1. Įvadas
The WAC Lighting Lotos LED Recessed Light is a wafer-thin lighting solution designed for both remodel and new construction applications. This innovative fixture features a remote driver, eliminating the need for a large housing and making it suitable for shallow ceiling installations with as little as 3-inch plenum clearance. The integrated LED module provides high-quality light output and efficiency, with a rated lifespan of 50,000 hours. This manual provides essential information for the safe installation, operation, and maintenance of your Lotos 6-inch LED Round Recessed Light.
2. Saugos informacija
Please read all instructions carefully before installation. Failure to do so may result in electric shock, fire, or other hazards. Always consult a qualified electrician if you are unsure about any part of the installation process.
- ĮSPĖJIMAS: Elektros smūgio pavojus. Prieš montuodami ar atlikdami techninę priežiūrą, atjunkite maitinimą nuo saugiklio arba grandinės pertraukiklio.
- Šį gaminį pagal taikomą montavimo kodą turi sumontuoti asmuo, susipažinęs su gaminio konstrukcija ir veikimu bei susijusiais pavojais.
- Tinka Dry, Damp, and Wet Locations.
- IC-Rated for direct contact with insulation.
- Airtight construction prevents air leakage.
- Complies with ETL & cETL UL #1598, CEC Title 24, Energy Star 2.0, and Title 24 JA8-2016 standards.
- Nekeiskite armatūros ar jos komponentų.
3. Pakuotės turinys
Prieš pradėdami diegti, patikrinkite, ar yra visi komponentai:
- LED Light and Trim (6-inch Round)
- LED Driver and Cable
- Tvirtinimo detalių paketas
- Instrukcijų vadovas
4. Sąranka ir diegimas
The Lotos recessed light is designed for easy installation in various ceiling types. Ensure power is disconnected before proceeding.
4.1. Paruoškite įrengimo vietą
- Determine the desired location for the light fixture.
- For the 6-inch model, a 5.25-inch diameter cutout is required in the ceiling. Ensure the ceiling thickness is between 0.5 inches and 1.5 inches.
- Ensure sufficient plenum space (less than 2 inches) for the wafer-thin light and adequate space for the remote driver box.
4.2. Wiring the Driver Box
The driver box is constructed from 20-gauge steel and includes 5 knockouts for electrical connections. It supports a universal input voltage of 120V-220V-277V.
- Open the driver box and connect the building's electrical supply wires (hot, neutral, ground) to the corresponding wires inside the driver box using appropriate wire connectors.
- Secure the wiring and close the driver box.
4.3. Connecting the Light Fixture
The light engine connects to the driver box using a male-to-female quick connect locking cable.
- Connect the cable from the LED light fixture to the cable from the driver box, ensuring a secure, locking connection.
4.4. Installing the Light Fixture
The light fixture is held in place by retention clips.
- Carefully push the LED light fixture into the prepared ceiling cutout. The retention clips will secure the light in place.
- Ensure the fixture is flush with the ceiling surface.
This image displays the WAC Lighting Lotos 6-inch LED recessed light, featuring its slim, round profile connected via a cable to the remote driver box. The driver box includes a switch for color temperature selection.
A technical diagram illustrating the dimensions of the 6-inch Lotos LED recessed light and its remote driver. Key measurements include the light's diameter, overall height, and the length of the connecting cable, crucial for planning installation.
5. Naudojimo instrukcijos
5.1. Color Temperature Selection (CCT)
The Lotos recessed light features 5-CCT selectable color temperatures, allowing you to customize the light output to your preference. A switch on the remote driver box enables selection between:
- 2700K (šiltai balta)
- 3000K (minkšta balta)
- 3500K (neutrali balta)
- 4000K (šaltas baltas)
- 5000 K (dienos šviesa)
Pastaba: Select the desired color temperature before installing the driver box in the ceiling, as the switch will not be accessible once installed.
This image highlights the 5-CCT (Correlated Color Temperature) selectable feature of the Lotos recessed light. The remote driver box has a switch to choose between 2700K, 3000K, 3500K, 4000K, and 5000K, allowing customization of the light's warmth or coolness.
5.2. Pritemdymas
The Lotos LED recessed light offers smooth and continuous dimming capabilities. It is compatible with electronic low voltage (ELV) or TRIAC dimmers.
- With ELV dimmers, the light can dim down to 10%.
- With TRIAC dimmers, the light can dim down to 5%.
For optimal performance, refer to WAC Lighting's dimmer compatibility chart, if available, for recommended dimmer models.
6. Priežiūra
The WAC Lighting Lotos LED recessed light requires minimal maintenance.
- Valymas: Prieš valydami, įsitikinkite, kad įrenginys išjungtas. Nuvalykite įrenginį minkšta, sausa arba šiek tiek drėgna šluoste.amp šluoste. Nenaudokite abrazyvinių valiklių ar tirpiklių, nes jie gali pažeisti apdailą ar elektrinius komponentus.
- LED modulis: The LED module is integrated and not user-serviceable. Do not attempt to replace the LEDs.
7. Problemų sprendimas
If you experience issues with your Lotos LED recessed light, refer to the following common troubleshooting steps:
| Problema | Galima priežastis | Sprendimas |
|---|---|---|
| Šviesa neįsijungia | No power supply; loose wiring; incorrect CCT selection; faulty fixture. | Check circuit breaker/fuse. Verify all wire connections are secure. Ensure CCT switch is set to a valid position. Contact a qualified electrician or WAC Lighting support. |
| Šviesa netikėtai mirksi arba pritemsta | Incompatible dimmer; loose wiring; voltage svyravimai. | Ensure dimmer is LED-compatible (ELV or TRIAC). Check wiring connections. Consider a whole-house surge protector if voltage svyravimai yra dažni. |
| Light output is not as expected | Incorrect CCT setting; dimmer setting too low. | Adjust the CCT switch on the driver box. Increase dimmer level. |
| Driver box is bulky / Cord is too short | Limited space in ceiling; installation constraints. | Plan installation carefully to ensure adequate space for the driver box and cable length. Consider using an optional frame-in kit for pre-wiring if needed (Part # RER-FRAME). |
| Fixture burns out quickly | Power surges; faulty driver. | Ensure stable power supply. If issues persist, contact WAC Lighting for warranty support. |
8. Specifikacijos
| Funkcija | Detalė |
|---|---|
| Modelio numeris | R6ERDR-W9CS-WT |
| Dydis | 6 colių (apvalus) |
| Energijos suvartojimas | 14 vatų |
| Šviesos išvestis | 1200 liumenų |
| Spalvų temperatūra (CCT) | 5-CCT Selectable (2700K, 3000K, 3500K, 4000K, 5000K) |
| Spalvų perteikimo indeksas (CRI) | 90 |
| Įvertintos valandos | 50,000 valandos |
| ttage | 120V-277V Universal Input |
| Statybinė medžiaga | Die-cast aluminum (fixture), 20-gauge steel (driver box) |
| Gaminio matmenys | 6.88 colio ilgio x 6.88 colių pločio x 0.94 colio aukščio |
| Pjovimo skersmuo | 5.25 inches (for 6-inch model) |
| Lubų storis | 0.5–1.5 colio |
| Plenum Clearance | Less than 2 inches required |
| Pritemdymas | Smooth and continuous with ELV (to 10%) or TRIAC (to 5%) dimmers |
| Sertifikatai | ETL & cETL UL #1598, IC-Rated, Airtight, CEC Title 24, Energy Star 2.0, Title 24 JA8-2016 |
| UPC | 790576833057 |
9. Garantija ir palaikymas
„WAC Lighting“ garantuoja savo gaminių kokybę.
9.1. Informacija apie garantiją
This WAC Lighting Lotos LED Recessed Light is covered by a 5 metų ribota gamintojo garantijaŠi garantija taikoma medžiagų ir gamybos defektams, atsiradusiems įprasto naudojimo sąlygomis. Išsaugokite pirkimo įrodymą, jei galėtumėte pateikti pretenzijas dėl garantijos.
9.2. Pagalba klientams
For technical assistance, warranty claims, or any questions regarding your WAC Lighting product, please contact WAC Lighting customer support. Refer to the official WAC Lighting websvetainė, kurioje pateikiama naujausia kontaktinė informacija.
