Danfoss 015G4550

Danfoss Aero RAVL Thermostatic Radiator Valve

Modelis: 015G4550

Įvadas

This manual provides essential information for the installation, operation, and maintenance of your Danfoss Aero RAVL Thermostatic Radiator Valve, Model 015G4550. This device is designed to regulate room temperature efficiently, contributing to energy savings and enhanced comfort. Please read these instructions carefully before installation and use to ensure proper function and safety.

Saugos informacija

Produktas baigtasview

The Danfoss Aero RAVL Thermostatic Radiator Valve is a modern, gas-filled thermostatic head designed for precise temperature control. It features a fast response time of approximately 10 minutes and offers tactile feedback for every 0.5°C temperature change. The design allows for easy, tool-free mounting and is compatible with Danfoss RAVL type valve housings.

Pagrindinės funkcijos:

Komponentai:

Danfoss Aero RAVL Thermostatic Radiator Valve front view

1 pav.: priekis view of the Danfoss Aero RAVL Thermostatic Radiator Valve. This image displays the main body of the valve head with its temperature setting dial and the red indicator for the current setting.

Danfoss Aero RAVL Thermostatic Radiator Valve with RAVL 26mm connection label

2 pav.: šonas view of the Danfoss Aero RAVL Thermostatic Radiator Valve, highlighting its compatibility with RAVL 26mm connections. The image shows the connection mechanism at the base of the thermostatic head.

Montavimas

Proper installation is crucial for the optimal performance of your thermostatic radiator valve. Follow these steps carefully.

Suderinamumo patikrinimas:

The Danfoss Aero RAVL thermostatic head is specifically designed for Danfoss RAVL valve bodies with a 26 mm mounting diameter. Ensure your existing valve body is compatible before proceeding with installation.

Danfoss thermostatic head compatibility chart

Figure 3: Compatibility guide for replacing old Danfoss radiator thermostats. This chart illustrates that the Aero™ RA/VL head is suitable for RAVL valve bodies with a 26 mm valve diameter.

Diagram of a RAVL valve body with 26mm dimension

Figure 4: Technical diagram of a Danfoss RAVL valve body, indicating the 26 mm diameter for proper head attachment. This diagram helps identify the correct valve type.

Danfoss Aero RAVL installation diagram

Figure 5: Installation diagram showing the Danfoss Aero™ RA/VL thermostatic head fitting onto an old Danfoss RA/VL valve with a 26 mm mounting diameter. The image highlights the clamp ring connection for identification.

Montavimo instrukcijos:

  1. Prepare the Valve Body: Ensure the existing RAVL valve body is clean and free from debris. If replacing an old thermostatic head, remove it carefully.
  2. Set the Thermostatic Head: Turn the setting dial on the new Aero RAVL head to its maximum setting (usually '5' or '28°C') to fully retract the pin.
  3. Galvos padėtis: Place the Aero RAVL thermostatic head onto the RAVL valve body. Ensure it is aligned correctly.
  4. Secure the Mounting Ring: Push the mounting ring firmly onto the valve body until you hear an audible 'click'. This confirms the head is securely attached. No tools are required for this step.
  5. Patikrinkite įdiegimą: Gently try to rotate the head. It should be firmly attached and not wobble.

Naudojimo instrukcijos

The Danfoss Aero RAVL valve allows for manual temperature control to maintain your desired room temperature.

Temperatūros nustatymas:

Danfoss Aero RAVL valve installed on a radiator

Figure 6: The Danfoss Aero RAVL thermostatic valve installed on a radiator within a room setting. This illustrates the product's appearance when in use.

Priežiūra

The Danfoss Aero RAVL thermostatic valve requires minimal maintenance to ensure long-term performance.

Trikčių šalinimas

If you experience issues with your thermostatic radiator valve, consult the table below for common problems and solutions.

ProblemaGalima priežastisSprendimas
Radiator remains cold despite high setting.Valve pin stuck in closed position; air in the system; system pressure too low.Remove the thermostatic head and gently press the valve pin several times to free it. Bleed the radiator. Check system pressure and refill if necessary.
Room is too cold/hot, inconsistent temperature.Thermostatic head obstructed; incorrect setting; external heat sources/drafts.Ensure the head is not covered by curtains or furniture. Adjust the setting. Eliminate drafts or reposition heat-emitting objects.
Valve head is loose or falls off.Mounting ring not fully engaged.Re-attach the thermostatic head, ensuring the mounting ring clicks securely into place.
No tactile feedback when adjusting dial.Vidinio mechanizmo problema.Contact Danfoss support or a qualified technician for inspection.

Specifikacijos

FunkcijaDetalė
Modelio pavadinimasDanfoss Aero RAVL
Modelio numeris015G4550
Gaminio matmenys4.33 "D x 5.12" P x 10.63" A
Prekės svoris0.15 kilogramo (5.3 uncijos)
Valdiklio tipasValdymas rankomis
Temperatūros valdymo tipasvadovas
Temperatūros diapazonas7–28 °C
Reagavimo laikasIki 10 minučių
Valdymo tikslumas0.2 tūkst
Montavimo tipasDirect valve mount (RAVL 26mm)
MedžiagaPlastikiniai
SpalvaBaltas
Ypatinga funkcijaEnergijos efektyvumas

Garantija ir palaikymas

Danfoss products are manufactured to high-quality standards. For information regarding warranty terms and conditions, please refer to the documentation provided with your purchase or visit the official Danfoss website. For technical support, spare parts, or service inquiries, please contact your local Danfoss representative or authorized dealer.

Daugiau informacijos ir palaikymo išteklių galite rasti adresu Danfoss Store on Amazon.

Susiję dokumentai - 015G4550

Preview „Danfoss EcoTM“ išmaniojo termostato įrengimo ir naudojimo instrukcija
Išsamus „Danfoss EcoTM“ išmaniojo termostato įrengimo, naudojimo ir trikčių šalinimo vadovas. Sužinokite apie funkcijas, programėlės prijungimą ir adapterių suderinamumą, kad galėtumėte efektyviai valdyti namų šildymą.
Preview „Danfoss Aero®“ ir „Danfoss Aveo® T“amper Shells diegimo vadovas
„Danfoss Aero®“ ir „Danfoss Aveo®“ montavimo vadovasampER korpusai, skirti RAV ir RAVL vožtuvų jungtims. Pridedamos nuoseklios instrukcijos ir gaminio informacija.
Preview „Danfoss EcoTM“ išmaniojo termostatinio radiatoriaus vožtuvo montavimo ir naudojimo vadovas
Išsamus „Danfoss EcoTM“ išmaniojo termostatinio radiatoriaus vožtuvo įrengimo, naudojimo ir trikčių šalinimo vadovas, įskaitant programėlės integravimą, planavimą ir technines specifikacijas efektyviam namų šildymui.
Preview Danfoss Aero® RA/V Thermostatic Sensor Installation and Temperature Limitation Guide
Official installation guide for the Danfoss Aero® RA/V thermostatic sensor series. Includes instructions for installation, setting maximum and minimum temperature limits, and identifying blind marks. Features model numbers 015G4560, 013G1246, and 015G4951.
Preview „Danfoss EcoTM“ elektroninio radiatoriaus termostato įrengimo ir naudojimo instrukcija
Išsamus „Danfoss EcoTM“ elektroninio radiatorių termostato įrengimo ir naudojimo vadovas. Sužinokite apie sąranką, funkcijas, programėlės integravimą, temperatūros programavimą ir technines specifikacijas, skirtas efektyviam namų šildymo valdymui.
Preview „Danfoss EcoTM“ elektroninis radiatorių termostatas: įrengimo ir naudojimo vadovas
Išsamus vadovas, kaip įrengti, nustatyti ir naudoti „Danfoss EcoTM“ elektroninį radiatorių termostatą efektyviam namų šildymo valdymui. Sužinokite apie adapterių suderinamumą, programėlių integravimą, planavimą ir technines specifikacijas.