Simplex 4100-9610 Remote Annunciator User Manual

1. Įvadas

This manual provides essential information for the proper installation, operation, and maintenance of the Simplex 4100-9610 Remote Annunciator. The 4100-9610 is designed to provide remote indication and control capabilities for compatible Simplex fire alarm control panels. Please read this manual thoroughly before attempting any installation or operation.

2. Saugos informacija

Visada laikykitės šių saugos priemonių, kad išvengtumėte sužalojimų ir įrangos sugadinimo:

• Montavimą ir techninę priežiūrą turi atlikti tik kvalifikuoti darbuotojai.
• Disconnect all power sources before installing or servicing the annunciator.
• Laikykitės visų vietinių ir nacionalinių elektros instaliacijos kodeksų ir reglamentų.
• Do not operate the annunciator if it appears damaged.
• Užtikrinkite tinkamą įžeminimą, kad išvengtumėte elektros smūgio.
• Keep the annunciator away from moisture and extreme temperatures.

This device is part of a fire safety system. Proper functioning is critical for life safety. Regular testing and maintenance are required.

3. Pakuotės turinys

Upon opening the package, verify that all components are present and undamaged. The standard package for the Simplex 4100-9610 Remote Annunciator typically includes:

• Simplex 4100-9610 Remote Annunciator Unit
• Mounting Hardware (screws, anchors, etc. - may vary)
• Installation Guide / Quick Start Guide (this manual provides detailed instructions)

Figure 3.1: Simplex 4100-9610 Remote Annunciator as typically packaged. The image shows the annunciator unit, which consists of a metal enclosure housing circuit boards and connectors, secured within cardboard protective corners and plastic strapping.

Jei trūksta kokių nors daiktų arba jie pažeisti, nedelsdami susisiekite su tiekėju.

4. Sąranka ir diegimas

The 4100-9610 Remote Annunciator requires careful installation to ensure proper operation and compliance with safety standards. Refer to the specific wiring diagrams provided with your fire alarm control panel for detailed connection instructions.

4.1 Montavimas

1. Choose a suitable location for the annunciator, typically near an entrance or a manned station, ensuring visibility and accessibility.
2. Ensure the mounting surface is flat and capable of supporting the annunciator's weight.
3. Mark the mounting holes on the wall using the annunciator's enclosure as a template.
4. Drill pilot holes and install appropriate wall anchors if necessary.
5. Secure the annunciator to the wall using the provided mounting hardware.

4.2 Laidai

All wiring must comply with NFPA 70 (National Electrical Code) and NFPA 72 (National Fire Alarm and Signaling Code), as well as local codes.

• Maitinimo jungtis: Connect the annunciator to the designated power source from the fire alarm control panel. Ensure correct polarity. The annunciator is battery powered, likely drawing power from the main panel's battery backup system.
• Communication Bus: Connect the annunciator to the fire alarm control panel's communication bus (e.g., IDNet, MAPNET II) using shielded twisted-pair cable as specified by Simplex.
• Įžeminimas: Ensure the annunciator enclosure is properly grounded to the building's protective earth ground.

Pastaba: Refer to the specific installation instructions for your Simplex Fire Alarm Control Panel for detailed wiring diagrams and compatibility information.

5. Naudojimo instrukcijos

The Simplex 4100-9610 Remote Annunciator provides visual and audible indications of system status and allows for basic control functions. Specific functions may vary based on the configuration of the connected fire alarm control panel.

5.1 Būsenos indikatoriai

The annunciator typically features various LED indicators to display system status:

• Signalizacija: Užsidega, kai aptinkama gaisro signalizacija.
• Bėda: Illuminates when a system fault or trouble condition occurs.
• Priežiūra: Illuminates for supervisory conditions (e.g., sprinkler valve tamper).
• Galia: Indicates that primary power is supplied to the system.

5.2 Valdymo funkcijos

Common control buttons on a remote annunciator may include:

• Pripažinti: Silences the annunciator's local audible signal and acknowledges new events at the control panel.
• Tyla: Silences audible notification appliances (horns, strobes) throughout the system.
• Atstatyti: Resets the fire alarm system after an alarm or trouble condition has been cleared.
• Lamp Testas: Illuminates all LEDs to verify their functionality.

Svarbu: Always follow your facility's emergency procedures when responding to alarm conditions.

6. Priežiūra

Regular maintenance ensures the continued reliable operation of your Simplex 4100-9610 Remote Annunciator and the overall fire alarm system.

• Vizuali apžiūra: Periodically inspect the annunciator for any signs of physical damage, loose connections, or excessive dust accumulation.
• Valymas: Clean the exterior of the annunciator with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Funkcinis testas: Perform regular functional tests as part of your overall fire alarm system testing schedule, typically monthly or annually, as required by local codes and NFPA 72. This includes verifying LED illumination and button functionality.
• Profesionalus aptarnavimas: All internal servicing and complex troubleshooting should be performed by certified fire alarm technicians.

7. Problemų sprendimas

Šiame skyriuje pateikiami pagrindiniai dažniausiai pasitaikančių problemų sprendimo veiksmai. Sudėtingesnėms problemoms spręsti kreipkitės į kvalifikuotą techninės priežiūros specialistą.

8. Specifikacijos

The following specifications apply to the Simplex 4100-9610 Remote Annunciator:

• Modelis: 4100-9610
• Prekinis ženklas: PAPRASTAS
• Dalies numeris: S41009610
• UPC: 742779297952
• Maitinimo šaltinis: Battery Powered (typically from main FACP)
• Signalizacijos tipas: Audible (local annunciator sounder)
• Stilius: Saugumas
• Prekių skaičius: 1 (vienetui)
• Gamintojas: PAPRASTAS

Note: Specifications are subject to change without notice. Refer to the latest product data sheets for the most current information.

9. Informacija apie garantiją

Simplex products are typically covered by a limited warranty against defects in materials and workmanship. The specific terms and duration of the warranty may vary based on the region and purchase agreement. Please retain your proof of purchase. For detailed warranty information, contact your authorized Simplex distributor or refer to the warranty statement provided at the time of purchase.

This warranty does not cover damage resulting from improper installation, misuse, unauthorized modification, or acts of nature.

10. Pagalba klientams

For technical assistance, troubleshooting beyond the scope of this manual, or to inquire about replacement parts, please contact your authorized Simplex service provider or the vendor from whom the product was purchased. Ensure you have the model number (4100-9610) and serial number (if applicable) of your annunciator ready when contacting support.

For general inquiries about Simplex products, visit the official Simplex websvetainėje arba susisiekite su klientų aptarnavimo skyriumi.