aigo AZ300 Mid Tower Computer Case User Manual

1. Įvadas

Thank you for choosing the aigo AZ300 Mid Tower Computer Case. This manual provides detailed instructions for the installation, operation, and maintenance of your new computer case. Please read this manual thoroughly before beginning installation to ensure proper setup and safe use.

Figure 1: aigo AZ300 Mid Tower Computer Case (White)

2. Saugos informacija

• Always disconnect the power supply from the wall outlet before installing or servicing any components inside the case.
• Atsargiai elkitės su grūdinto stiklo plokštėmis. Jos yra trapios ir gali sudužti, jei numestos arba patirtų smūgį.
• Avoid placing the case in areas with high humidity, extreme temperatures, or direct sunlight.
• Laikykite smulkias dalis ir varžtus vaikams nepasiekiamoje vietoje.
• Užtikrinkite tinkamą įžeminimą, kad išvengtumėte elektros pavojaus.

3. Produktas baigtasview

3.1 Priekinis įvesties / išvesties skydelis

Priekinis įvesties / išvesties skydelis suteikia patogią prieigą prie svarbiausių prievadų ir valdiklių.

2 pav.: Priekinio įvesties / išvesties skydelio išdėstymas

• C tipo prievadas: 1x USB Type-C port for modern connectivity.
• USB 2.0 prievadas: 1x USB 2.0 port for peripheral connections.
• USB 3.0 prievadas: 1x USB 3.0 port for high-speed data transfer.
• HD Audio (Headset/Microphone): Separate jacks for audio output and microphone input.
• Reset/LED Button: Resets the system or controls LED lighting (if applicable).
• Maitinimo mygtukas: Įjungia arba išjungia kompiuterį.

3.2 Internal Layout and Component Compatibility

The aigo AZ300 case offers a spacious interior designed for various component sizes and efficient cooling.

Figure 3: Internal Component and Cooling Layout

• Pagrindinės plokštės suderinamumas: Supports ATX, Micro-ATX, and ITX motherboards.
• Storage Drive Bays: 2x 2.5" SSD bays and 2x 3.5" HDD bays.
• GPU ilgis: Maximum GPU length of 400mm.
• PSU ilgis: Supports standard ATX power supplies up to 200mm.

4. Diegimo vadovas

4.1 Bylos parengimas

1. Padėkite dėklą ant lygaus, stabilaus paviršiaus.
2. Carefully remove the tempered glass side panels by unscrewing the thumb screws at each corner. Set the panels aside in a safe place.

Figure 4: Rear-Side View of Case

4.2 Pagrindinės plokštės montavimas

1. Install the I/O shield (if not pre-installed) into the rear opening of the case.
2. Align your ATX, Micro-ATX, or ITX motherboard with the standoffs inside the case. Ensure all standoffs match the motherboard's mounting holes.
3. Pritvirtinkite pagrindinę plokštę pridėtais varžtais.

Figure 5: Motherboard Mounting Areas

4.3 Maitinimo bloko (PSU) montavimas

1. Korpuso apačioje, gale, raskite maitinimo bloko tvirtinimo vietą.
2. Slide your ATX power supply into the designated slot.
3. Pritvirtinkite maitinimo bloką prie korpuso varžtais iš galo.

4.4 Atminties disko diegimas

1. 2.5 colio SSD diskai: Mount SSDs to the dedicated 2.5" bays, typically located behind the motherboard tray or in specific drive cages.
2. 3.5 colio kietieji diskai: Install HDDs into the 3.5" drive cages, usually found at the bottom front of the case.
3. Secure all drives with the appropriate screws.

Figure 6: Rear Internal View with Drive Bays

4.5 Išplėtimo plokštės (GPU) diegimas

1. Nuimkite reikiamus išplėtimo lizdų dangtelius nuo korpuso galo.
2. Įdėkite vaizdo plokštę arba kitas išplėtimo korteles į atitinkamus pagrindinės plokštės PCIe lizdus.
3. Pritvirtinkite korteles varžtais.

4.6 Aušinimo sistemos įrengimas

The aigo AZ300 supports flexible cooling configurations.

• Ventiliatoriaus palaikymas: Multiple 120mm fan mounting points are available at the top, front, and rear.
• Radiatoriaus palaikymas: Supports water coolers with radiators of 360mm, 240mm, and 120mm in designated areas.

4.7 Kabelių valdymas

Utilize the cable routing cutouts and tie-down points behind the motherboard tray to manage cables for improved airflow and aesthetics.

5. Operacija

After all components are installed and connected, reattach the tempered glass side panels. Connect your peripherals, monitor, and power cable. Press the power button on the front I/O panel to start your system.

Use the USB ports (Type-C, USB 2.0, USB 3.0) for connecting external devices. The HD Audio jacks are for headphones and microphones.

6. Priežiūra

Reguliarus kompiuterio komponentų aptarnavimas padeda užtikrinti optimalų našumą ir ilgaamžiškumą.

6.1 Dulkių filtro valymas

The aigo AZ300 case is equipped with dust filters to prevent dust buildup. Clean these filters periodically.

• Top Magnetic Dust Filter: Gently lift and remove the magnetic dust filter from the top panel. Clean it with compressed air or rinse with water (ensure it's completely dry before reattaching).
• PSU dulkių filtras: The dust filter for the power supply is located at the bottom of the case. Slide it out for cleaning.

Figure 7: Side Panel and Bottom Dust Filter Location

7. Problemų sprendimas

• Sistema neįsijungia: Ensure all power cables (24-pin ATX, 8-pin CPU, GPU power) are securely connected. Check that the power supply switch is in the 'ON' position. Verify front panel power button connection to the motherboard.
• Nėra ekrano: Confirm the monitor is connected to the graphics card (not the motherboard integrated graphics, unless no dedicated GPU is present). Reseat the graphics card and RAM modules.
• Perkaitimas: Ensure all case fans are spinning and oriented correctly for airflow (intake/exhaust). Clean dust filters and internal components. Verify CPU cooler installation.
• USB prievadai neveikia: Check that the USB headers from the front panel are correctly connected to the motherboard.

8. Specifikacijos

9. Garantija ir palaikymas

aigo strives to provide excellent customer service. If you encounter any quality issues with your aigo AZ300 computer case, please contact us directly. We will assist you with troubleshooting and resolution.

For support, please refer to the contact information provided with your purchase or visit the official aigo websvetainę.