Produktas baigtasview
The 01 MH-13001 LCD Digital Humidity Controller is a high-precision device designed to accurately monitor and control environmental humidity. Its large, clear LCD display ensures easy readability and operation. Constructed from durable, high-quality plastic, this controller is built for longevity and reliable performance. It is compact and lightweight, making it highly portable and an essential tool for various applications, particularly in environments requiring precise humidity management such as breeding farms.
Image: The 01 MH-13001 LCD Digital Humidity Controller, showing its compact design and clear digital display.
Pagrindinės savybės
- Didelis LCD ekranas: Enhances readability and simplifies operation.
- Aukštos kokybės konstrukcija: Made from durable materials for extended lifespan.
- High-Precision Humidity Control: Ensures accurate environmental humidity management.
- Kompaktiškas ir nešiojamas: Small size and light weight make it easy to transport and install.
- Universalus pritaikymas: Suitable for equipment and settings requiring humidification or dehumidification, such as breeding farms.
Sąranka ir diegimas
Before installation, ensure the power supply is disconnected. The controller operates on AC 220V. Follow the wiring diagram carefully to connect the power, load, and sensor.
Pakuotės turinys:
- 1 x Humidity Controller
- 1 x drėgmės jutiklis
- 1 x naudojimo instrukcija (šis dokumentas)
Laidų prijungimo instrukcijos:
Refer to the diagram below for proper wiring connections. Ensure all connections are secure to prevent electrical hazards.
Image: Wiring diagram illustrating connections for power, load, and the humidity sensor. Terminals 1 and 2 are for the load, 3 and 4 for power input, and 5, 6, 7 for the sensor.
Image: The high-quality humidity sensor with its connecting cable, designed for durability and long service life.
Naudojimo instrukcijos
The controller features a clear LCD display and intuitive buttons for setting and monitoring humidity levels.
Vaizdas: Stambus planas view of the controller's LCD display and control buttons. Labels indicate 'D' for Dehumidify, 'H' for Humidification, '%RH' for Humidity display, 'S' for Setting, 'R' for Reset, and Up/Down arrows for adjustment.
Mygtukų funkcijos:
- S (Setting) Button: Press to enter setting mode. Use Up/Down arrows to adjust the desired humidity set point. Press 'S' again to confirm and exit.
- Rodyklės aukštyn mygtukas: Increases the humidity set point or navigates through menu options.
- Rodyklės žemyn mygtukas: Decreases the humidity set point or navigates through menu options.
- R (Atstatymo) mygtukas: Resets the controller to default settings or clears alarms.
- D (Dehumidify) Indicator: Illuminates when the controller is actively dehumidifying.
- H (Humidification) Indicator: Illuminates when the controller is actively humidifying.
The large LCD displays the current humidity percentage (%RH). The controller automatically activates humidification or dehumidification equipment based on the set humidity range.
Priežiūra
To ensure optimal performance and longevity of your humidity controller, follow these general maintenance guidelines:
- Valymas: Periodically wipe the exterior of the controller with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Jutiklio priežiūra: Keep the humidity sensor clean and free from dust or debris. Avoid exposing the sensor to extreme temperatures or direct moisture beyond its operating range.
- Vėdinimas: Ensure the controller's ventilation slots are not obstructed to prevent overheating.
- Saugykla: Jei prietaisą ketinate laikyti ilgesnį laiką, laikykite jį vėsioje, sausoje vietoje, apsaugotoje nuo tiesioginių saulės spindulių ir ekstremalių temperatūrų.
Trikčių šalinimas
If you encounter issues with your MH-13001 Humidity Controller, consider the following common troubleshooting steps:
| Problema | Galima priežastis | Sprendimas |
|---|---|---|
| Valdiklis neįsijungia. | Nėra maitinimo šaltinio arba netinkamai sujungti laidai. | Check power connection (AC 220V). Verify wiring according to the diagram. |
| Netikslūs drėgmės rodmenys. | Sensor is dirty or damaged; sensor cable is loose. | Clean the sensor. Ensure the sensor cable is securely connected. Replace sensor if damaged. |
| Humidification/Dehumidification not activating. | Set point is incorrect; load is not connected or faulty. | Adjust the humidity set point. Check the connection and functionality of the humidification/dehumidification equipment. |
| Ekrane rodomas klaidos kodas. | Internal error or sensor issue. | Try resetting the device using the 'R' button. If the error persists, contact customer support. |
For issues not covered here, please contact the manufacturer's support.
Specifikacijos
| Parametras | Vertė |
|---|---|
| Modelis | MH-13001 (0116ap5ozvhw) |
| Medžiaga | Plastikiniai |
| Darbo ttage | AC 220V 50HZ/60HZ |
| Energijos suvartojimas | 3W |
| Matavimo diapazonas | 1% ~ 99% RH |
| Ekrano tikslumas | 1% RH |
| Matavimo klaida | ± 3% RH |
| Valdymo tikslumas | 1% RH |
| Darbinė temperatūra | 0 ~ 80 ℃ |
| Matmenys (I x P x A) | Approx. 8.5 x 7.5 x 3.5 cm (3.3 x 3.0 x 1.4 in) |
| Svoris | Apytiksliai 235 g (8.3 oz) |
| Kilmės šalis | Kinija |
Image: The MH-13001 controller displaying its approximate dimensions for reference.
Garantija ir palaikymas
Information regarding specific warranty terms and availability of spare parts is not provided in the product details. For warranty claims, technical support, or inquiries about spare parts, please contact the manufacturer directly using the contact information provided with your purchase or on the official brand websvetainę.
Software updates are not applicable or information is unavailable for this device.