1. Įvadas
The Phanteks Eclipse P600S is a versatile PC chassis designed to offer a balance between silent operation and high-performance airflow. This manual provides detailed instructions for the installation, operation, and maintenance of your Eclipse P600S PC case. Please read this manual thoroughly before beginning assembly to ensure proper setup and optimal performance.
Image 1.1: The Phanteks Eclipse P600S Matte White Edition PC Case, showcasing savo elegantišku dizainu.
2. Pagrindinės savybės
- Hibridinis dizainas: Seamlessly switch between silent and high-performance modes by adjusting the front and top panels.
- Garsas Dampening Panels: Equipped with effective soundproofing panels for reduced noise emissions in silent mode.
- High-Airflow Fabric Mesh: Utilizes Phanteks' high-airflow fabric for maximum cooling performance.
- Platus pagrindinių plokščių palaikymas: Compatible with ATX, uATX, mITX, and E-ATX motherboards (up to 280mm wide).
- Integrated DRGB Lighting: Includes three 140mm DRGB fans with addressable RGB lighting, compatible with major motherboard sync technologies.
- Universal Fan Hub: Centralized control for fan performance and acoustics.
- Išplėstinis ryšys: Features a front I/O panel with 1x USB 3.1 Type-C and 2x USB 3.0 ports.
- Watercooling Ready: Supports high-end watercooling solutions for both 120mm and 140mm radiator form factors.
- Dvigubos sistemos palaikymas: Allows for the installation of an ITX motherboard in the top section to run simultaneously with the main system.
Image 2.1: The Phanteks Eclipse P600S featuring three included 140mm D-RGB fans, compatible with various motherboard RGB sync technologies.
3. Pakuotės turinys
Prieš tęsdami montavimą, patikrinkite, ar yra visi komponentai:
- Phanteks Eclipse P600S PC Chassis (Matte White, Tempered Glass)
- 3x Phanteks Premium 140mm DRGB Fans (pre-installed)
- Priedų dėžutė (kurioje yra varžtai, kabelių laikikliai ir kitos smulkios dalys)
- Vartotojo vadovas (šis dokumentas)
- 4x 3.5" HDD brackets (pre-installed)
- 3x 2.5" SSD brackets (pre-installed)
4. Sąranka ir diegimas
This section guides you through the process of installing your PC components into the Eclipse P600S chassis.
4.1. Component Breakdown
Familiarize yourself with the various removable and adjustable components of the case.
4.1 paveikslėlis: sprogęs view illustrating the various components of the Phanteks Eclipse P600S, including panels, brackets, and filters.
4.2. Važiuoklės paruošimas
- Padėkite važiuoklę ant stabilaus, lygaus paviršiaus.
- Remove the tempered glass side panel by unlatching it and carefully lifting it away.
- Remove the rear side panel to access the cable management area.
Image 4.2: The Phanteks Eclipse P600S with its tempered glass side panel open, revealing the spacious interior.
4.3. Pagrindinės plokštės montavimas
- Install the necessary motherboard standoffs for your specific motherboard form factor (E-ATX, ATX, uATX, mITX).
- Atsargiai uždėkite pagrindinę plokštę ant atramų, sulygiuodami varžtų skyles.
- Pritvirtinkite pagrindinę plokštę pridėtais varžtais.
4.4. Saugojimo įrenginio diegimas
The P600S supports up to 10x 3.5" HDDs (4 included) and 3x 2.5" SSDs (3 included).
- 3.5 colio kietieji diskai: Mount HDDs into the removable drive trays located in the PSU shroud area. Slide the trays back into their slots until they click into place.
- 2.5 colio SSD diskai: Mount SSDs onto the dedicated 2.5" brackets, then secure these brackets to the rear of the motherboard tray.
4.3 paveikslėlis: Interjeras view of the Phanteks Eclipse P600S, highlighting the drive bay area beneath the PSU shroud.
4.5. Maitinimo šaltinio (PSU) įrengimas
- Slide the PSU into the dedicated compartment at the bottom rear of the chassis.
- Pritvirtinkite maitinimo bloką varžtais iš korpuso galo.
4.6. Priekinės I/O jungtys
Connect the front I/O cables to your motherboard. The P600S features:
- 1x USB 3.1 C tipo prievadas
- 2x USB 3.0 prievadai
- Mikrofono lizdas
- Ausinių lizdas
- Atstatyti mygtukas
Image 4.4: Close-up of the Phanteks Eclipse P600S front I/O panel, showing the USB 3.0, USB-C, and audio ports.
4.7. Ventiliatoriaus ir radiatoriaus montavimas
Korpusas palaiko įvairias ventiliatoriaus ir radiatoriaus konfigūracijas:
- Priekyje: Up to 3x 120mm or 3x 140mm fans (3x 140mm DRGB fans pre-installed). Radiator support up to 360mm (120mm) or 420mm (140mm).
- Į viršų: Up to 3x 120mm or 2x 140mm fans. Radiator support up to 360mm (120mm) or 280mm (140mm).
- Galinis: 1x 120mm or 1x 140mm fan. Radiator support 120mm or 140mm.
Connect all fan cables to the universal fan hub located behind the motherboard tray, then connect the fan hub to your motherboard's fan header and a SATA power connector.
5. Operating Modes: Silent vs. Performance
The Eclipse P600S features a hybrid design allowing you to optimize for either quiet operation or maximum airflow.
Image 5.1: Diagram illustrating the two interchangeable modes of the Phanteks Eclipse P600S: Silent Mode and High-Performance Mode.
5.1. Tylusis režimas
For reduced noise, ensure the front and top panels are closed. These panels are lined with sound-dampening material to minimize acoustic output from your components.
5.2 vaizdas: priekis view of the Phanteks Eclipse P600S with the solid front panel closed, optimized for silent operation.
5.2. High-Performance Mode
For maximum airflow and cooling, remove the front and top sound-dampening panels to reveal the high-airflow fabric mesh. This allows for unrestricted air intake and exhaust.
5.3 vaizdas: priekis view of the Phanteks Eclipse P600S with the front panel removed, exposing the mesh for high-performance airflow.
Image 5.4: An airflow diagram illustrating the optimized air pathways within the Phanteks Eclipse P600S chassis.
6. Priežiūra
Reguliarus kompiuterio korpuso aptarnavimas užtikrina optimalų našumą ir ilgaamžiškumą.
- Dulkių filtrai: The Eclipse P600S includes removable dust filters at the front, top, and bottom. Regularly clean these filters by gently removing them and washing them with water or brushing off accumulated dust. Ensure they are completely dry before reinstallation.
- Išorinis valymas: Išorinius paviršius nuvalykite minkšta, damp skudurėliu. Venkite abrazyvinių valiklių ar tirpiklių.
- Vidaus valymas: Reguliariai naudokite suslėgtą orą, kad pašalintumėte dulkes nuo vidinių komponentų ir ventiliatoriaus menčių. Prieš valydami įsitikinkite, kad sistema išjungta ir atjungta nuo elektros tinklo.
7. Problemų sprendimas
If you encounter issues with your PC build, consider the following common troubleshooting steps related to the chassis:
- Nėra galios: Ensure the power supply is correctly installed and connected, and all front panel power switch cables are securely attached to the motherboard.
- Fans Not Spinning/DRGB Not Lighting: Verify that all fan cables are connected to the fan hub, and the fan hub is receiving SATA power. Check DRGB connections to the motherboard or controller.
- Neveikiantys USB prievadai: Confirm that the front panel USB 3.0 and USB 3.1 Type-C cables are correctly plugged into the corresponding headers on your motherboard.
- Prastas oro srautas / perkaitimas: Ensure the case is in High-Performance mode (mesh panels exposed) if high cooling is required. Clean all dust filters. Verify fan orientation for proper intake and exhaust.
- Per didelis triukšmas: If in Silent Mode, ensure all sound-dampening panels are securely closed. Check for loose components or vibrating fan mounts.
8. Specifikacijos
| Funkcija | Specifikacija |
|---|---|
| Modelio pavadinimas | P600S |
| Prekės modelio numeris | PH-EC600PSTG_DMW01 |
| Matmenys (IxPxH) | 20.1 x 9.45 x 20.5 colio (510 x 240 x 520 mm) |
| Prekės svoris | 22 svaro (10 kg) |
| Spalva | Matinė Balta |
| Medžiaga | Grūdintas stiklas, plienas, plastikas |
| Pagrindinės plokštės suderinamumas | E-ATX (up to 280mm wide), ATX, Micro-ATX, Mini-ITX |
| Išplėtimo lizdai | 7 |
| Vidinės 3.5 colių diskų angos | 10 (4 įskaičiuoti) |
| Vidinės 2.5 colių diskų angos | 3 (3 įskaičiuoti) |
| Priekinė I/O | 1x USB 3.1 Type-C, 2x USB 3.0, Mic, Headphone, Reset |
| Iš anksto įdiegti ventiliatoriai | 3x 140mm DRGB Fans (Front) |
| Ventiliatoriaus laikiklis (priekinis) | 3 x 120 mm arba 3 x 140 mm |
| Ventiliatorių palaikymas (viršuje) | 3 x 120 mm arba 2 x 140 mm |
| Ventiliatoriaus laikiklis (gale) | 1 x 120 mm arba 1 x 140 mm |
| Radiatoriaus atrama (priekinė) | Up to 360mm (120mm) / 420mm (140mm) |
| Radiatoriaus atrama (viršuje) | Up to 360mm (120mm) / 280mm (140mm) |
| Radiatoriaus atrama (galinė) | 120 mm / 140 mm |
| Maksimalus GPU ilgis | 435 mm / 17.24 colio |
| Maksimalus procesoriaus aušintuvo aukštis | 190 mm / 7.48 colio |
| Maitinimo šaltinio tvirtinimo tipas | Bottom Mount or Rear Mount |
9. Garantija ir palaikymas
Phanteks products are designed and manufactured to the highest quality standards. For detailed warranty information and technical support, please refer to the official Phanteks websvetainėje arba susisiekite tiesiogiai su jų klientų aptarnavimo tarnyba. Išsaugokite pirkimo įrodymą garantiniams reikalavimams.
Daugiau pagalbos rasite oficialiame „Phanteks“ pagalbos puslapyje: www.phanteks.com/support.html
