Amazon Basics CLL-002

Amazon Basics Class II Cross-Line Laser Level

Model: CLL-002 | Brand: Amazon Basics

Įvadas

This manual provides essential information for the safe and effective operation of your Amazon Basics Class II Cross-Line Laser Level. Please read these instructions thoroughly before use and retain them for future reference.

Saugos informacija

WARNING: CLASS II LASER PRODUCT

This device emits a Class II laser beam. Avoid direct eye exposure to the laser beam. Do not stare into the beam. Do not intentionally direct the laser beam at others. Use caution when operating the laser level to prevent accidental exposure.

Pakuotės turinys

Amazon Basics Cross-Line Laser Level with L-shaped magnetic base and carrying pouch
The Amazon Basics Cross-Line Laser Level, shown with its L-shaped magnetic pivoting base and a black carrying pouch.

Produktas baigtasview

The Amazon Basics Cross-Line Laser Level is designed to project bright horizontal, vertical, or cross-line laser beams for various leveling and alignment tasks. Its compact design and versatile mounting options make it suitable for indoor and outdoor use.

Pagrindinės funkcijos:

Atgal view of the Amazon Basics Cross-Line Laser Level showing product information label and battery compartment
Galinis view of the laser level, displaying the product label and the battery compartment latch.
Dimensions of the Amazon Basics Cross-Line Laser Level: 2.8 inches L x 2.4 inches W x 3.3 inches H
Diagram illustrating the compact dimensions of the laser level: 2.8 inches (7.1 cm) length, 2.4 inches (6.1 cm) width, and 3.3 inches (8.3 cm) height.

Sąranka

1. Akumuliatoriaus įdėjimas

  1. Locate the battery compartment on the bottom of the laser level.
  2. Atidarykite akumuliatoriaus skyriaus dangtelį.
  3. Įdėkite dvi AA baterijas (nepridedamos), užtikrindami teisingą poliškumą (+/-).
  4. Saugiai uždarykite akumuliatoriaus skyriaus dangtelį.

2. Prietaiso montavimas

The laser level can be used freestanding or mounted using the included L-shaped magnetic pivoting base. The base features a 1/4-inch screw thread for attachment to the laser level and magnets for securing to metallic surfaces. It is also compatible with standard tripods (not included).

Amazon Basics Cross-Line Laser Level with L-shaped magnetic base attached
The laser level with the L-shaped magnetic pivoting base attached to its bottom, ready for use.

Naudojimo instrukcijos

1. Maitinimo įjungimas/išjungimas

To turn the device on, slide the lock switch on the side to the unlocked position. To turn off, slide the switch to the locked position.

2. Automatic (Self-Leveling) Mode

When the lock switch is in the unlocked position, the laser level will automatically self-level within 4 degrees. If the device is outside this range, the laser lines will blink to indicate it is not level. Adjust the device's position until the laser lines become solid, indicating a level projection.

Illustration of the laser level in automatic mode, projecting a level cross-line on a wall with a picture frame
In Automatic mode, the laser level self-levels to project accurate horizontal and vertical lines, ideal for hanging items like picture frames.

3. Rankinis režimas

To use the laser at a specific angle (e.g., for stair railings), slide the lock switch to the locked position. The laser lines will remain fixed at the angle you set. The lines may blink in manual mode to indicate that the self-leveling feature is disengaged.

Illustration of the laser level in manual mode, projecting an angled cross-line on a staircase
In Manual mode, the laser level can project lines at any desired angle, useful for tasks like installing stair railings.

4. Laser Line Selection

Press the power button on top of the device to cycle through different laser line modes: horizontal line, vertical line, or cross-line (both horizontal and vertical).

A green cross-line laser projected onto a wooden surface, with a hand marking a point
The laser level projecting a clear green cross-line onto a wooden surface, demonstrating its use for precise marking.
A person kneeling, using the laser level to project a horizontal green line on a wall during construction
A user demonstrating the laser level's application in a construction setting, projecting a horizontal line for alignment.

Priežiūra

Trikčių šalinimas

ProblemaGalima priežastisSprendimas
Lazerio linijos mirksi.In Automatic mode, the device is not level (outside 4-degree range). In Manual mode, blinking is normal.In Automatic mode, adjust the device's position until the lines become solid. No action needed in Manual mode.
No laser lines.Batteries are dead or incorrectly installed. Device is off.Check battery polarity and replace if necessary. Ensure the lock switch is in the unlocked position.
Lazerio linijos yra blankios.Low battery power. Bright ambient light.Replace batteries. Use the laser level in areas with less ambient light for better visibility.

Specifikacijos

Garantija ir palaikymas

Dėl garantijos informacijos arba klientų aptarnavimo kreipkitės į „Amazon Basics“ oficialų atstovą. websvetainėje arba susisiekite tiesiogiai su „Amazon“ klientų aptarnavimo tarnyba. Išsaugokite pirkimo kvitą garantiniams reikalavimams.