ULANZI ST-29 Universal 2-in-1 Tablet and Smartphone Tripod Mount Instruction Manual

Įvadas

Thank you for choosing the ULANZI ST-29 Universal 2-in-1 Tablet and Smartphone Tripod Mount. This versatile adapter is designed to securely hold a wide range of mobile devices, from smartphones to tablets, allowing for stable mounting on tripods and other accessories. Its robust construction and thoughtful features make it an essential tool for content creators, photographers, and anyone seeking enhanced stability for their mobile devices.

Produkto savybės

• Visuotinis suderinamumas: Two-way adjustable design accommodates devices from 2.6 inches to 8.8 inches wide, suitable for most smartphones and tablets (e.g., iPhone, iPad Mini, iPad, iPad Air, iPad Pro, Surface Go). Note: Tablets are supported in landscape orientation only.
• Dual 1/4" Screw Holes: Features 1/4-inch screw holes on both the back and bottom for flexible mounting on tripods, monopods, or other accessories. These can also be used to extend microphone or speaker stands.
• Šaltojo bato laikiklis: Integrated cold shoe on the top allows for easy attachment of LED video lights, microphones, monitors, or other photographic accessories, enhancing your setup for professional use.
• Kompaktiškas ir lengvas: Weighing only 0.14 lbs (64g), this adapter is highly portable while maintaining excellent load-bearing capacity for secure device holding.
• High Security & Protection: Equipped with silicone non-slip pads and high-density sponge pads on the inside of the clip to protect your device from scratches and ensure a secure grip.

Sąrankos instrukcijos

1. Įrenginio prijungimas:
   • Extend the spring-loaded clamp by gently pulling one side outwards.
   • Carefully place your smartphone or tablet into the mount, ensuring it is centered and the silicone pads are in contact with your device's edges.
   • Atleiskite klamp to allow it to securely grip your device. For tablets, ensure landscape orientation.
2. Tvirtinimas ant trikojo:
   • Locate the 1/4-inch screw holes on the back or bottom of the ST-29 mount.
   • Align the desired screw hole with the 1/4-inch screw on your tripod or monopod.
   • Rotate the mount clockwise onto the tripod screw until it is firmly secured. Do not overtighten.
3. Attaching Accessories (Cold Shoe):
   • Slide your cold shoe compatible accessory (e.g., LED light, microphone) into the cold shoe mount located on the top of the ST-29.
   • Tighten any locking mechanism on your accessory to secure it in place.

Image: The ULANZI ST-29 mount showing its adjustable width (2.6"-8.8") and compatibility with various smartphones and tablets in landscape mode.

Image: Demonstrates the two expansion modes of the ULANZI ST-29, illustrating how it can be adjusted to securely hold both smartphones and larger tablets.

Naudojimo instrukcijos

1. Adjusting Device Orientation: The mount allows for easy rotation when attached to a tripod head, enabling quick switching between horizontal (landscape) and vertical (portrait) orientations for your device. Ensure your tripod head supports this flexibility.
2. Using the 1/4" Screw Holes: The multiple 1/4-inch screw holes provide flexibility for mounting the device in various positions on your tripod or rig. Experiment with different mounting points to achieve your desired angle and stability.
3. Priedų integravimas: Utilize the cold shoe mount for external microphones, LED lights, or other accessories to enhance your content creation. Ensure accessories are lightweight and properly secured to maintain balance.

Vaizdas: Išsamus view of the ULANZI ST-29 highlighting key features such as the cold shoe interface, protective silicone/sponge pads, and the 1/4-inch universal screw port.

Image: Illustrates the universal 1/4-inch screw design of the ULANZI ST-29, showing how it can be installed on the back or bottom of a tripod for flexible positioning.

Priežiūra

• Keep the mount clean by wiping it with a soft, dry cloth.
• Saugokite laikiklį nuo ekstremalių temperatūrų ar stiprių cheminių medžiagų.
• Regularly check all screws and moving parts to ensure they are secure.
• Store the mount in its original packaging or a protective pouch when not in use to prevent damage.

Trikčių šalinimas

• Device not holding securely: Įsitikinkite, kad klamp is fully extended and properly gripping the device. Check that the device width is within the 2.6"-8.8" range. Verify that the silicone and sponge pads are intact.
• Mount feels loose on tripod: Ensure the 1/4-inch screw is tightened securely to the tripod head. If using an adapter, ensure the adapter itself is stable.
• Accessories not fitting cold shoe: Verify that your accessory is cold shoe compatible. Ensure it is slid in completely and any locking mechanism on the accessory is engaged.

Specifikacijos

Garantija ir palaikymas

For warranty information or technical support, please refer to the official ULANZI websvetainėje arba susisiekite tiesiogiai su jų klientų aptarnavimo tarnyba. Išsaugokite pirkimo kvitą garantiniams reikalavimams.