VEVOR Electric Hydraulic Car Jack (Model TY-01LEJ) - User Manual

1. Įvadas

This manual provides comprehensive instructions for the VEVOR Electric Hydraulic Car Jack, Model TY-01LEJ. Please read and understand all safety warnings, instructions, and specifications before operating this product. Retain this manual for future reference.

The VEVOR Electric Hydraulic Car Jack is designed for lifting vehicles up to 5 tons (11000 lbs) for tire changes and minor under-vehicle maintenance. It features a cordless design, remote control operation, and integrated LED lighting for convenience and safety.

2. Saugos instrukcijos

ĮSPĖJIMAS: Jei nesilaikysite šių nurodymų, galite rimtai susižaloti arba sugadinti turtą.

• Always operate the jack on a flat, stable, and level surface.
• Ensure the vehicle is in park (P) and the parking brake is engaged. Block the wheels that are not being lifted.
• Do not exceed the rated load capacity of 5 tons (11000 lbs).
• Position the jack head directly under the vehicle's designated lifting points. Refer to your vehicle's owner's manual for proper lifting points.
• Niekada nedirbkite po transporto priemone, kurią laiko tik domkratas. Visada naudokite tinkamus domkratus transporto priemonei paremti po pakėlimu.
• Kėlimo ir nuleidimo metu rankas, kojas ir kitas kūno dalis laikykite atokiai nuo domkrato ir transporto priemonės.
• Nekeiskite domkrato ir nenaudokite jo kitiems, nei numatyta, tikslams.
• Saugokite vaikus ir pašalinius asmenis nuo darbo zonos.
• If the accumulator is unused for an extended period, recharge every 2 months to maintain battery health.
• Ensure the jack is placed vertically with your vehicle.

3. Pakuotės turinys

Verify that all items are present before initial use.

Figure 3.1: Included components of the VEVOR Electric Hydraulic Car Jack kit.

• 1 x Electric Hydraulic Jack
• 1 x AC110V-240V Adapter/Charger
• 1 x Power Pack (Lithium Battery)
• 1x nuotolinio valdymo pultas
• 1 x pirštinių poros
• 1 x veržliaraktis
• 1 x įrankių dėklas
• 1 x Power Port Cover
• 1 x Naudotojo vadovas (šis dokumentas)

4. Specifikacijos

Figure 4.1: Minimum and maximum lifting heights of the jack.

Figure 4.2: The jack is suitable for vehicles up to 5 tons, including sedans and SUVs.

5. Sąranka

1. Įkraukite akumuliatorių: Before first use, fully charge the lithium battery using the provided AC adapter. Connect the adapter to the jack's charging port and plug it into a standard wall outlet. The charging indicator will show the charging status. A full charge allows for approximately 10 lifts.


Figure 5.1: The jack's cordless power supply, including the 2000mAh lithium battery and AC110V-240V fast charger.

2. Paruoškite transporto priemonę: Park the vehicle on a firm, level surface. Engage the parking brake and place the transmission in "Park" (automatic) or a low gear (manual). Block the wheels that will remain on the ground to prevent accidental movement.
3. Locate Lifting Point: Consult your vehicle's owner's manual to identify the correct lifting points for the jack. Improper placement can damage the vehicle or cause instability.
4. Padėkite lizdą: Place the jack directly under the designated lifting point. Ensure the non-slip saddle on the jack head is centered and securely contacting the vehicle's lifting point. The jack must be placed vertically.


Figure 5.2: Proper placement of the electric hydraulic car jack under a vehicle.

6. Naudojimo instrukcijos

6.1 Transporto priemonės kėlimas

1. Ensure the jack is correctly positioned and the area is clear of obstructions and personnel.
2. Press the "Up" button on the jack's control panel or the remote control to begin lifting. The jack will extend, raising the vehicle.


Figure 6.1: Operating the jack using the wireless remote control from a distance of over 5 meters.

3. Monitor the lifting process. Stop lifting once the vehicle reaches the desired height, ensuring it is stable. The jack has a maximum lifting height of 17.7 inches (450 mm).
4. Once the vehicle is lifted, immediately place appropriate jack stands under the vehicle's frame at designated support points. Never rely solely on the jack for support.

6.2 Transporto priemonės nuleidimas

1. Įsitikinkite, kad darbo zona yra laisva.
2. Slightly lift the vehicle with the jack to relieve pressure on the jack stands, then carefully remove the jack stands.
3. Press the "Down" button on the jack's control panel or the remote control to slowly lower the vehicle.
4. Once the vehicle is fully lowered and resting on its wheels, remove the jack.

6.3 LED šviesos naudojimas

The jack is equipped with an LED light for illumination in low-light conditions. Press the light button on the jack's control panel to turn the LED light on or off. This is useful for emergency tire changes at night.

Figure 6.2: Key features of the jack, including the integrated LED lighting for visibility.

7. Priežiūra

• Valymas: After each use, wipe down the jack with a clean, dry cloth to remove dirt, grease, and moisture.
• Saugykla: Store the jack in its original tool case in a dry, clean, and secure location, away from direct sunlight and extreme temperatures.
• Akumuliatoriaus priežiūra: If the battery is not used for an extended period (more than 2 months), recharge it to maintain its capacity and lifespan.
• Patikra: Periodically inspect the jack for any signs of damage, wear, or leaks. Do not use a damaged jack.
• Tepimas: The hydraulic system is sealed and generally does not require user lubrication. If you suspect an issue, contact qualified service personnel.

8. Problemų sprendimas

9. Garantija ir palaikymas

Dėl garantijos informacijos arba techninės pagalbos žr. prie gaminio pridėtą garantinę kortelę arba apsilankykite oficialioje VEVOR svetainėje. website. Please have your model number (TY-01LEJ) and purchase date available when contacting support.

Gamintojas: VEVOR

Modelio numeris: TY-01LEJ