Įvadas
This manual provides essential information for the safe and efficient operation, assembly, and maintenance of your Nilox J1 PRO Folding Electric Bicycle. Please read this manual thoroughly before using your e-bike and retain it for future reference.
The Nilox J1 PRO combines the convenience of a folding bicycle with the power of an electric motor, offering an eco-friendly and dynamic urban commuting solution.
Vaizdas: Šoninė view of the Nilox J1 PRO folding electric bicycle, showcasing its design with a front basket and rear rack.
Pakuotės turinys
Išpakuodami patikrinkite, ar yra visi daiktai ir ar jie nepažeisti:
- Nilox J1 PRO eBike (90% assembled)
- Vartotojo vadovas
- Assembly Kit (tools for final assembly)
- Akumuliatoriaus įkroviklis
Sąranka ir pradinis surinkimas
Your Nilox J1 PRO eBike is delivered approximately 90% assembled. The following steps detail the completion of the assembly process.
1. Unfolding the Bicycle
Carefully remove the e-bike from its packaging. Locate the main folding hinge on the frame. Release the safety latch and unfold the frame until it locks into place. Secure the latch firmly.
Vaizdas: Stambus planas view of the e-bike's folding mechanism, showing the hinge and latch system on the frame.
2. Handlebar and Seatpost Adjustment
Adjust the handlebar stem and seatpost to your preferred riding height. Ensure all quick-release levers are securely tightened after adjustment. The handlebar stem also features a folding mechanism; ensure it is locked in the upright position.
3. Pedalų montavimas
Identify the left (L) and right (R) pedals. The left pedal typically has a reverse thread. Apply a small amount of grease to the threads and carefully screw each pedal into its respective crank arm. Tighten them firmly with a wrench from the assembly kit.
4. Baterijos įdėjimas ir pradinis įkrovimas
The battery is usually located on the rear rack. Ensure it is securely seated and locked into position. Before first use, fully charge the battery using the provided charger. Connect the charger to the battery port and then to a standard electrical outlet. The charging indicator on the charger will show the charging status.
Vaizdas: Išsamus view of the rear section of the e-bike, highlighting the rear wheel, electric motor hub, and the battery mounted on the rear rack.
5. Patikrinimai prieš važiavimą
Before your first ride, perform the following checks:
- Padangos: Ensure tires are inflated to the recommended pressure (check sidewall).
- Stabdžiai: Patikrinkite priekinių ir galinių stabdžių veikimą ir reakciją.
- Šviesos: Verify that the front and rear LED lights are working.
- Greiti išleidimai: Confirm all quick-release levers (seatpost, handlebar) are securely fastened.
- Pavaros: If applicable, check that the 6-speed gear system shifts smoothly.
Naudojimo instrukcijos
The Nilox J1 PRO is designed for intuitive operation. Familiarize yourself with the controls before riding.
1. Įjungimas/išjungimas
To power on the e-bike's electrical system, press and hold the ON/OFF button on the handlebar control unit. Repeat to power off.
2. Pedalų pagalbos sistema (PAS)
The e-bike features a pedal-assist system. Once powered on, begin pedaling, and the motor will provide assistance. Use the MODE button on the handlebar control unit to select different levels of assistance (Low, Medium, High). Higher assist levels provide more power and speed but consume battery faster.
Image: Close-up of the handlebar-mounted control unit, showing the ON/OFF button, light control, and pedal assist level indicators (Low, Med, High).
3. Šviesos
Press the LIGHT button on the control unit to turn the front and rear LED lights on or off for improved visibility.
4. Pavarų perjungimas
The Nilox J1 PRO is equipped with a 6-speed gear change system. Use the gear shifter on the handlebar to select appropriate gears for different terrains and speeds. Shift smoothly to avoid strain on the drivetrain.
5. Stabdymas
The e-bike uses V-brakes. Apply both front and rear brakes gently and evenly to slow down or stop. Avoid sudden, hard braking, especially with the front brake, to prevent loss of control.
6. Folding for Storage/Transport
To fold the e-bike, ensure it is powered off. Release the safety latch on the main frame hinge and fold the frame. Fold the handlebar stem down and collapse the pedals if they are foldable. This compacts the bike for easy storage or transport.
Priežiūra
Regular maintenance ensures the longevity and safe operation of your Nilox J1 PRO eBike.
- Akumuliatoriaus priežiūra:
- Reguliariai įkraukite bateriją, net jei jos nenaudojate, kad palaikytumėte jos būklę.
- Venkite visiškai iškrauti akumuliatorių.
- Bateriją laikykite vėsioje, sausoje vietoje, toliau nuo tiesioginių saulės spindulių ir ekstremalių temperatūrų.
- Padangų slėgis: Check tire pressure weekly and inflate to the recommended PSI (found on the tire sidewall).
- Stabdžiai: Inspect brake pads for wear and replace them when necessary. Ensure brake cables are free from fraying and properly adjusted.
- Grandinė: Kad pavarų perjungimas būtų sklandus ir nesusidėvėtų, grandinė turi būti švari ir sutepta.
- Tvirtinimo detalės: Periodiškai patikrinkite visų varžtų, veržlių ir greito atleidimo svirčių priveržtumą.
- Valymas: Išvalykite elektrinį dviratį su reklamaamp šluoste. Venkite naudoti aukšto slėgio plovimo įrenginius tiesiai ant elektrinių komponentų.
Trikčių šalinimas
This section addresses common issues you might encounter with your Nilox J1 PRO eBike.
| Problema | Galima priežastis | Sprendimas |
|---|---|---|
| Varikliui nėra maitinimo | Battery discharged, battery not properly connected, power button not pressed. | Charge battery, ensure battery is securely seated, press and hold power button. |
| Motor assistance is weak or inconsistent | Low battery charge, incorrect assist level selected, sensor issue. | Recharge battery, select a higher assist level, check pedal assist sensor for obstructions. |
| Stabdžiai jaučiasi kieti arba neefektyvūs | Susidėvėjusios stabdžių kaladėlės, atsilaisvinęs stabdžių trosas, oras hidraulinėje sistemoje (jei taikoma). | Patikrinkite ir pakeiskite stabdžių kaladėles, sureguliuokite stabdžių trosų įtempimą, dėl hidraulinių stabdžių problemų kreipkitės į specialistą. |
| Šviesos neveikia | Lights switched off, loose connection, low battery. | Press light button, check connections, charge battery. |
If you encounter issues not listed here or cannot resolve a problem, please contact Nilox customer support.
Specifikacijos
Key technical specifications for the Nilox J1 PRO Folding Electric Bicycle:
| Funkcija | Detalė |
|---|---|
| Modelio numeris | J1 PLUS |
| Variklio galia | 36V / 250W Brushless High Speed |
| Baterijos tipas | 36V - 8Ah Lithium-ion (included) |
| Maksimalus greitis (su pagalba) | Iki 25 km / h |
| Max Range (Assisted) | Iki 40 km |
| Įkrovimo laikas | Maždaug 4 val |
| Rato dydis | 20 colių |
| Rėmo medžiaga | Plieno lydinys |
| Stabdžių tipas | V-Brakes |
| Greičių skaičius | 1 (Note: Product title mentions 6-speed gear change, please refer to product packaging for exact gear configuration.) |
| Produkto matmenys (išlankstytas) | 167 x 62 x 122 cm |
| Gaminio matmenys (sulankstyta) | 83 x 64 x 86 cm |
| Svoris | 18 kg (21 kg with battery) |
| Rekomenduojamas amžius | Suaugusieji |
| Ypatingos savybės | Front Basket, Rear Rack, Lightweight, Foldable, Portable, Rechargeable LED Lights |
Garantija ir palaikymas
For warranty information, please refer to the documentation included with your purchase or visit the official Nilox websvetainėje. Išsaugokite pirkimo įrodymą garantiniams reikalavimams.
If you require technical assistance or have questions regarding your Nilox J1 PRO eBike, please contact Nilox customer support through their official channels. Contact details can typically be found on the Nilox websvetainėje arba produkto pakuotėje.
