1. Įvadas ir pabaigaview
The RCF ART 935-A is a high-performance digital 2-way active speaker designed for intensive audio applications. It combines advanced transducer technology with a powerful amplifier to deliver exceptional sound quality and versatility.
1.1 pav.: priekis view of the RCF ART 935-A active speaker, showcasing its robust black enclosure and front grille.
Pagrindinės funkcijos:
- Up to 133 dB Sound Pressure Level
- 2100W Class-D Bi-Ampsušvelninimas
- 45-20000 Hz linear frequency response
- 3" Titanium/Neodymium Compression Driver
- 15" Woofer
- FiRPHASE zero degrees phase technology
- Bass Motion Control woofer excursion management
Figure 1.2: Close-up of the speaker's internal components, highlighting the 15-inch woofer and the 3-inch compression driver.
The ART 935-A is suitable for use as a stand-alone FOH system speaker, satellite with a subwoofer, stage monitor, or flown installation, offering high performance and reliability in a compact enclosure.
2. Saugos informacija
Please read and understand all safety instructions before operating the RCF ART 935-A speaker. Retain this manual for future reference.
- Elektros sauga: Šiame įrenginyje yra didelės talpostage. To prevent electrical shock, do not remove the cover. There are no user-serviceable parts inside. Refer all servicing to qualified service personnel.
- Maitinimo šaltinis: Connect the speaker only to a power supply of the type described in this manual and marked on the unit.
- Maitinimo laidas: Saugokite maitinimo laidą, kad ant jo neužeitų ar nesuspaustų, ypač prie kištukų, patogių lizdų ir toje vietoje, kur jie išeina iš aparato.
- Vėdinimas: Užtikrinkite tinkamą ventiliaciją aplink garsiakalbį. Neužblokuokite jokių ventiliacijos angų.
- Vieta: Place the speaker on a stable, level surface or mount it securely using appropriate rigging hardware. Avoid placing near heat sources or in direct sunlight.
- Klausos apsauga: Prolonged exposure to high sound pressure levels can cause permanent hearing damage. Use appropriate hearing protection when operating the speaker at high volumes.
- Drėgmė: Do not expose the speaker to rain or moisture. Do not use near water.
⚠ CAUTION: TO PREVENT ELECTRICAL SHOCK DO NOT REMOVE COVER.
3. Sąranka
Follow these steps to set up your RCF ART 935-A speaker:
3.1 Išpakavimas
Carefully remove the speaker from its packaging. Inspect the unit for any signs of damage during transit. The box should contain: RCF ART 935-A Digital 2-Way Active Speaker, Power Cord, and this User Manual.
3.2 Fizinis išdėstymas ir montavimas
The ART 935-A is designed for versatile placement. It can be used on a pole, flown, wall-mounted, or truss-mounted. Ensure any mounting hardware used is rated for the speaker's weight (approximately 53.2 pounds / 24.2 kg).
3.1 pav.: šonas view of the speaker, illustrating its ergonomic design for handling and placement.
3.2 pav. Apačia view, highlighting the integrated pole mount for stand placement.
3.3 Jungtys
Locate the input/output panel on the rear of the speaker.
Figure 3.3: Rear panel of the speaker, displaying the balanced input/link, volume control, and preset buttons.
- Maitinimo jungtis: Prijunkite pridedamą maitinimo laidą prie kintamosios srovės įvado galiniame skydelyje, o tada – prie tinkamo maitinimo lizdo.
- Garso įvestis: Use an XLR cable to connect your audio source (mixer, audio interface, etc.) to the "BALANCED INPUT/LINK" XLR input.
- Audio Link (Daisy Chain): If connecting multiple speakers, use an XLR cable from the "BALANCED INPUT/LINK" XLR output to the input of the next speaker.
4. Naudojimo instrukcijos
Once the speaker is set up, you can begin operation.
4.1 pav. Išsamus view of the control panel, including the volume control and preset selection.
4.1 Valdikliai ir indikatoriai
- GARSUMO rankenėlė: Adjusts the overall output level of the speaker. Turn counter-clockwise for minimum volume (-∞) and clockwise for maximum volume (MAX).
- PRESETS Button: Cycles through different audio equalization presets.
- LINIJINIS: Flat frequency response, suitable for general use or when external EQ is applied.
- PAdidinti: Enhances bass and treble frequencies, often used for music playback.
- STAGE: Optimized for stage monitorių taikymams, mažinant žemo dažnio kaupimąsi.
- SIGNALO šviesos diodas: Šviečia, kai įvestyje yra garso signalas.
- PERKROVIMO LED: Illuminates when the input signal is too high, indicating potential clipping. Reduce the input level to prevent distortion.
4.2 Įjungimas / išjungimas
- Ensure the VOLUME knob is set to minimum (-∞).
- Prijunkite maitinimo laidą.
- Pasukite maitinimo jungiklį į padėtį „ĮJUNGTA“.
- Gradually increase the VOLUME to the desired level.
- To power off, reduce the VOLUME to minimum, then flip the power switch to "OFF".
5. Priežiūra
Proper maintenance ensures the longevity and optimal performance of your RCF ART 935-A speaker.
- Valymas: Use a soft, dry cloth to clean the exterior of the speaker. Do not use abrasive cleaners, solvents, or waxes. For the grille, a soft brush or vacuum cleaner can be used to remove dust.
- Patikra: Periodically check all cables for damage. Ensure all connections are secure.
- Saugykla: When not in use for extended periods, store the speaker in a dry, cool environment, ideally in its original packaging or a protective case.
- Nėra naudotojo aptarnaujamų dalių: Do not attempt to open the speaker enclosure. All internal servicing must be performed by qualified RCF service personnel.
6. Problemų sprendimas
If you encounter issues with your RCF ART 935-A speaker, refer to the following common problems and solutions:
| Problema | Galima priežastis | Sprendimas |
|---|---|---|
| Nėra garso išvesties |
|
|
| Distorted sound / OVERLOAD LED lit |
|
|
| Garsiakalbis neįsijungia |
|
|
For issues not listed here, or if the problem persists after attempting the solutions, please contact RCF customer support or an authorized service center.
7. Specifikacijos
Detailed technical specifications for the RCF ART 935-A Digital 2-Way Active Speaker:
| Funkcija | Specifikacija |
|---|---|
| Modelio pavadinimas | ART935-A |
| Garsiakalbio tipas | 2-Way Active Speaker (Satellite, Woofer) |
| Ampsušvelninimas | 2100W Class-D Bi-Amplification (Peak Power) |
| Žemų dažnių garsiakalbio skersmuo | 15 colių |
| Aukštų dažnių garsiakalbio skersmuo | 3 Inches (Titanium/Neodymium Compression Driver) |
| Dažnio atsakas | 45-20000 Hz (linear) |
| Sound Pressure Level (Max) | Iki 133 dB |
| Ryšio technologija | XLR (Balanced Input/Link) |
| Kontrolės metodas | Voice (Presets) |
| Spalva | Juoda |
| Gaminio matmenys (P x A) | 16.34 colio pločio x 28.23 colio aukščio |
| Prekės svoris | 53.2 svaro (24.2 kilogramo) |
| Montavimo tipas | Wall Mount, Pole Mount (multiple rigging points) |
| Įtraukti komponentai | RCF ART 935-A Digital 2-Way Active Speaker, Power Cord |
| Ypatingos savybės | FiRPHASE zero degrees phase technology, Bass Motion Control woofer excursion management |
8. Garantija ir palaikymas
The RCF ART 935-A Digital 2-Way Active Speaker comes with a RCF 3 Year Limited WarrantyPrašome išsaugoti pirkimo įrodymą garantiniams reikalavimams.
For technical support, service, or warranty inquiries, please contact RCF customer service or visit the official RCF website. Ensure you have your product model number (ART935-A) and serial number (if applicable, e.g., UDXU01335) ready when contacting support.
The serial number UDXU01335 is located on the rear panel of the speaker, near the input/output connections.
