WORX NITRO 20V Cordless Paint Sprayer (Model WX020L) User Manual

Svarbi saugos informacija

Always wear appropriate eye and face protection. Use the paint sprayer in a well-ventilated area. Keep the device away from heat and open flames. Do not ingest materials or allow them to get into eyes. Keep out of reach of children. Dispose of batteries and paint materials according to local regulations.

Produktas baigtasview

The WORX NITRO 20V Cordless Paint Sprayer (Model WX020L) is engineered for high performance and extended run time, offering cordless convenience for painting projects. It features a brushless motor for enhanced efficiency and durability.

Figure 1: WORX NITRO 20V Cordless Paint Sprayer with attached battery and paint container.

Pagrindinės funkcijos:

• Akumuliatorinis dizainas: Provides flexibility to paint anywhere without power cords.
• Greičio valdymas: Allows for even paint flow and minimizes over-spraying.
• Power Share Battery System: Suderinamas su daugiau nei 75 20 V, 40 V ir 80 V „WORX Power Share“ įrankiais.
• Reguliuojamas purškimo modelis: Choose between wide or narrow spray patterns for various project needs.
• Keli purkštukai: Includes four nozzle sizes (1.5mm, 1.8mm, 2.2mm, 2.6mm) suitable for stains, primers, and latex paints.
• Didelė talpa: The paint container holds up to 34 fl oz (1000 ml) of material.
• Lengva valyti: Features a garden hose hook-up and detachable accessories for quick cleaning.

Sąranka ir surinkimas

1. Įkraukite akumuliatorių: Insert the 4.0Ah battery into the 2A quick charger and allow it to fully charge before first use.


Figure 2: The 20V Power Share battery, essential for cordless operation.

2. Prijunkite bateriją: Once charged, slide the battery onto the base of the paint sprayer until it clicks into place.
3. Pasirinkite purkštuką: Choose the appropriate nozzle size (1.5mm, 1.8mm, 2.2mm, or 2.6mm) based on the material viscosity and desired spray pattern. One nozzle is pre-installed.
4. Įdiekite antgalį: Twist off the front cap of the sprayer, insert the selected nozzle, and re-secure the cap.

3 pav. Iš arti view of the sprayer nozzle, which can be changed for different spray patterns.
5. Paruoškite medžiagą: Fill the 34 fl oz (1000 ml) paint container with your desired paint, stain, or primer. Ensure the material is properly thinned according to the paint manufacturer's instructions and tested for viscosity using the included viscosity cup.
6. Pritvirtinkite konteinerį: Screw the filled paint container securely onto the sprayer body.

Naudojimo instrukcijos

1. Sureguliuokite oro srautą: Use the red dial at the back of the sprayer to adjust the air flow. Higher numbers typically provide more air for thicker materials.


Figure 4: The air flow control dial located at the rear of the sprayer for precise adjustment.

2. Pasirinkite purškimo modelį: Rotate the orange ear tabs on the front of the nozzle to switch between wide (horizontal or vertical) and narrow (round) spray patterns.
3. Bandomasis purškimas: Before applying to your project, always test the spray pattern and flow on a scrap piece of material. Adjust air flow and spray pattern as needed to achieve an even, consistent coat.
4. Taikyti medžiagą: Hold the sprayer approximately 6-12 inches from the surface. Press the trigger to begin spraying, moving the sprayer in smooth, even strokes. Overlap each pass by about 50% for uniform coverage.

Figure 5: Demonstrating the paint sprayer in action on a wooden surface.
5. Minimize Over-spraying: The speed control feature helps to evenly dispense paint and reduce over-spraying. Practice on scrap material to find the optimal settings for your project.

Produkto demonstracinis vaizdo įrašas:

Priežiūra ir valymas

Proper cleaning after each use is crucial for maintaining the performance and longevity of your paint sprayer.

1. Tuščias konteineris: Remove the paint container and empty any remaining material.
2. Pradinis skalavimas: Fill the container with clean water (for water-based paints) or appropriate cleaning solution (for oil-based paints). Reattach the container and spray the cleaning liquid through the sprayer until it runs clear. Repeat if necessary.
3. Išardyti: Detach the paint container, nozzle, and other removable parts.
4. Kruopštus valymas: Use the included wire brush and declogging needle to clean the nozzle, fluid tube, and any other parts that came into contact with paint. The garden hose adapter can be used for a more convenient rinse of the main sprayer head.
5. Džiovinti ir laikyti: Ensure all components are thoroughly dry before reassembling or storing the sprayer. Store in a clean, dry place.

Trikčių šalinimas

Specifikacijos

• Prekinis ženklas: WORX
• Modelio numeris: WX020L
• Maitinimo šaltinis: Maitinamas baterijomis (20 V ličio jonų)
• Rezervuaro tūris: 1000 Milliliters (34 fl oz)
• Prekės svoris: 3.7 svaro
• Gaminio matmenys: 11.3 x 10.83 x 5.47 colio
• Įtraukti komponentai: Paint Sprayer, 4.0Ah battery, 2A quick charger, 4 nozzles (1.5mm, 1.8mm, 2.2mm, 2.6mm), viscosity cup, wire brush, declogging needle, garden hose adapter
• Medžiaga: Plastikiniai
• Spalva: Juoda, oranžinė
• Rekomenduojami naudojimo būdai: Tapyba

Garantija ir palaikymas

Išsamesnės informacijos apie garantiją ieškokite prie gaminio pridėtoje garantijos kortelėje arba apsilankykite oficialioje WORX svetainėje. website. For technical support, replacement parts, or further assistance, please contact WORX customer service. Keep your purchase receipt for warranty claims.