Franke FSL 86 H XS

Franke FSL 86 H XS Built-in Electric Oven User Manual

Model: FSL 86 H XS (Article Code: 116.0609.446)

1. Įvadas

Thank you for choosing the Franke FSL 86 H XS Built-in Electric Oven. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your appliance. Please read these instructions carefully before using the oven and keep them for future reference.

Franke FSL 86 H XS Built-in Electric Oven

Figure 1: Franke FSL 86 H XS Built-in Electric Oven

2. Saugos informacija

Always adhere to the following safety guidelines to prevent accidents and ensure proper functioning of the appliance:

3. Sąranka ir diegimas

Proper installation is crucial for the oven's performance and safety. It is recommended that a qualified professional handles the installation.

3.1 Išpakavimas

Carefully remove the oven from its packaging. Inspect the appliance for any damage. Report any damage to your retailer immediately. Keep packaging materials out of reach of children.

3.2 Montavimo matmenys

The Franke FSL 86 H XS is designed for built-in installation. Refer to the diagram below for precise dimensions and clearances required for the cabinet opening.

Franke FSL 86 H XS Installation Dimensions

Figure 2: Installation dimensions for the Franke FSL 86 H XS oven. Ensure the cabinet opening meets these specifications for proper fit and ventilation.

3.3 Elektros prijungimas

The electrical connection must comply with local wiring regulations. The appliance must be connected to the mains supply via a suitable switch that provides full disconnection from the supply. The power cable should not be bent or compressed. Ensure the appliance is properly earthed.

4. Naudojimo instrukcijos

Your Franke FSL 86 H XS oven features intuitive controls for various cooking functions.

4.1 Valdymo skydas baigtasview

The oven is equipped with push-pull knobs and a digital display for easy operation.

Franke FSL 86 H XS Control Panel

Figure 3: Close-up of the control panel with push-pull knobs and digital display.

4.2 Setting a Cooking Program

  1. Pasukite Funkcijos rankenėlė norėdami pasirinkti norimą gaminimo režimą.
  2. Pasukite Temperatūros rankenėlė norint nustatyti reikiamą temperatūrą.
  3. To set a cooking duration, press the timer button and use the +/- buttons to adjust the time. The oven will automatically switch off once the set time has elapsed.
  4. Preheat the oven if required by your recipe.

4.3 Orkaitės funkcijos

5. Priežiūra ir valymas

Reguliarus valymas ir priežiūra prailgins jūsų orkaitės tarnavimo laiką ir užtikrins optimalų veikimą.

5.1 Bendras valymas

5.2 Garinio valymo funkcija

This oven features a steam cleaning function to assist in loosening stubborn food residues:

  1. Pour approximately 200ml of water into the designated cavity at the bottom of the oven.
  2. Select the steam cleaning function (refer to your control panel for the specific symbol).
  3. Run the program for the recommended duration (usually around 30 minutes).
  4. Programai pasibaigus ir orkaitei atvėsus, minkštu skudurėliu nuvalykite suminkštėjusius likučius.

6. Problemų sprendimas

Prieš kreipdamiesi į klientų aptarnavimo tarnybą, patikrinkite šias dažniausiai pasitaikančias problemas:

ProblemaGalima priežastisSprendimas
Orkaitė neįkaistaNo power supply; incorrect settings; faulty heating element.Check circuit breaker; verify function/temperature settings; contact service if problem persists.
Skaitmeninis ekranas neveikiaPower interruption; electronic fault.Check power supply; reset oven by turning off/on at the mains; contact service.
Maistas nekepa tolygiaiNeteisinga grotelių padėtis; perkrauta orkaitė; ne iki galo uždarytos durelės.Use recommended rack position; avoid overcrowding; ensure door is sealed.

7. Specifikacijos

Detailed technical specifications for the Franke FSL 86 H XS oven:

8. Garantija ir palaikymas

Your Franke FSL 86 H XS oven comes with a manufacturer's warranty. Please refer to the warranty card included with your purchase for specific terms and conditions, including the warranty period and coverage details.

8.1 Pagalba klientams

For technical assistance, spare parts, or to schedule a service appointment, please contact Franke customer support. You can find contact details on the Franke official websvetainėje arba savo produkto dokumentacijoje.

When contacting support, please have your product model number (FSL 86 H XS) and article code (116.0609.446) ready.

Susiję dokumentai - FSL 86 H XS

Preview „Franke“ kriauklės: pasauliniai kontaktai ir montavimo vadovas
Raskite „Franke“ virtuvės kriauklių kontaktinę informaciją visame pasaulyje ir gaukite įrengimo bei priežiūros instrukcijas, įskaitant „Franke Maris MRX 110-40“ gaminio informaciją.
Preview Franke kriauklių montavimo ir naudojimo instrukcija
Išsamus „Franke“ kriauklių montavimo ir naudojimo vadovas, apimantis įvairius modelius ir montavimo tipus. Pateikiamos saugos gairės, priežiūros instrukcijos ir pasaulinė kontaktinė informacija.
Preview „Franke“ mikrobangų krosnelės naudotojo vadovas: FMW 20 SMP G XS, FSL 20 MW XS, FSL 20 MW BK
„Franke FMW 20 SMP G XS“, „FSL 20 MW XS“ ir „FSL 20 MW BK“ mikrobangų krosnelių įrengimo ir naudojimo instrukcija. Apima saugos, naudojimo, įrengimo, valymo ir trikčių šalinimo informaciją.
Preview Franke MYX210-70B Mythos virtuvės kriauklė - matmenys ir montavimo vadovas
Išsami informacija ir montavimo vadovas apie „Franke MYX210-70B Mythos“ virtuvės plautuvę, įskaitant matmenis, savybes ir galimus priedus. Sužinokite apie jos montavimą ant viršaus / įleidžiamą į vandenį, dubens dydį ir medžiagą.
Preview Franke HWS serijos rankų plovimo mašina Basin Diegimo vadovas
Išsamios „Franke HWS“ serijos rankų plovimo mašinos įrengimo, naudojimo ir priežiūros instrukcijosasins. Išsami informacija apima medžiagų savybes, nanodangos technologiją ir konkrečius modelio matmenis.
Preview Franke Specialist serijos nerūdijančio plieno po žeme montuojamos kriauklės
Išsamus „Franke Specialist“ serijos nerūdijančio plieno po žeme montuojamų kriauklių vadovas, kuriame pateikiamos išsamios gaminių specifikacijos, savybės, privalumai ir priedai. Vadove aprašomos vieno ir kelių dubenų konfigūracijos, įskaitant „Peak“, „Kubus“, „Planar“, „Oceania“, „Ariane“, „Eisinger“, „Galassia“, „Aurora“, „Regatta“ ir „Steel Queen“ serijų modelius.