SINOTIMER TM618 -7 Days Programmable Weekly Timer Module

1. Baigėsiview

The SINOTIMER TM618 timer module is designed to automatically control the power supply to various electrical apparatus, such as streetlights, neon signs, billboards, and other appliances, based on a preset time schedule. This digital timer switch features a rechargeable internal battery to maintain program settings during power outages.

1.1 pav.: priekis view of the TM618 Timer Module.

2. Pagrindinės savybės

• Kompaktiškas ir erdvę taupantis dizainas.
• Engineered with advanced digital timing technology.
• High functionality for precise time control.
• Built-in rechargeable battery for program retention.
• Multiple ON/OFF programs for weekly scheduling.

3. Sąranka ir diegimas

3.1. Laidų schema

Proper wiring is crucial for the safe and correct operation of the TM618 timer module. Refer to the diagram below for connection details. Ensure power is disconnected before performing any wiring.

Figure 3.1: Wiring Terminals and Specifications.

• Input (200-250VAC): Connect your main power supply to terminals 1 and 2.
• Output (16 AMP / 250VAC, 20 AMP @30 VDC): Terminals 3, 4, and 5 are for the controlled output. Terminal 3 is common, Terminal 4 is normally open (NO), and Terminal 5 is normally closed (NC). Connect your load to the appropriate terminals based on your application (e.g., between 3 and 4 for normally off, turning on when timed).

3.2. Pradinis įjungimas ir akumuliatoriaus įkrovimas

Upon initial power-up, the timer's internal rechargeable battery (40mAh) will begin charging. This battery saves your programmed settings during power interruptions. Allow the unit to be powered for at least 30 minutes for the battery to gain sufficient charge before programming or disconnecting power.

Figure 3.2: Internal 40mAh Rechargeable Battery.

Figure 3.3: TM618 Operating Voltage (220V AC shown).

4. Naudojimo instrukcijos

The TM618 timer allows for precise control with up to 16 ON/OFF programs per day or week. The buttons on the front panel are used for setting the time and programs.

Figure 4.1: Timer Module with Manual.

4.1. Dabartinio laiko nustatymas

1. Paspauskite LAIKRODIS mygtuką ir laikykite jį.
2. Laikant LAIKRODIS, paspauskite SAVAITĖ norėdami nustatyti dabartinę savaitės dieną.
3. Laikant LAIKRODIS, paspauskite VALANDA norėdami nustatyti dabartinę valandą.
4. Laikant LAIKRODIS, paspauskite MIN norėdami nustatyti dabartinę minutę.
5. Atleiskite LAIKRODIS mygtuką. Laikas dabar nustatytas.

4.2. Įjungimo/išjungimo laikų programavimas

Laikmatis palaiko iki 16 įjungimo/išjungimo programų. Kiekviena programa susideda iš įjungimo laiko ir išjungimo laiko.

1. Paspauskite PROG mygtuką vieną kartą. Ekrane bus rodoma „1 ON“.
2. Paspauskite SAVAITĖ to select the day(s) for this program (e.g., MO, TU, WE, TH, FR, SA, SU, or combinations like MO-FR, SA-SU, MO-SA, etc.).
3. Paspauskite VALANDA , kad nustatytumėte norimą ĮJUNGIMO valandą.
4. Paspauskite MIN , kad nustatytumėte norimą įjungimo minutę.
5. Paspauskite PROG dar kartą. Ekrane bus rodoma „1 OFF“.
6. Pakartokite 2–4 veiksmus, kad nustatytumėte norimą (-as) šios programos išjungimo dieną (-as), valandą ir minutę.
7. Paspauskite PROG to advance to the next program ("2 ON") or to exit programming mode if no more programs are needed.
8. To clear a program, press PRISIMINTI kol viewing the specific ON or OFF program you wish to clear.

4.3. Rankinis nepaisymas

Paspauskite VADOVAS mygtuką, kad perjungtumėte skirtingus veikimo režimus:

• AUTOMATINIS ĮJUNGTAS: The timer is currently ON and will follow the programmed schedule.
• AUTOMATINIS IŠJUNGTAS: The timer is currently OFF and will follow the programmed schedule.
• ĮJUNGTA: The timer is forced ON, overriding any programs.
• IŠJUNGTA: The timer is forced OFF, overriding any programs.

4.4. Recall Function

The PRISIMINTI button (often marked 'R' or 'RESET') is used to clear specific program settings or to reset the timer. A small pinhole button (R) is typically used for a full reset, which clears all programs and resets the time.

5. Priežiūra

5.1. Akumuliatoriaus priežiūra

The TM618 features a built-in rechargeable battery. To ensure its longevity and proper function, keep the timer connected to power for regular charging. If the timer is stored for extended periods without power, the battery may discharge, requiring a full charge upon reconnection.

5.2. Valymas

Clean the exterior of the timer module with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these can damage the plastic casing or display. Ensure no liquids enter the device.

6. Problemų sprendimas

• Ekranas tuščias: Check power connections. Ensure the unit has been powered for at least 30 minutes to charge the internal battery.
• Programs not executing: Verify that the current time is set correctly. Check that the timer is in "AUTO ON" or "AUTO OFF" mode, not forced ON/OFF. Review your programmed ON/OFF times for accuracy.
• Timer not responding to buttons: Perform a full reset using the small 'R' pinhole button. If issues persist, ensure proper power supply.

7. Specifikacijos

7.1. Matmenys

Figure 7.1: Front Dimensions.

Figure 7.2: Side Dimensions.

8. Garantija ir palaikymas

For information regarding product warranty, technical support, or service, please refer to the documentation provided with your purchase or contact your retailer. Keep your proof of purchase for any warranty claims.