Įvadas
This manual provides essential instructions for the safe and efficient operation, maintenance, and troubleshooting of your Tolsen 20in Gasoline Chain Saw (Model TLSN-79614). Please read this manual thoroughly before operating the chain saw to ensure proper use and to prevent injury or damage.
The Tolsen 20in Gasoline Chain Saw is designed for cutting wood, such as felling small trees, limbing, and bucking. It features a powerful 52cc 2-stroke engine with a rated power of 2000W (2.6Hp) and a 20-inch cutting bar.
1 paveikslas: Tolsen 20in Gasoline Chain Saw. This image shows the complete chain saw assembly, highlighting its robust design and 20-inch bar.
Bendrieji saugos įspėjimai
- Visada dėvėkite tinkamas asmenines apsaugos priemones (AAP), įskaitant apsauginius akinius, klausos apsaugos priemones, pirštines ir tvirtą avalynę.
- Never operate the chain saw when fatigued, under the influence of alcohol, drugs, or medication.
- Keep bystanders, children, and animals at a safe distance from the work area.
- Inspect the chain saw before each use for any damage, loose parts, or fuel leaks.
- Ensure the chain brake is functional and engaged when starting the engine or moving between cuts.
Sąranka ir surinkimas
1. Išpakavimas ir komponentų patikrinimas
Carefully remove all components from the packaging. Verify that all parts are present and undamaged. Refer to the parts diagram (not included in this text, but typically found in a physical manual) to identify each component.
2. Kuro mišinio paruošimas
This chain saw uses a 2-stroke engine and requires a specific fuel-to-oil mixture. Use high-quality unleaded gasoline and a premium 2-stroke engine oil designed for air-cooled engines. Refer to the engine manufacturer's recommendations for the exact mixing ratio (typically 25:1 or 50:1, depending on oil type). The fuel tank capacity is 560ml.
- Mix fuel in a separate, approved fuel container.
- Prieš pildami į degalų baką, gerai suplakite mišinį.
- Always refuel in a well-ventilated area with the engine off and cool.
3. Grandinės ir kreipiančiosios juostos montavimas
- Įsitikinkite, kad grandinės stabdys įjungtas.
- Nuimkite šoninį dangtelį, atlaisvindami veržles.
- Place the guide bar onto the studs, ensuring the chain tensioner pin aligns with the hole in the bar.
- Carefully fit the saw chain around the sprocket and into the guide bar groove. Ensure the cutting edges of the chain are facing the correct direction. The chain pitch is 3/8in (0.325in).
- Uždėkite šoninį dangtelį ir ranka priveržkite veržles.
- Adjust chain tension: The chain should be snug against the guide bar but still able to be pulled freely by hand. There should be no slack on the underside of the bar.
- Tvirtai priveržkite šoninio dangtelio veržles.
4. Bar and Chain Oil
Fill the oil tank (capacity 260ml) with high-quality bar and chain oil. This oil lubricates the chain and guide bar during operation, reducing friction and wear. Do not use engine oil or waste oil.
Naudojimo instrukcijos
1. Variklio užvedimas
The Tolsen chain saw features an easy starting system with an automatic choke.
- Place the chain saw on a firm, flat surface. Ensure the chain brake is engaged.
- Kelis kartus paspauskite degalų užvedimo lemputę, kol pamatysite degalų.
- Droselio svirtį nustatykite į padėtį „FULL CHOKE“ (pilnas droselis).
- Tvirtai ir tolygiai traukite starterio virvę, kol variklis užsives (paprastai užtrunka kelis kartus).
- Once the engine fires, immediately push the choke lever to the "HALF CHOKE" or "RUN" position.
- Dar kartą traukite starterio virvę, kol variklis užsives ir veiks sklandžiai.
- Allow the engine to warm up for a few moments at idling speed (3200rpm ±5%).
- Prieš pradėdami pjovimo darbus, išjunkite grandinės stabdį.
2. Operating Safety Features
- Safety Throttle Lever: This lever prevents accidental acceleration. It must be depressed along with the main throttle trigger to engage the engine.
- Rapid Reaction Chain Brake: The chain brake is a crucial safety device designed to stop the chain instantly in the event of kickback or other emergencies. Always ensure it is functional before use.
3. Pjovimo būdai
Always maintain a firm grip with both hands on the chain saw handles. Stand with your feet apart for good balance. Plan your cuts to avoid kickback and ensure the tree or limb falls in the intended direction.
2 paveikslas: Tolsen 20in Gasoline Chain Saw positioned for operation. This image illustrates the chain saw ready for use on the ground, demonstrating its practical application.
- Kirtimas: Involves making a notch cut and a felling cut to direct the tree's fall. Requires careful planning and assessment of the tree's lean and surrounding area.
- Galūnės: Removing branches from a felled tree. Work from the base of the tree towards the top, cutting smaller branches first.
- Atsukimas: Cutting a felled tree into sections. Support the log to prevent pinching the chain.
WARNING: Be aware of kickback. Kickback occurs when the moving chain at the tip of the guide bar contacts an object, or when the wood closes in and pinches the saw chain in the cut. This can cause a rapid, uncontrolled upward and backward movement of the guide bar towards the operator.
Priežiūra
Regular maintenance ensures the longevity and safe operation of your chain saw. Always ensure the engine is off and cool, and the spark plug cap is disconnected before performing any maintenance.
1. Oro filtro valymas
The chain saw is equipped with a long-life air filter that can be cleaned repeatedly. A dirty air filter reduces engine performance and increases fuel consumption.
- Nuimkite oro filtro dangtelį.
- Carefully remove the air filter element.
- Clean the filter by tapping it gently or using compressed air. For heavily soiled filters, wash with warm soapy water, rinse thoroughly, and allow to dry completely before reinstallation.
- Reinstall the dry air filter and secure the cover.
2. Chain Sharpening and Tension
- Galandimas: Aštri grandinė yra labai svarbi efektyviam ir saugiam pjovimui. Reguliariai galąskite grandinę apvaliu file of the correct diameter for the chain pitch (3/8in or 0.325in). Follow the manufacturer's recommended sharpening angles.
- Įtampa: Check chain tension frequently. A properly tensioned chain should be snug against the guide bar but still allow you to pull it around the bar by hand. Adjust as needed.
3. Uždegimo žvakių patikra
Inspect the spark plug periodically. Clean any carbon deposits and check the electrode gap. Replace the spark plug if it is fouled or worn.
4. Bendras valymas
After each use, clean the chain saw thoroughly. Remove sawdust, debris, and oil residue from the engine fins, air intake, and around the chain and guide bar. This prevents overheating and ensures proper operation.
Trikčių šalinimas
This section addresses common issues you might encounter with your Tolsen chain saw.
| Problema | Galima priežastis | Sprendimas |
|---|---|---|
| Variklis neužsiveda | Nėra degalų arba netinkamas degalų mišinys Droselis netinkamai nustatytas Uždegimo žvakė užteršta arba sugedusi Įjungtas grandinės stabdys | Patikrinkite degalų lygį ir mišinį Sureguliuokite droselio svirtį Išvalykite arba pakeiskite uždegimo žvakę Išjunkite grandinės stabdį |
| Variklis veikia, bet grandinė nejuda | Įjungtas grandinės stabdys Sankabos problema Užstrigo grandinė | Išjunkite grandinės stabdį Pasikonsultuokite su kvalifikuotu techninės priežiūros specialistu Clear any debris from around the chain and bar |
| Prastas pjovimo našumas | Nuobodu grandinėlė Netinkamas grandinės įtempimas Insufficient bar and chain oil | Galąsti grandinę Sureguliuokite grandinės įtempimą Fill oil tank with bar and chain oil |
| Variklis perkaista | Nešvarus oro filtras Blocked cooling fins Netinkamas kuro mišinys | Išvalykite oro filtrą Nuvalykite aušinimo pelekus Ensure correct fuel-to-oil ratio |
If you encounter problems not listed here or if solutions do not resolve the issue, please contact Tolsen customer support or a qualified service technician.
Specifikacijos
| Funkcija | Detalė |
|---|---|
| Prekės ženklas | Tolsenas |
| Modelio numeris | TLSN-79614 |
| Variklio talpa | 52cc |
| Variklio tipas | Powerful 2-stroke engine |
| Nominali galia | 2000W / 2.6Hp |
| Tuščiosios eigos greitis | 3200 aps./min. ±5 % |
| Maks. Pjovimo skersmuo | 500mm (20in) |
| Grandinės žingsnis | 3/8in (0.325in) |
| Kuro bako talpa | 560 ml |
| Alyvos bako talpa | 260 ml |
| Prekės svoris | 7.65 kilogramo |
| Gaminio matmenys | 50L x 26.5W x 30H centimetrai |
| Pagrindinės savybės | Long life air filter, Easy starting - Automatic choke, Safety throttle lever, Rapid reaction chain brake |
Garantija ir palaikymas
For information regarding warranty coverage, terms, and conditions, please refer to the warranty card included with your product or visit the official Tolsen websvetainėje. Išsaugokite pirkimo kvitą kaip pirkimo įrodymą.
For technical assistance, spare parts, or service inquiries, please contact Tolsen customer support. Contact details can typically be found on the product packaging or the official Tolsen websvetainę.
