LEDONE Remote Control User Manual

1. Įvadas

This manual provides comprehensive instructions for the LEDONE Remote Control, designed for use with Motion Detection, UFO High Bay, Parking Lot Light, and Linear High Bay Lights (specifically HD406VRH Sensor compatible). This remote enhances convenience and control over your lighting systems, allowing for customization of various settings to optimize performance and energy efficiency in commercial spaces.

2. Produkto ypatybės

• Direct control over LED high bay light processes.
• Four pre-programmed fixed scene modes for automatic settings.
• Controls UFO High Bay lights and integrated motion detection sensors.
• Customizable brightness and motion sensor settings.
• Includes essential functions: On/Off, Auto mode, and Reset for straightforward operation.

3. Sąranka

3.1 Akumuliatoriaus įdėjimas

The LEDONE Remote Control requires 'A' type batteries (not included). To install:

1. Nuotolinio valdymo pulto gale raskite baterijų skyriaus dangtelį.
2. Atidarykite dangtelį rodyklės nurodyta kryptimi.
3. Insert the 'A' batteries, ensuring correct polarity (+ and -) as marked inside the compartment.
4. Uždėkite baterijų skyriaus dangtelį, kol jis spragtelėdamas tvirtai užsifiksuos.

3.2 Pradinis prisijungimas

The remote control is designed to work seamlessly with compatible LEDONE UFO High Bay and Linear High Bay Lights equipped with HD406VRH sensors. No complex pairing is typically required; the remote should function upon battery installation and being within range of the compatible light fixture.

4. Naudojimo instrukcijos

Susipažinkite su nuotolinio valdymo pulto išdėstymu:

Figure 1: LEDONE Remote Control Layout

4.1 Pagrindinės funkcijos

• ĮJUNGTA/IŠJUNGTA: Press to toggle the connected light fixture on or off.
• Automatinis režimas: Activates the automatic operation mode, utilizing the sensor's default or previously set parameters.
• Atstatyti: Resets all settings on the connected light fixture to their factory default values.
• Brightness (+/-): Reguliuoja šviesos srauto intensyvumą.

4.2 Išplėstiniai nustatymai

The remote allows for precise customization of sensor and lighting parameters:

• Pradžia: Initiates the application of selected settings.
• Atmintis: Saves the current custom settings for quick recall.
• Taikyti: Applies the settings stored in memory or the currently selected custom settings.

Aptikimo diapazonas

Select the desired motion detection sensitivity:

• 25%, 50%, 75%, 100%: Choose the percentage of the sensor's maximum detection range.

Laikykite laiką

Sets the duration the light remains at full brightness after motion is detected and before dimming or turning off:

• 5s, 30s, 1min, 3min, 5min, 10min, 15min, 30min: Select the hold time in seconds or minutes.

Budėjimo režimo pritemdymo lygis

Determines the light output level during the stand-by period (after hold time and before turning off):

• 10%, 20%, 30%, 50%: Set the dimming percentage.

Budėjimo laikotarpis

Sets the duration the light remains at the stand-by dimming level before turning off completely:

• 0s, 10s, 30s, 1min, 5min, 10min, 30min, +∞: Select the stand-by period. '+∞' indicates the light will remain at the stand-by dimming level indefinitely.

Dienos šviesos jutiklis

Configures the ambient light threshold at which the motion sensor will activate the light:

• 2Lux, 10Lux, 30Lux, 50Lux, 80Lux, 120Lux: Light will only turn on if ambient light is below the selected Lux level.
• Išjungti: The daylight sensor is deactivated, and the light will respond to motion regardless of ambient light.

Bandymas (2 sek.)

Activates a 2-second test mode to verify sensor functionality and current settings.

5. Priežiūra

To ensure optimal performance and longevity of your LEDONE Remote Control:

• Valymas: Nuotolinio valdymo pultą valykite minkštu, sausu skudurėliu. Nenaudokite abrazyvinių valiklių ar tirpiklių.
• Baterijos keitimas: Replace batteries when the remote's response becomes sluggish or inconsistent. Always use new 'A' type batteries.
• Saugykla: Nuotolinio valdymo pultą laikykite vėsioje, sausoje vietoje, apsaugotoje nuo tiesioginių saulės spindulių ir ekstremalių temperatūrų.
• Venkite drėgmės: Do not expose the remote to water or high humidity.

6. Problemų sprendimas

If you encounter issues with your LEDONE Remote Control, refer to the following common problems and solutions:

• Nuotolinis nereaguoja:
  • Patikrinkite akumuliatoriaus įdėjimą ir, jei reikia, pakeiskite baterijas.
  • Ensure there are no obstructions between the remote and the light fixture's sensor.
  • Verify that the light fixture is powered on and functioning correctly.
• Nustatymai netaikomi:
  • Ensure you are pressing the 'Apply' or 'Start' button after making changes.
  • Confirm the remote is within effective range of the light fixture.
  • Try resetting the light fixture using the 'Reset' button on the remote, then re-apply settings.
• Ribotas diapazonas:
  • Pakeiskite baterijas naujomis.
  • Ensure no strong interference sources (e.g., other wireless devices) are nearby.

7. Specifikacijos

8. Garantija ir palaikymas

LEDONE is committed to providing quality lighting solutions and customer satisfaction. Our products are designed for optimal performance and safety. For any inquiries, technical assistance, or warranty information, please contact LEDONE customer service. LEDONE is based in California, offering worry-free services for our products.