Teltonika RUTX14 CAT12 4G LTE maršrutizatoriaus naudotojo vadovas

1. Įvadas

The Teltonika RUTX14 is a high-performance industrial cellular router designed for mission-critical applications requiring reliable and secure internet connectivity. Featuring CAT12 LTE for high-speed data transfer, dual-band Wi-Fi (802.11ac), GNSS/GPS capabilities, and Bluetooth, the RUTX14 provides robust networking solutions for various environments. This manual provides essential information for the proper installation, configuration, and operation of your RUTX14 router.

2. Saugos informacija

• Prieš atlikdami bet kokias techninės priežiūros ar montavimo procedūras, visada atjunkite maitinimą.
• Įsitikinkite, kad prietaisas yra sumontuotas gerai vėdinamoje vietoje, kad neperkaistų.
• Use only the power adapter and accessories provided or approved by Teltonika.
• Saugokite įrenginį nuo vandens, drėgmės ar ekstremalių temperatūrų.
• This device is intended for indoor use unless specifically rated for outdoor environments.

3. Pakuotės turinys

Patikrinkite, ar pakuotėje yra visi reikalingi daiktai:

• Teltonika RUTX14 maršrutizatorius
• Maitinimo adapteris
• Mobile Antennas (x4)
• WiFi Antennas (x2)
• GNSS Antenna (x1)
• Ethernet kabelis
• Greitos pradžios vadovas

4. Įrenginys baigtasview

Familiarize yourself with the physical components and ports of the RUTX14 router.

4.1 vaizdas: Labeled diagram of the Teltonika RUTX14 router, highlighting all external ports and connectors for easy identification. This includes mobile antenna connectors, GNSS antenna connector, WiFi antenna connectors, Bluetooth antenna connector, USB port, grounding screw, SIM card slots, reset button, 4-pin power socket, LAN ports, and WAN port.

Priekinis skydelis

4.2 vaizdas: Iš arti view of the RUTX14's front panel. This image displays the PWR LED, Reset button, WiFi 2.4GHz and 5GHz LEDs, SIM1 and SIM2 slots, four LAN ports, one WAN port, and status LEDs for WAN, SIM1, SIM2, WiFi, ETH, 3G/4G, and signal strength.

• PWR šviesos diodas: Nurodo maitinimo būseną.
• Perkrovimo mygtukas: Used to restore factory defaults or reboot the device.
• WiFi LEDs (2.4/5): Indicate Wi-Fi activity for respective bands.
• SIM1/SIM2 Slots: For inserting cellular SIM cards.
• LAN prievadai (1–4): Ethernet ports for local network connections.
• WAN prievadas: Ethernet port for Wide Area Network connection (e.g., to an upstream modem).
• Būsenos šviesos diodai: Provide visual feedback on WAN, SIM status, Wi-Fi, Ethernet, 3G/4G connectivity, and cellular signal strength.

Šoninis skydelis

4.3 vaizdas: Išsamus view of the RUTX14's side panel. This image shows the various antenna connectors: Mobile AUX (x4), Mobile MAIN (x1), GPS (x1), WiFi (x2), and BT (x1). Also visible are the USB port and the grounding screw.

• Mobile Antenna Connectors (MAIN/AUX): For connecting cellular antennas.
• GPS Antenna Connector: For connecting a GNSS/GPS antenna.
• WiFi Antenna Connectors: For connecting Wi-Fi antennas.
• BT antenos jungtis: For connecting a Bluetooth antenna.
• USB prievadas: For connecting external devices or storage.
• Įžeminimo varžtas: Dėl tinkamo įrenginio įžeminimo.

5. Techninės įrangos diegimas

5.1. SIM kortelės montavimas

1. Locate the SIM card slots on the front panel.
2. Using a SIM ejector tool or a paperclip, press the small button next to the SIM slot to open the tray.
3. Insert your activated Nano-SIM card(s) into the tray(s) with the gold contacts facing down.
4. Švelniai stumkite dėklą atgal į angą, kol jis spragtelėdamas užsifiksuos savo vietoje.

5.2. Antenos jungtis

Connect the provided antennas to their respective connectors on the device:

• Mobiliojo ryšio antenos: Connect the four cellular antennas to the 'MOBILE MAIN' and 'MOBILE AUX' connectors.
• WiFi antenos: Connect the two Wi-Fi antennas to the 'WiFi' connectors.
• GNSS antena: Connect the GPS antenna to the 'GPS' connector.
• „Bluetooth“ antena: Connect the Bluetooth antenna to the 'BT' connector.

Ensure all antennas are securely tightened by hand.

5.3. Maitinimo prijungimas

1. Connect the 4-pin power adapter to the power socket on the front panel.
2. Connect the other end of the power adapter to a suitable power source (9-50 VDC).
3. The PWR LED should illuminate, indicating the device is receiving power.

5.4. Įžeminimas

For enhanced safety and protection against electrical surges, connect a grounding wire to the grounding screw on the side panel and to a proper earth ground.

6. Pradinė sąranka

6.1. Prieiga prie Web Vartotojo sąsaja (WebVartotojo sąsaja)

1. Connect your computer to one of the RUTX14's LAN ports using an Ethernet cable.
2. Atidarykite a web naršyklę ir įveskite numatytąjį IP adresą: 192.168.1.1
3. You will be prompted for login credentials. The default username is admin. The default password is usually found on a sticker on the device or in the Quick Start Guide.
4. Upon successful login, you will access the WebKonfigūracijos vartotojo sąsaja.

6.2. Pagrindinė konfigūracija

Follow the on-screen setup wizard or navigate through the WebUI to configure essential settings:

• WAN nustatymai: Configure your primary internet connection (e.g., cellular APN settings, Ethernet WAN).
• LAN nustatymai: Adjust the local network IP range if necessary.
• „Wi-Fi“ nustatymai: Set up your Wi-Fi network name (SSID) and password for both 2.4GHz and 5GHz bands.
• Pakeisti numatytąjį slaptažodį: For security, it is highly recommended to change the default administrator password immediately.

7. Operating the RUTX14

7.1. LED indikatorių supratimas

Monitor the front panel LEDs to understand the router's operational status:

• PWR: Nuolatinė žalia šviesa rodo, kad maitinimas įjungtas.
• SIM1 / SIM2: Indicates active SIM card and network registration.
• 3G / 4G: Indicates cellular network type (3G or 4G LTE).
• Signalo stiprumas: Multiple LEDs indicate the strength of the cellular signal. More LEDs lit means stronger signal.
• WiFi (2.4/5): Indicates Wi-Fi activity on the respective band.
• ETH/LAN/WAN: Indicates Ethernet link status and activity.

7.2. LTE Failover

The RUTX14 supports automatic LTE failover, ensuring continuous internet connectivity. If the primary WAN connection (e.g., Ethernet) fails, the router can automatically switch to the cellular LTE connection. This feature is configured within the WebUI under Network > WAN settings.

7.3. GNSS/GPS Functionality

With the connected GNSS antenna, the RUTX14 can provide precise location data. This functionality is accessible and configurable through the WebUI, enabling applications such as fleet tracking or asset management.

7.4. Bluetooth ryšys

The integrated Bluetooth module allows for short-range wireless communication with compatible devices, enabling various IoT and industrial applications. Configuration options are available in the WebVartotojo sąsaja

8. Priežiūra

8.1. Firmware atnaujinimai

Regularly check for and install firmware updates to ensure optimal performance, security, and access to new features. Firmware updates can be performed via the WebUI under System > Firmware.

8.2. Gamyklinių parametrų atkūrimas

If you encounter persistent issues or forget your login credentials, you can perform a factory reset. Press and hold the RESET button for approximately 10 seconds while the device is powered on. This will revert all settings to their default values.

8.3. Valymas

Įrenginio išorę valykite minkštu, sausu skudurėliu. Nenaudokite skystų valiklių ar tirpiklių.

9. Problemų sprendimas

• Nėra galios: Ensure the power adapter is securely connected and the power outlet is functional. Check the PWR LED.
• Nėra interneto ryšio:
  • Patikrinkite, ar SIM kortelė tinkamai įdėta ir aktyvuota.
  • Check cellular signal strength LEDs.
  • Patvirtinkite APN nustatymus WebUI are correct.
  • If using Ethernet WAN, ensure the cable is connected and the upstream device is working.
• Nepavyksta pasiekti WebNS:
  • Ensure your computer is connected to a LAN port.
  • Patikrinkite, ar jūsų kompiuterio IP nustatymai nustatyti taip, kad IP adresas būtų gaunamas automatiškai (DHCP).
  • Confirm you are using the correct IP address (192.168.1.1) and credentials.
  • Pabandykite išvalyti naršyklės talpyklą arba naudoti kitą naršyklę.
• Lėti greičiai:
  • Check cellular signal strength and try repositioning antennas.
  • Įsitikinkite, kad jokie kiti įrenginiai nenaudoja per daug pralaidumo.
  • Verify your cellular data plan limits.

10. Specifikacijos

11. Garantija ir palaikymas

Teltonika products are covered by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation included with your product or visit the official Teltonika website. For technical support, firmware downloads, and additional resources, please consult the Teltonika support portal or contact your vendor.