1. Įvadas
Thank you for choosing Lepro RGB LED Strip Lights. This manual provides detailed instructions for the safe and efficient use of your new LED strip lights. These versatile lights offer a wide range of colors and modes, perfect for enhancing various indoor environments.
Figure 1: Lepro 40ft RGB LED Strip Lights in a living room setting.
2. Kas yra dėžutėje
Patikrinkite pakuotės turinį, kad įsitikintumėte, jog yra visi reikalingi daiktai:
- 1 x 39.4ft (12m) Non-Waterproof RGB LED Strip
- 1 x 44 klavišų IR nuotolinio valdymo pultas
- 1 x 24V Power Adapter (US Plug)
3. Saugos informacija
Read all safety instructions before installation and use. Keep this manual for future reference.
- Naudoti tik patalpose: This product is designed for indoor use and is not waterproof.
- Maitinimas: Use only the provided 24V power adapter. Using an incorrect power supply may damage the product and void the warranty.
- Montavimo paviršius: Įsitikinkite, kad klijavimo paviršius yra švarus, sausas ir lygus, kad klijai optimaliai veiktų.
- Juostos pjovimas: Only cut the LED strip at designated cut marks (every 3 LEDs). Cutting elsewhere will damage the strip.
- Venkite perkaitimo: Do not coil the LED strip tightly when powered on, as this can cause overheating.
- Vaikai ir augintiniai: Laikykite gaminį ir jo komponentus vaikams ir naminiams gyvūnams nepasiekiamoje vietoje.
4. Sąranka ir diegimas
Norėdami tinkamai įdiegti, atlikite šiuos veiksmus:
- Paruoškite paviršių: Clean the desired installation surface thoroughly to remove dust, oil, or moisture. A clean, dry surface ensures strong adhesion.
- Išmatuokite ir supjaustykite (jei reikia): Unroll the LED strip and measure the required length. If shortening is needed, cut the strip only at the designated cut marks, typically indicated by a copper line and a scissor icon, every 3 LEDs.
- Pritvirtinkite juostelę: Peel off the backing from the 3M adhesive tape on the back of the LED strip. Carefully press the strip onto the cleaned surface, ensuring firm contact along its entire length.
- Secure with Fixing Clips (Optional): For added security, especially on textured surfaces or corners, use the provided fixing clips. Secure them at regular intervals or critical points along the strip.
- Prijunkite maitinimą: Connect the LED strip to the IR receiver, and then connect the IR receiver to the 24V power adapter. Plug the power adapter into a standard electrical outlet.
- Aktyvuoti nuotolinį valdymą: Before first use, remove the plastic insulation tab from the battery compartment of the 44-key IR remote control.
Figure 2: Visual guide for LED strip installation steps.
Figure 3: Connection diagram and remote activation.
Figure 4: 3M Adhesive and Fixing Clips.
5. Naudojimo instrukcijos
Control your LED strip lights using the included 44-key IR remote control. Ensure the remote is pointed directly at the IR receiver for optimal response.
Figure 5: 44-Key IR Remote Control Layout.
Nuotolinio valdymo pulto funkcijos:
- Įjungta/Išjungta: Power button to turn the lights on or off.
- Ryškumo reguliavimas: Naudokite ↑ ir ↓ buttons to increase or decrease brightness.
- Spalvos pasirinkimas: Choose from 16 preset static colors, including Red, Green, Blue (RGB), and White.
- „Pasidaryk pats“ spalvos: 6 programmable DIY buttons allow you to save your favorite custom color mixes.
- Paspauskite a DIY mygtuką.
- Naudokite ↑ ir ↓ arrows next to R, G, B to adjust the intensity of each primary color.
- Paspauskite tą patį DIY button again to save your custom color.
- Režimo pasirinkimas: Select from 8 dynamic modes (e.g., Flash, Fade, Jump) to create different lighting effects.
- BLYKSTĖ: Jumps between colors.
- FADE3 / FADE7: Fades between 3 or 7 colors.
- JUMP3 / JUMP7: Jumps between 3 or 7 colors.
- AUTOMATINIS: Perjungia visus režimus.
- GREITAS / LĖTAS: Reguliuoja dinaminių režimų greitį.
Figure 6: Remote control in use for ambient lighting.
6. Priežiūra
Proper maintenance ensures the longevity of your LED strip lights.
- Valymas: Gently wipe the LED strip with a soft, dry cloth to remove dust. Do not use liquid cleaners or immerse the strip in water.
- Saugykla: Jei žibintus ilgesnį laiką sandėliuosite, įsitikinkite, kad jie yra švarūs, sausi ir laisvai suvynioti, kad nepažeistumėte.
- Venkite lenkimo: Do not bend the LED strip sharply, especially at the connection points, as this can damage the internal circuitry.
7. Problemų sprendimas
Jei kyla problemų, žr. toliau pateiktas dažniausiai pasitaikančias problemas ir sprendimus:
| Problema | Galima priežastis | Sprendimas |
|---|---|---|
| Šviesos neįsijungia. |
|
|
| Nuotolinio valdymo pultas nereaguoja. |
|
|
| Spalvos yra neteisingos arba nenuoseklios. |
|
|
8. Specifikacijos
| Funkcija | Detalė |
|---|---|
| Prekės ženklas | Lepro |
| Modelio numeris | PR410116-RGB-US |
| Šviesos šaltinio tipas | Šviesos diodas (5050 SMD) |
| Šviesios spalvos | RGB (Red, Green, Blue) + White, 16 Multicolored Options, 6 DIY Colors |
| Ilgis | 39.4 pėdos (12 m) |
| ttage | 24 Volts (Power Adapter) |
| Vattage | 18 vatų (maks. suderinamumas) |
| Kontrolės metodas | 44 klavišų IR nuotolinio valdymo pultas |
| Ypatinga funkcija | Color Changing, Dimmable, 8 Dynamic Modes |
| Naudojimas viduje / lauke | Tik patalpose |
| Medžiaga | Varis, Plastikas |
| Prekės svoris | 9.6 uncijos |
| Spalvų perteikimo indeksas (CRI) | 85.00 |
Figure 7: ETL Listed 24V Power Adapter.
9. Garantija ir palaikymas
Lepro products are designed for reliability and performance. For specific warranty details and customer support, please refer to the warranty card included with your product or visit the official Lepro websvetainę.
Kontaktinė informacija:
- Websvetainė: www.lepro.com (Prašome patikrinti oficialų websvetainėje, kurioje rasite naujausią kontaktinę informaciją.)
- El. paštas: Žiūrėkite ant produkto pakuotės arba websvetainę.
