PowerSmart 42V 2A Charger for 36V Batteries User Manual

1. Įvadas

This manual provides essential information for the safe and efficient use of your PowerSmart 42V 2A charger. This charger is specifically designed for 36V batteries equipped with a 5-pin SVD plastic connector, commonly found in Phylion and Joycube battery systems. Please read these instructions carefully before operating the charger to ensure proper function and to prevent damage or injury.

2. Svarbios saugos instrukcijos

• Perskaitykite visas instrukcijas: Prieš naudodami įkroviklį, perskaitykite visas instrukcijas ir įspėjamuosius ženklus ant įkroviklio, akumuliatoriaus ir gaminio, kuriame naudojamas akumuliatorius.
• Tik patalpų naudojimas: Saugokite įkroviklį nuo lietaus ar drėgmės. Jis skirtas naudoti tik patalpose.
• Tinkamas ttage: Ensure the charger is connected to a power supply within the specified input voltage diapazonas (100 V–240 V kintamoji srovė).
• Correct connector: This charger is only compatible with 36V batteries that have a 5-pin plastic SVD connector. Do not attempt to use it with metal connectors or other pin configurations.
• Venkite trumpųjų jungimų: Nesujunkite išvesties gnybtų trumpai.
• Vėdinimas: Užtikrinkite tinkamą vėdinimą aplink įkroviklį veikimo metu. Neuždenkite įkroviklio.
• Atjunkite, kai nenaudojate: Disconnect the charger from the power outlet when not in use or before cleaning.
• Pažeisti komponentai: Do not operate the charger if it has been dropped, damaged, or if the cord or plug is damaged. Contact customer support for assistance.
• Vaikai ir augintiniai: Įkroviklį laikykite vaikams ir naminiams gyvūnėliams nepasiekiamoje vietoje.

3. Produkto ypatybės

• Suderinamumas: Specifically designed for 36V batteries with a 5-pin plastic SVD connector.
• Įvesties tomastage: 100V-240V AC, 50/60Hz.
• Išėjimas ttage: 42V DC.
• Išėjimo srovė: 2.0A.
• Galia: 84W.
• Jungties tipas: 5-pin circular plastic plug.
• LED indikatorius: Red for charging, Green for fully charged or disconnected.

4. Setup and Connector Verification

Before connecting the charger, it is crucial to verify that your battery's charging port is compatible with the 5-pin plastic SVD connector. This charger is not compatible with metal plugs or other pin configurations.

Image: Ensure your battery has a plastic 5-pin DC socket, not a metal one.

The charger features a 5-pin circular plastic connector. Please compare it carefully with your battery's charging port.

Image: PowerSmart 42V 2A charger with its 5-pin plastic connector.

This charger is specifically designed for Phylion and Joycube 36V batteries that utilize this specific 5-pin SVD plastic connector.

Image: Correct connection of the 5-pin charger plug.

Pastaba: This charger is not compatible with NEOMOUV brand bikes fitted with Greenway 36V batteries, nor can it replace chargers with model numbers SHC-8100LC, STC-8129LC, and LBC100201.

5. Naudojimo instrukcijos (įkrovimo procesas)

1. Prijunkite prie akumuliatoriaus: First, connect the 5-pin charger plug securely into the charging port of your 36V battery.
2. Prijunkite prie maitinimo: Plug the charger's AC power cord into a standard 100V-240V wall outlet.
3. Monitoriaus LED indikatorius:
   • A RAUDONA LED light indicates that the battery is currently charging.
   • A ŽALIA LED light indicates that the battery is fully charged or the charger is disconnected from the battery.
4. Įkrovimo laikas: Charging time will vary depending on the battery's capacity and its current charge level.
5. Atsijungti: Once the LED indicator turns green, the battery is fully charged. Disconnect the charger from the wall outlet first, then disconnect the charger plug from the battery.

Svarbi pastaba apie tūrįtage: The charger's output voltage (42V) is intentionally higher than the battery's nominal voltage (36V). This is normal and necessary for a complete charge cycle. Do not be alarmed by this difference.

Image: Charger output voltage yra didesnis nei akumuliatoriaus talpatage for full charge.

6. Priežiūra

• Valymas: Disconnect the charger from the power supply and battery before cleaning. Use a dry, soft cloth to wipe the exterior. Do not use liquid cleaners or solvents.
• Saugykla: Nenaudojamą įkroviklį laikykite vėsioje, sausoje vietoje. Venkite ekstremalių temperatūrų ir drėgmės.
• Kabelio priežiūra: Do not pull the cable forcefully or wrap it too tightly around the charger. Inspect the cable and plug regularly for any signs of damage.

7. Problemų sprendimas

If the charger is not functioning as expected, please check the following:

• Nėra LED šviesos:
  • Įsitikinkite, kad įkroviklis yra tvirtai prijungtas prie veikiančio sieninio lizdo.
  • Verify the battery is properly connected to the charger.
  • Patikrinkite, ar sieninis lizdas veikia, prijungdami kitą įrenginį.
• LED remains green when connected to battery:
  • Baterija jau gali būti visiškai įkrauta.
  • Ensure the battery's charging port and the charger's plug are clean and free of debris.
  • Confirm that the battery is a 36V battery with a 5-pin plastic SVD connector.
• Charger gets warm during use:
  • It is normal for the charger to become warm during operation. Ensure it has adequate ventilation and is not covered.
  • If the charger becomes excessively hot or emits smoke/unusual odors, immediately disconnect it from power and battery and cease use.

If these steps do not resolve the issue, please contact PowerSmart customer support.

8. Specifikacijos

Image: Charger label with detailed specifications.

9. Garantija ir palaikymas

For warranty information or technical support, please refer to the documentation included with your purchase or contact PowerSmart customer service directly. Please have your product model number (42V 2A or SSLC084V42M-01) and purchase details available when contacting support.

Manufacturer: PowerSmart
Address: ID, 6F, Ren Road, Donggang Town, Xichen District, Wuxi City, Jiangsu P.R. China