Ergotron 45-647-216

Ergotron HX HD Premium Heavy Duty Gaming Monitor Arm User Manual

Model: 45-647-216 | Brand: Ergotron

1. Įvadas

Thank you for choosing the Ergotron HX HD Premium Heavy Duty Gaming Monitor Arm. This monitor arm is designed to provide robust support and flexible positioning for large, curved ultrawide monitors, enhancing your ergonomic setup and reclaiming valuable desk space. Please read this manual thoroughly before installation and use to ensure safe and optimal performance.

2. Kas yra dėžutėje

Prieš pradėdami diegti, patikrinkite, ar yra visi komponentai:

  • HX Desk Monitor Arm with HD Pivot (White)
  • Pratęsimas
  • Stalas Clamp
  • Grommet kalnas
  • Montavimo įranga
Ergotron HX Monitor Arm components including arm, extension, desk clamp, žiedinis laikiklis ir įvairūs varžtai bei įrankiai.

Figure 2.1: Included components for the Ergotron HX Monitor Arm.

3. Gaminio specifikacijos

Modelio numeris45-647-216
Gaminio matmenys18.6 x 11.2 x 7.7 colio
Prekės svoris18.3 svaro
MedžiagaMetalas
SpalvaBaltas
Montavimo tipasStalinis laikiklis (stalinis laikiklis)amp arba žiedas)
Judėjimo tipasArtikuliuojantis
Suderinami įrenginiaiMonitors up to 49 inches, 28 to 42 lbs
VESA suderinamumas75x75mm, 100x100mm
Didžiausias pasvirimo kampas20 laipsnių
Kėlimo diapazonas11.5 inches (screen rises 17.8 inches from worksurface)
Rotacija360 laipsnių
Stalas Clamp Storis0.4–2.6 colio (1–6.6 cm)
Grommet Mount Hole Diameter0.4–2 colio (1–5.1 cm)
Iš viršaus į apačią view of the Ergotron HX Monitor Arm showing its full extension and retraction capabilities, with measurements of 6 inches (15.4 cm) for minimum depth and 17.6 inches (44.7 cm) for maximum depth from the mounting point, and a vertical range of 23.6 inches (59.4 cm).

Figure 3.1: Ergotron HX Monitor Arm dimensions and range of motion.

Šoninė view of the Ergotron HX Monitor Arm with a monitor attached, illustrating an 11.5 inch (29 cm) vertical lift range.

Figure 3.2: Vertical lift range of the monitor arm.

Šoninė view of the Ergotron HX Monitor Arm showing its horizontal reach, with measurements indicating a minimum depth of 4 inches (10 cm) and a maximum depth of 9.8-12.9 inches (24.9-32.8 cm) from the mounting point to the VESA plate, and a total arm length of 6.7 inches (17 cm) for the lower arm segment and 5.8 inches (15 cm) for the base.

Figure 3.3: Horizontal reach and dimensions of the monitor arm.

4. Sąranka ir diegimas

The Ergotron HX Monitor Arm offers two primary mounting options: a desk clamp for surface edges and a grommet mount for installation through a surface hole. Ensure your desk surface meets the specified thickness requirements for your chosen mounting method.

4.1. Choosing a Mounting Method

  • Stalas Clamp: Suitable for desk edges 0.4 to 2.6 inches (1-6.6 cm) thick.
  • Žiedinio tvirtinimas: Requires a surface hole with a diameter of 0.4 to 2 inches (1-5.1 cm) and a desk thickness of up to 2.8 inches (7.2 cm).
Diagram illustrating two mounting options for the Ergotron HX Monitor Arm: a desk clamp for surfaces 0.4-2.6 inches (1-6.6 cm) thick, and a grommet mount for surfaces up to 2.8 inches (7.2 cm) thick with a hole diameter of 0.4-2 inches (1-5.1 cm).

4.1 pav.: Stalo skyriusamp and grommet mount options with dimensions.

4.2. Monitor Compatibility (VESA)

The monitor arm is compatible with VESA patterns 75x75mm and 100x100mm. It supports monitors up to 49 inches and weighing between 28 to 42 lbs (12.7 to 19.1 kg).

Diagram comparing 3000R and 1000R curved monitors, showing that the 1000R curve is deeper (12 inches / 30.4 cm) than the 3000R curve (6 inches / 15.2 cm), indicating the arm's compatibility with deeply curved ultrawide displays.

Figure 4.2: Compatibility with 1000R curved ultrawide monitors.

4.3. Diegimo žingsniai

For detailed visual instructions, please refer to the official installation video below. The video demonstrates the process for mounting the HX Monitor Arm with HD Heavy-Duty Pivot, including VESA mount installation and tension adjustments.

Video 4.1: How to Install the HX Monitor Arm with HD Heavy-Duty Pivot. This video provides a step-by-step guide for mounting the monitor arm, including attaching the VESA plate to the monitor, securing the arm to the desk, and making initial tension adjustments.

5. Naudojimo instrukcijos

The Ergotron HX Monitor Arm is designed for fluid and effortless adjustments, allowing you to customize your viewpatirtį.

5.1. Monitoriaus padėties reguliavimas

The arm offers a full range of motion, including 11.5 inches of lift, allowing the screen to rise up to 17.8 inches from the worksurface. You can also rotate the monitor 360 degrees and tilt it 20 degrees to achieve optimal ergonomic positioning.

Video 5.1: HX Monitor Arm with HD Pivot: Top Features & Benefits. This video highlights the key features and benefits of the monitor arm, demonstrating its smooth movement, tilt, and rotation capabilities for an enhanced user experience.

A person using a large curved ultrawide monitor mounted on an Ergotron HX arm, positioned ergonomically for gaming or work, demonstrating the arm's ability to hold heavy displays in various positions.

Figure 5.1: Ergonomic positioning with the Ergotron HX Monitor Arm.

5.2. Adjusting Arm Tension

If the arm does not hold its position or is too stiff to move, you may need to adjust the tension. Use the provided Allen wrench to turn the tension screw. Turn clockwise to increase tension (for heavier monitors) or counter-clockwise to decrease tension (for lighter monitors). Adjust gradually until the arm holds the monitor securely in any position with minimal effort.

5.3. Kabelių valdymas

The monitor arm features integrated cable management to keep your workspace tidy. Route monitor cables through the designated channels along the arm to maintain a clean and organized setup.

Iš arti view of the Ergotron HX Monitor Arm's cable management system, showing cables neatly routed along the arm's underside through integrated clips and channels.

Figure 5.2: Integrated cable management system.

6. Priežiūra

To ensure the longevity and smooth operation of your Ergotron HX Monitor Arm, perform the following maintenance:

  • Valymas: Wipe down the arm with a soft, damp skudurėliu. Venkite abrazyvinių valiklių ar tirpiklių.
  • Įtempimo patikrinimas: Periodically check the arm tension to ensure it is appropriate for your monitor's weight. Adjust as needed.
  • Tvirtinimo detalės: Ensure all mounting hardware and fasteners are securely tightened. Do not overtighten.

7. Problemų sprendimas

Jei kyla problemų dėl monitoriaus laikiklio, žr. šiuos dažniausiai pasitaikančius sprendimus:

  • Arm drifts down or up: Adjust the arm tension using the provided Allen wrench. Increase tension if the arm drifts down, decrease if it springs up.
  • Monitor wobbles: Ensure all mounting screws and the desk clamp/grommet mount are securely tightened. Check that the VESA plate is firmly attached to the monitor.
  • Sunkumas judinant ranką: If the arm is too stiff, decrease the tension slightly. If it's too loose, increase the tension.

8. Svarbi saugos informacija

  • Neviršykite maksimalaus svorio pajėgumo – 42 kg (19.1 svarų).
  • Ensure the mounting surface is strong enough to support the combined weight of the arm and monitor.
  • Keep children and pets away from the monitor arm during installation and adjustment.
  • Always use two people when lifting and mounting heavy monitors onto the arm.
  • Atidžiai perskaitykite ir vykdykite visas instrukcijas.

9. Garantija ir palaikymas

Ergotron products are built to last and set the standard for quality. The Ergotron HX HD Premium Heavy Duty Gaming Monitor Arm comes with a 10 metų garantija. For technical support, warranty claims, or further assistance, please visit the official Ergotron websvetainėje arba susisiekite su jų klientų aptarnavimo tarnyba.

Norėdami gauti daugiau informacijos ir palaikymo, apsilankykite: Ergotron Store on Amazon

Susiję dokumentai - 45-647-216

Preview „Ergotron HX Heavy Duty Tilt Pivot“ montavimo ir reguliavimo vadovas
Išsamus „Ergotron HX Heavy-Duty Tilt Pivot“ montavimo ir reguliavimo vadovas su nuosekliomis instrukcijomis, saugos atsargumo priemonėmis ir informacija apie keliamąją galią.
Preview Ergotron LX Pro Desk Monitor Arm Disassembly and Material Guide
Detailed disassembly instructions and material call-out for the Ergotron LX Pro Desk Monitor Arm family, including model numbers 45-682, 45-686, 45-690, 45-695, 45-708, 45-709, and 45-710. Includes disposal information and material breakdown.
Preview „Ergotron HX“ stalo monitoriaus laikiklis su VHD pasukamu ašimi – montavimo vadovas ir naudotojo vadovas
Išsamus „Ergotron HX“ stalo monitoriaus laikiklio su VHD Pivot montavimo vadovas ir naudotojo vadovas. Sužinokite, kaip saugiai sumontuoti, reguliuoti ir naudoti monitoriaus laikiklį, kad būtų užtikrinta optimali ergonomika. Apima saugos įspėjimus, specifikacijas ir palaikymo kontaktinę informaciją.
Preview „Ergotron HX“ stalo monitoriaus laikiklis – montavimo vadovas ir naudotojo vadovas
Išsamus „Ergotron HX“ stalinio monitoriaus laikiklio montavimo vadovas ir naudotojo vadovas, kuriame išsamiai aprašytas surinkimas, reguliavimas, saugos priemonės ir gaminio specifikacijos. Sužinokite, kaip saugiai sumontuoti ir naudoti monitoriaus laikiklį, kad jis būtų optimaliai ergonomiškas.
Preview „Ergotron HX“ stalo monitoriaus laikiklis: įrengimo ir naudojimo vadovas
Išsamus „Ergotron HX“ stalo monitoriaus rankos su „Constant Force™“ technologija montavimo ir reguliavimo vadovas. Įtrauktas dalių sąrašas, nuoseklios surinkimo instrukcijos, reguliavimo procedūros, saugos įspėjimai ir informacija apie keliamąją galią.
Preview „Ergotron LX Pro Arm“ vieno ekrano stalo laikiklis – montavimo ir reguliavimo vadovas
Šiame vadove pateikiamos išsamios instrukcijos, kaip sumontuoti, reguliuoti ir saugiai naudoti „Ergotron LX Pro Arm“ vieno ekrano stalo laikiklį. Jame aprašomi dalių identifikavimo, surinkimo žingsniai, įvairūs reguliavimo būdai, pvz., pakėlimas, pakreipimas, pasukimas ir trintis, taip pat svarbūs saugos įspėjimai ir informacija apie keliamąją galią.