Leitz 2415126

Leitz TruSens Z-3000/Z-3500 Air Purifier Odour and VOC Replacement Filter Manual

Modelis: 2415126 | Prekinis ženklas: Leitz

Įvadas

This manual provides essential information for the Leitz TruSens Odour and VOC Replacement Filter, designed for use with Leitz TruSens Z-3000 and Z-3500 air purifiers. This filter is a crucial component for maintaining air quality by reducing unwanted odours and Volatile Organic Compounds (VOCs) in your environment.

The filter features three layers of activated carbon pellets, specifically formulated to combat common cooking and cleaning odours, as well as reduce airborne VOCs such as ammonia, acetone, and formaldehyde.

Leitz TruSens Odour and VOC Replacement Filter packaging

Image: Packaging of the Leitz TruSens Odour and VOC Replacement Filter, showing product details and compatibility with Z-3000 series.

Saugos informacija

  • Always unplug the air purifier from the power outlet before attempting to replace the filter.
  • Do not wash or reuse the activated carbon filter. It is designed for single use and replacement.
  • Keep filters out of reach of children and pets.
  • Panaudotus filtrus išmeskite laikydamiesi vietinių taisyklių.

Sąranka ir diegimas

Follow these steps to install the Leitz TruSens Odour and VOC Replacement Filter into your compatible Leitz TruSens Z-3000 or Z-3500 air purifier.

  1. Paruoškite oro valytuvą: Įsitikinkite, kad oro valytuvas yra išjungtas ir atjungtas nuo maitinimo šaltinio.
  2. Prieiga prie filtro skyriaus: Gently turn the air purifier upside down. Locate the filter compartment cover at the base of the unit.
  3. Nuimkite dangtelį: Twist the filter compartment cover counter-clockwise to unlock and remove it.
  4. Pašalinti naudotą filtrą: Carefully pull out the existing filter drum. The Odour and VOC carbon filter is part of this drum. Separate the old carbon filter from the HEPA filter drum if they are combined.
  5. Install New Carbon Filter: Place the new Leitz TruSens Odour and VOC Replacement Filter onto the HEPA filter drum. Ensure it fits securely.
  6. Reinsert Filter Drum: Place the assembled filter drum back into the air purifier, ensuring it is properly seated.
  7. Užfiksuokite dangtelį: Replace the filter compartment cover and twist it clockwise until it locks into place.
  8. Iš naujo nustatyti filtro indikatorių: Plug in and power on your air purifier. Refer to your air purifier's main manual for instructions on how to reset the filter replacement indicator light. This typically involves pressing and holding a specific button for a few seconds.
Step-by-step filter installation process for Leitz TruSens air purifier

Image: A four-panel image illustrating the steps to remove and install the filter drum in a Leitz TruSens air purifier, including twisting the base, removing the old filter, inserting the new filter, and securing the base.

Leitz TruSens air purifier with filter drum removed, showing internal components

Image: A Leitz TruSens air purifier with its filter drum removed, placed on a wooden floor next to a child, illustrating the filter's size and how it fits into the unit.

Veiklos informacija

The Leitz TruSens Odour and VOC Replacement Filter operates continuously as part of your Leitz TruSens Z-3000 or Z-3500 air purifier system. Once installed, the air purifier draws air through the filter, where the activated carbon pellets absorb odours and VOCs.

The effectiveness of the filter is directly related to the air purifier's operation. Ensure your air purifier is running according to its own operating instructions for optimal performance of the Odour and VOC filter.

Woman and child cooking in a kitchen, symbolizing odor reduction

Image: A woman and child cooking in a kitchen, representing the filter's ability to reduce cooking odors and improve indoor air quality.

Priežiūra ir keitimas

To ensure your air purifier continues to perform effectively in removing odours and VOCs, regular replacement of the carbon filter is essential.

  • Keitimo grafikas: It is recommended to replace the Leitz TruSens Odour and VOC carbon filter every 3 mėnesių. This duration may vary depending on usage frequency and air quality conditions in your environment.
  • Indikatoriaus lemputė: Your Leitz TruSens Z-3000/Z-3500 air purifier is equipped with an indicator light that will glow red when the filter needs to be replaced. Always follow the air purifier's instructions for resetting this indicator after replacement.
  • Šalinimas: Dispose of the used filter responsibly according to local waste disposal guidelines.

For replacement filters, ensure you purchase genuine Leitz TruSens Odour and VOC Replacement Filters (Model 2415126) to maintain compatibility and performance.

Trikčių šalinimas

If you encounter issues after installing your replacement filter, consider the following:

  • Filtro indikatoriaus lemputė dega: If the filter replacement indicator light does not turn off after installing a new filter, ensure you have followed the specific reset procedure for your Z-3000 or Z-3500 air purifier. This usually involves pressing and holding the filter reset button for several seconds.
  • Persistent Odours/VOCs:
    • Verify the filter is correctly installed and seated firmly within the air purifier.
    • Check if the air purifier is operating at an appropriate fan speed for the room size and level of contaminants.
    • Ensure the filter is not past its recommended replacement interval.
    • Consider the source of the odours; some strong or continuous sources may require additional ventilation or source removal.
  • Neįprastas triukšmas: If you hear unusual noise after filter replacement, ensure the filter drum and its cover are securely locked in place.

Specifikacijos

AtributasDetalė
Prekės ženklasLeitz
Modelio numeris2415126
SuderinamumasLeitz TruSens Z-3000, Z-3500 Air Purifiers
Filtro tipasOdour and VOC Carbon Filter
Filtro sluoksniai3-layer activated carbon pellets
MedžiagaAktyvuota anglis
Rekomenduojamas keitimasEvery 3 months (depending on usage)
Prekės svoris1.78 svaro (0.81 kg)
Gaminio matmenys19.69 x 19.69 x 11.02 colio (apytiksliai 50 x 50 x 28 cm)
Leitz TruSens Z-3000/Z-3500 air purifier with compatibility checkmark

Image: A Leitz TruSens air purifier model, clearly indicating compatibility with Z-3000 and Z-3500 series.

Susiję dokumentai - 2415126

Preview „Leitz“ pinigų grąžinimo akcija: visos sąlygos ir nuostatos
Oficialios „Leitz“ pinigų grąžinimo akcijos sąlygos, kuriose išsamiai aprašomi tinkamumo kriterijai, atitinkami produktai, kaip gauti pinigų grąžinimą ir bendrosios dalyvavimo taisyklės.
Preview Leitz Icon Smart Labeling System User Guide: Setup, Operation, and Troubleshooting
Comprehensive user guide for the Leitz Icon Smart Labeling System. Learn how to set up, connect, operate, and troubleshoot your Leitz Icon label printer for efficient label creation.
Preview Leitz Icon Printer: Uživatelská Příručka pro Tisk Štítků
„Leitz“ piktograma, įdiegta „Leitz“ piktograma, prijungta prie tinklo (USB, „Wi-Fi“), prijungta prie valdymo skydelio, pašalinta ir pašalinta problema. Obsahuje technické specifikace a záruční informace.
Preview Leitz Focomat Ic automatinio fokusavimo didintuvas – tiksliosios fotografijos įranga
Detaliau baigtaview „Leitz Focomat Ic“ automatinio fokusavimo didintuvo aprašymas, pabrėžiant jo tikslų dizainą, automatinio fokusavimo galimybes 35 mm negatyvams, konstrukcijos detales, galimus priedus ir kainoraštį. Sukūrė „E. Leitz, Inc.“, kad būtų galima naudoti aukštos kokybės fotografinius padidinimus.
Preview Leitz Icon spausdintuvo naudotojo vadovas
„Leitz Icon“ išmaniosios ženklinimo sistemos spausdintuvo naudotojo vadovas, kuriame aprašoma sąranka, veikimas, trikčių šalinimas ir techninės specifikacijos.
Preview Leitz Cosy belaidės pelės naudotojo vadovas ir vadovas
Gaukite išsamias instrukcijas, kaip naudoti „Leitz Cosy“ belaidę pelę. Sužinokite apie sąranką, „Bluetooth“ ir USB ryšį, DPI nustatymus, saugą ir technines specifikacijas. Oficialus naudotojo vadovas.