Tormek KJ-140 Wide Centering Knife Jig Instruction Manual

1. Produktas baigtasview

The Tormek KJ-140 Wide Centering Knife Jig is designed for sharpening long and flexible knife blades on your Tormek sharpening system. It ensures symmetrical bevels regardless of blade thickness or geometry, providing stability for optimal sharpening results.

Pagrindinės funkcijos:

Centers long, flexible knife blades in the jig for optimal, symmetrical results.
The 5 1/2" wide clamp stabilizes flexible blades.
Includes an extra stop for tall knives, such as cleavers.
Well-balanced design, with most weight focused on the clamps, for a balanced feel during grinding.
Compatible with Tormek T-4, T-8, and older Tormek sharpening system models.

An image showing the Tormek KJ-140 Wide Centering Knife Jig, highlighting its wide clamp ir ergonomiškas dizainas.

2. Saugos informacija

Always prioritize safety when operating sharpening equipment. Failure to follow these instructions may result in injury or damage to the product.

Visada dėvėkite tinkamas asmenines apsaugos priemones, įskaitant akių apsaugos priemones.
Ensure your Tormek sharpening system is stable and securely placed on a flat surface.
Keep hands and fingers clear of the grinding wheel and rotating parts during operation.
Do not force the knife against the grinding wheel; apply gentle, consistent pressure.
Unplug the sharpening system from the power source before making adjustments or performing maintenance.
Keep children and unauthorized personnel away from the sharpening area.
Handle sharp knives with extreme care.

3. Pakuotės turinys

1 x Tormek KJ-140 Wide Centering Knife Jig
Instrukcijų vadovas (šis dokumentas)

4. Sąranka

4.1 Attaching the Jig to the Universal Support

The KJ-140 jig attaches to the Tormek Universal Support. Insert the jig's shaft into the universal support and secure it in place. Ensure the jig can slide smoothly along the support bar.

4.2 Mounting the Knife

Atidarykite klamp of the KJ-140 jig. Insert the knife blade into the clamp, ensuring it is centered. The jig's design allows for self-centering of the blade, providing symmetrical grinding on both bevels. For long or flexible blades, ensure the blade is fully supported and stable within the 5 1/2 inch wide clamp. Priveržkite klamp securely to hold the knife firmly in position.

Hands mounting a knife into the Tormek KJ-140 Wide Centering Knife Jig — A user's hands are shown carefully inserting a knife blade into the Tormek KJ-140 Wide Centering Knife Jig, which is attached to a Tormek sharpening system's universal support. This demonstrates the initial setup step for sharpening.

Tormek KJ-140 jig with a knife on a sharpening stone — This image illustrates the Tormek KJ-140 Wide Centering Knife Jig holding a knife blade against the rotating sharpening stone of a Tormek system. The jig is positioned on the universal support, ready for the sharpening process.

5. Naudojimo instrukcijos

5.1 Sharpening Process

With the knife securely mounted in the KJ-140 jig and the jig attached to the universal support, adjust the universal support to achieve the desired sharpening angle. Gently guide the knife, held by the jig, across the grinding wheel. Maintain consistent pressure and movement to ensure an even bevel. The jig's design allows you to follow the contours of various blade shapes, from straight to recurve.

5.2 Centering Feature

The KJ-140 jig automatically centers the knife blade, regardless of its thickness or geometry. This feature ensures that the grinding action is symmetrical on both sides of the blade, eliminating the need for manual adjustments to achieve an even bevel. This is particularly beneficial for knives with varying blade profiles or tapers.

Close-up of a knife blade being sharpened with the Tormek KJ-140 jig — Iš arti view of a knife blade being sharpened on a Tormek grinding wheel, held precisely by the KJ-140 Wide Centering Knife Jig. This image highlights the jig's ability to maintain a consistent angle during the sharpening process.

Sharpening a recurve knife with the Tormek KJ-140 jig — This image demonstrates the versatility of the Tormek KJ-140 Wide Centering Knife Jig, showing it in use to sharpen a recurve knife blade. The jig allows the user to follow the blade's unique shape while maintaining a precise sharpening angle.

6. Priežiūra

After each use, clean the jig to remove any grinding residue or metal particles. Use a damp cloth to wipe down all surfaces.
Įsitikinkite, kad klamping mechanism is free of debris to maintain optimal grip.
Store the KJ-140 jig in a dry, clean place to prevent corrosion and damage.
Periodically check all screws and moving parts for tightness and wear. Tighten as necessary.

7. Problemų sprendimas

problema	Galima priežastis	Sprendimas
Knife not holding securely	Clamp not tightened sufficiently; debris in clamp	Užtikrinkite clamp is fully tightened; clean clamp mechanizmas.
Uneven bevels	Incorrect angle setting; inconsistent pressure	Verify universal support angle; apply consistent, gentle pressure across the blade.
Jig not sliding smoothly	Universal support bar dirty; jig mechanism obstructed	Clean the universal support bar; check jig for debris and clean.

8. Specifikacijos

Modelis: KJ-140
Prekinis ženklas: Tormek
Medžiaga: Legiruotasis plienas
Gaminio matmenys: 6.25 colio ilgio x 5.5 colių pločio x 5.5 colio aukščio
Prekės svoris: 340 gramų (12 uncijos)
Clamp Plotis: 5 1/2 inches (for stabilizing flexible blades)
Suderinamumas: Tormek T-4, T-8, and older Tormek sharpening systems

9. Garantija ir palaikymas

For warranty information and technical support, please refer to the official Tormek website or contact your authorized Tormek dealer. Keep your purchase receipt as proof of purchase.

	„Tormek KS-123“ peilių kampo nustatymo įrankis: tikslaus galandimo naudotojo vadovas Išsamus „Tormek KS-123“ peilių kampų nustatymo įrankio vadovas, kuriame išsamiai aprašomas jo suderinamumas, sąranka ir naudojimas siekiant tikslių galandimo kampų „Tormek“ staklėmis. Apima dalių identifikavimą ir nuoseklias instrukcijas.
	„Tormek KJ-45“ ir „KJ-140“ centravimo peilių įtaiso naudojimo instrukcija Išsami „Tormek KJ-45“ ir „KJ-140“ centravimo peilių įtaisų, skirtų tiksliam ir kontroliuojamam peilių galandimui, naudojimo instrukcija. Sužinokite, kaip pritvirtinti peilius, nustatyti ašmenų kampus, pagaląsti ir galandinti įvairių tipų ašmenis, kad jie būtų optimaliai aštrūs ir patvarūs. Pateikiama išsami informacija apie įtaiso komponentus, ašmenų storio ir aukščio reikalavimus bei rekomenduojamus skirtingų peilių galandimo būdus.
	„Tormek SC-60“ žirklių įtaiso naudojimo instrukcija Sužinokite, kaip efektyviai galąsti žirkles, gyvatvorių žirkles ir obliavimo staklės peilius naudojant „Tormek SC-60“ žirklių įtaisą. Šioje išsamioje „Tormek“ naudojimo instrukcijoje aprašomas įrengimas, kampo nustatymas, galandimo būdai ir suderinamumas su „Tormek“ galandimo sistemomis.
	Tormek T-8 Original & 50th Anniversary Black Edition Sharpening Systems Explore the versatile Tormek T-8 Original and the exclusive Tormek Black T-8 50th Anniversary Edition sharpening systems. Discover features, accessories, and specifications for professional edge maintenance.
	„Tormek T-4“ atsarginių dalių sąrašas ir schema Išsamus „Tormek T-4“ galandimo staklių dalių sąrašas ir schema, įskaitant dalių numerius, kiekius ir aprašymus, kad būtų lengva identifikuoti ir užsisakyti atsargines dalis.
	Tormek T-7 Water Cooled Sharpening System: Features, Jigs & Specifications Discover the Tormek T-7 Water Cooled Sharpening System, renowned for its repeatability, speed, and ability to extend tool life. This comprehensive guide details its features, various jigs, special stones, and technical specifications, making it an essential tool for woodworkers and craftspeople seeking precision sharpening.

Tormek KJ-140