| Tinklo suderinamumas | Standard 100 Mbit/s or Gigabit Ethernet |
| QoS palaikymas | DSCP pagrįstas QoS |
| Matmenys (A x P x G) | Apytiksliai 1.42 x 5.67 x 5.12 colio (36 x 144 x 130 mm) |
| Svoris | Maždaug 12.1 uncijos (343 g) |
| Suderinami įrenginiai | Behringer WING Digital Mixing Console |
3 paveikslas: Rear label of the WING-DANTE card showing model number, manufacturer, and regulatory compliance markings (FCC, CE, UKCA, EAC).
Garantija ir palaikymas
Dėl išsamios informacijos apie garantiją ir techninės pagalbos apsilankykite oficialioje „Behringer“ svetainėje websvetainėje arba susisiekite su vietiniu „Behringer“ platintoju.
„Behringer“ oficialus atstovas Websvetainė: www.behringer.com
Product registration is recommended to receive updates and support.
