MAIMEIMI GPS Speedometer 85mm (3-3/8") Instruction Manual

1. Įvadas

This manual provides detailed instructions for the installation, operation, and maintenance of your MAIMEIMI 85mm GPS Speedometer. Designed for a wide range of applications including cars, tractors, trucks, boats, and marine vessels, this speedometer features a clear TFT screen, IP67 waterproof rating, and a wide 9-32VDC working voltage range. Please read this manual thoroughly before installation and use to ensure proper function and safety.

2. Pakuotės turinys

Atidarę pakuotę, patikrinkite, ar yra visi šie daiktai:

• 1 x GPS Speedometer (85mm / 3-3/8")
• 1 x GPS Antenna (3-meter cable length)
• 1 x naudojimo instrukcija

Image: Contents of the MAIMEIMI GPS Speedometer package.

3. Produkto ypatybės

• TFT Screen Display: Provides clear visibility of speed, odometer, trip meter, battery voltage, and course over ground (COG).
• Platus ttage Diapazonas: Operates on 9-32VDC, suitable for various vehicle types.
• Waterproof & Anti-fogging: IP67 rated for water and fog resistance, ensuring reliable performance in challenging environments.
• Multiple Unit Switching: Easily switch between kilometers per hour (km/h), miles per hour (mph), and knots (rounded to one decimal).
• GPS signalo gavimas: Initial signal acquisition takes approximately 30 seconds, with faster connections under clear skies.
• Odometer & Trip Meter: Odometer (0-999999km) is adjustable via the back button. Trip meter (0-999.9km) resets when power is off.
• Orientation Pointer: Displays Course Over Ground (COG) for directional awareness.

Image: Detailed display information of the GPS Speedometer.

Image: The speedometer undergoing a waterproof test.

4. Sąranka ir diegimas

Follow these steps for proper installation of your GPS Speedometer:

1. Paruoškite tvirtinimo angą: Open an 85mm (3 3/8") diameter hole in your panel. Ensure there is a 55mm (2 3/16") depth clearance behind the panel for the gauge body.
2. Insert the Gauge: Carefully place the speedometer into the prepared hole.
3. Pritvirtinkite matuoklį: Use the provided mounting ring to screw down and secure the gauge firmly in place.
4. Prijunkite laidus:
   • Connect the Black wire to Ground (-).
   • Connect the Red wire to 9-30VDC power supply.
5. Prijunkite GPS anteną: Plug the GPS antenna into the designated port on the back of the speedometer. The GPS antenna can be optionally mounted using 3M double-sided tape.

Image: Front and back dimensions of the GPS Speedometer.

Image: Basic wiring diagram for the speedometer.

Image: Step-by-step installation guide for the gauge.

5. Naudojimo instrukcijos

Once installed and powered, the speedometer will begin searching for a GPS signal. After acquiring a signal, it will display speed and other data.

• Įrenginio perjungimas: To change the speed unit (km/h, mph, or knots), press the button located on the back of the speedometer. The unit will cycle through the options and save automatically.
• Odometer Adjustment: The odometer value can be adjusted using the button on the back.
• Kelionės matuoklis: The trip meter automatically resets to zero when the power is turned off.

Image: Display showing selectable speed units.

6. Priežiūra

To ensure the longevity and optimal performance of your GPS Speedometer, follow these general maintenance guidelines:

• Regularly clean the screen and bezel with a soft, damp audinys. Venkite abrazyvinių valiklių.
• Įsitikinkite, kad visos laidų jungtys yra tvirtos ir be korozijos.
• Periodically check the GPS antenna for any damage or obstruction to maintain signal integrity.
• While the unit is IP67 waterproof, avoid prolonged submersion or high-pressure water jets.

7. Problemų sprendimas

If you encounter any issues with your GPS Speedometer, consider the following common solutions:

• Nėra GPS signalo: Įsitikinkite, kad GPS antena turi laisvą view of the sky. Obstructions can block the signal. Allow up to 30 seconds for initial signal acquisition.
• Neteisingas greičio rodmuo: Verify that the correct unit (km/h, mph, knots) is selected. If the issue persists, ensure the GPS antenna is securely connected.
• Ekranas neveikia: Check all power connections to ensure they are secure and receiving the correct voltage (9-32VDC).
• Mygtukai nereaguoja: Ensure the unit is clean and free from debris around the buttons.

Jei po šių veiksmų problemos išlieka, kreipkitės į klientų aptarnavimo tarnybą.

8. Specifikacijos

9. Garantija ir palaikymas

For warranty information or technical support, please refer to the contact details provided with your purchase documentation or visit the official MAIMEIMI websvetainėje. Išsaugokite pirkimo įrodymą, jei prireiktų pateikti garantinį ieškinį.