SUPERMICRO MBD-X12SPA-TF-O E-ATX serverio pagrindinės plokštės naudotojo vadovas

1. Įvadas

This manual provides detailed instructions for the installation, configuration, and operation of the Supermicro MBD-X12SPA-TF-O E-ATX Server Motherboard. Please read this manual thoroughly before proceeding with installation to ensure proper setup and functionality.

The Supermicro MBD-X12SPA-TF-O is an E-ATX server motherboard designed to support 3rd Gen Intel Xeon Scalable processors and Intel Xeon W-3300 processors with a single LGA-4189 socket. It features the Intel C621A chipset, extensive memory support up to 4TB DDR4-3200MHz, multiple PCIe 4.0 slots, and M.2 NVMe support with RAID capabilities.

2. Produktas baigtasview

The MBD-X12SPA-TF-O motherboard is engineered for high-performance server and workstation applications, offering robust connectivity and expansion options.

1 paveikslas: Iš viršaus į apačią view of the Supermicro MBD-X12SPA-TF-O E-ATX Server Motherboard. This image displays the layout of the CPU socket, DIMM slots, PCIe slots, and various connectors.

Pagrindinės funkcijos:

• Procesoriaus palaikymas: Single Socket LGA-4189 (Socket P+) for 3rd Gen Intel Xeon Scalable processors and Intel Xeon W-3300 processors (up to 270W TDP).
• Lustų rinkinys: Intel C621A.
• Atmintis: 16 DIMM slots supporting up to 4TB 3DS ECC RDIMM/LRDIMM DDR4-3200MHz, and Intel Optane Persistent Memory.
• Išplėtimo lizdai: 4 PCIe 4.0 x16, 3 PCIe 4.0 x8 (in x16 slot).
• Saugykla: 4 PCIe 4.0 x4 M.2 slots (2260/2280/22110, M-Key) with RAID 0,1,5,10 support (VROC key required for RAID). 8 SATA3 (6 Gbps) ports via Intel C621A controller with RAID 0,1,5,10.
• Tinklas: Dual LAN (Intel I210-AT, Marvell AQC113) plus dedicated IPMI LAN (Realtek RTL8211F PHY).
• Grafika: 1 VGA port dedicated for IPMI.

3. Sąranka ir diegimas

3.1 Saugos priemonės

• Always disconnect the power cord from the power supply before handling any components.
• Kad išvengtumėte elektrostatinės iškrovos (ESD) sukeliamos žalos, dėvėkite antistatinį riešo dirželį.
• Handle the motherboard by its edges, avoiding contact with components and connectors.
• Ensure proper ventilation in the server chassis.

3.2 Komponentų diegimas

1. CPU diegimas:

   Carefully align the 3rd Gen Intel Xeon Scalable or Intel Xeon W-3300 processor with the LGA-4189 socket. Ensure the triangular mark on the CPU aligns with the mark on the socket. Gently lower the CPU into the socket without forcing it. Secure the retention mechanism.

2. CPU aušintuvo montavimas:

   Apply thermal paste to the CPU surface if not pre-applied on the cooler. Mount the compatible LGA-4189 CPU cooler according to its manufacturer's instructions. Connect the CPU fan cable to the designated header on the motherboard.

3. Atminties (RAM) diegimas:

   Open the clips on both ends of the DIMM slots. Align the memory module's notch with the key in the DIMM slot. Insert the module firmly until the clips snap into place. Refer to the motherboard's silkscreen for recommended DIMM population order for optimal performance (e.g., A1, B1, C1, D1 first).
4. M.2 NVMe SSD Installation:

   Locate the M.2 slots. Remove the M.2 standoff screw. Insert the M.2 SSD into the slot at a 30-degree angle. Push down the SSD and secure it with the standoff screw. Ensure proper thermal pad application if provided.

5. PCIe kortelės diegimas:

   Open the retention clip of the desired PCIe slot. Align the PCIe card with the slot and press it down firmly until it is fully seated. Secure the card with a chassis screw.

6. SATA Drive Connection:

   Connect SATA data cables from your storage drives to the SATA3 ports on the motherboard. Connect power cables from the power supply to the SATA drives.
7. Maitinimo šaltinio prijungimas:

   Connect the 24-pin ATX main power connector and the 8-pin (or dual 8-pin) CPU power connectors from the power supply to the motherboard.

8. Priekinio skydelio jungtys:

   Connect the front panel headers (power button, reset button, HDD LED, power LED, USB ports, audio) to their respective pins on the motherboard. Refer to the motherboard diagram for correct pin assignments.

4. Naudojimo instrukcijos

4.1 Initial Power On and BIOS Setup

1. After all components are installed and connected, connect the power cord to the power supply and turn on the power switch.
2. Press the power button on the chassis.
3. During POST (Power-On Self-Test), press DEL or F2 (or as indicated on screen) to enter the BIOS/UEFI setup utility.
4. Configure boot order, enable/disable specific features, and set system time/date as needed. Save changes and exit BIOS.

4.2 Operacinės sistemos diegimas

Insert your operating system installation media (USB drive or DVD). Boot from the installation media and follow the on-screen prompts to install your preferred operating system (e.g., Windows Server, Linux distribution).

4.3 Tvarkyklės diegimas

After OS installation, install all necessary drivers for the motherboard chipset, LAN controllers, and any other integrated components. Drivers can typically be found on the Supermicro support websvetainė, skirta jūsų konkrečiam modeliui.

4.4 IPMI Remote Management

The motherboard features a dedicated IPMI LAN port for remote management. Connect an Ethernet cable to this port. Access the IPMI web sąsaja per a web browser using the IP address assigned to the IPMI. Default login credentials are often provided in a separate IPMI manual or on the Supermicro website. IPMI allows for remote power control, system monitoring, and KVM-over-IP functionality.

5. Priežiūra

• Dulkių šalinimas: Regularly clean dust from the motherboard, CPU cooler, and chassis fans using compressed air. Ensure the system is powered off and unplugged before cleaning.
• BIOS / programinės įrangos atnaujinimai: Periodically check the Supermicro website for updated BIOS and firmware versions. Apply updates as recommended to improve stability, performance, and security. Follow the update instructions carefully.
• Kabelių valdymas: Įsitikinkite, kad visi laidai yra tvarkingai išvedžioti, kad būtų užtikrintas optimalus oro srautas ir išvengta trukdžių.
• Aplinkos kontrolė: Operate the server in a clean, temperature-controlled environment to prevent overheating and component degradation.

6. Problemų sprendimas

Dažnos problemos ir sprendimai:

• Nėra galios:
  • Patikrinkite, ar maitinimo šaltinis prijungtas ir įjungtas.
  • Verify all power cables (24-pin ATX, CPU 8-pin) are securely connected to the motherboard.
  • Ensure the front panel power button cable is correctly connected.
• Nėra ekrano:
  • Ensure the monitor is connected to the correct video output (VGA for IPMI, or a dedicated GPU if installed).
  • Reseat memory modules and expansion cards.
  • Patikrinkite procesoriaus įrengimą ir aušintuvo prijungimą.
• Sistemos nestabilumas / gedimai:
  • Check CPU and system temperatures. Ensure adequate cooling.
  • Verify memory modules are correctly installed and compatible. Run memory diagnostics.
  • Atnaujinkite BIOS ir tvarkykles į naujausias versijas.
  • Test components individually if possible (e.g., one RAM stick at a time).
• Storage Drive Not Detected:
  • Check SATA/M.2 cable connections.
  • Ensure drives are powered on.
  • Verify drive detection in BIOS/UEFI settings.
  • For M.2 RAID, ensure VROC key is installed and configured correctly.

For further assistance, refer to the Supermicro support websvetainėje arba susisiekite su jų technine pagalba.

7. Specifikacijos

8. Garantija ir palaikymas

For warranty information and technical support, please visit the official Supermicro websvetainėje arba susisiekite su pirkimo vieta. Išsaugokite pirkimo įrodymą garantiniams reikalavimams.

„Supermicro“ oficialus Websvetainė: www.supermicro.com