Maxxima 2-inch Ultra-Thin Recessed Anti-Glare LED Downlight

1. Saugos informacija

Please read and understand all instructions completely before beginning installation. Failure to follow these instructions may result in electric shock, fire, or other hazards that could cause property damage or personal injury.

• Gaisro pavojus: Supply conductors (power wiring) connecting to the fixture must be rated 90°C. If you are uncertain, consult a qualified electrician.
• Elektros smūgio pavojus: LED Retrofit Kit montavimas reikalauja žinių apie šviestuvų elektros sistemas. Jei nesate kvalifikuotas, nebandykite įdiegti. Kreipkitės į kvalifikuotą elektriką.
• Install this kit only in luminaires that have the construction features and dimensions shown in the product documentation.
• To prevent wiring harness or abrasion, do not expose wiring to edges of sheet metal or other sharp objects.
• Šis lamp is not intended for use with emergency exit luminaires or emergency lights.
• Prieš pradėdami montuoti, patikrinkite vietinį elektros kodą, nes jis nustato jūsų vietovėje taikomus laidų standartus.
• The fixture is designed to be switched from a wall switch. Ensure the black power supply wire is connected to the switch. Do NOT connect the white supply wire to the switch.
• Do not leave bare wires or exposed outside the wire nut connectors.
• Montuodami rinkinį nedarykite ir nekeiskite jokių atvirų skylių laidų ar elektros komponentų korpuse.
• This product is ETL Listed and operates at 120VAC.

2. Produktas baigtasview

The Maxxima 2-inch Ultra-Thin Recessed Anti-Glare LED Downlight is a canless, IC rated lighting fixture designed for various indoor applications. It features a round black trim and offers customizable lighting with 5 selectable color temperatures and dimming capabilities.

• Energiją taupantis: 9W LED, equivalent to 40W, consuming less power.
• Ryškumas: 550 Lumens with anti-glare lighting and a 36° beam spread.
• Color Temperature Selectable (CCT): Choose from 2700K (Soft White), 3000K (Warm White), 3500K (Bright White), 4000K (Neutral White), or 5000K (Daylight).
• Pritemdomas: Compatible with most standard LED dimmers, offering a 20%-100% dimmable range.
• Aukštas CRI: 90 CRI rating for accurate color appearance.
• Patvari konstrukcija: Features a durable cast aluminum body and deep recessed trim.
• Damp Įvertinta: Tinka naudoti damp locations such as bathrooms and kitchens.

Figure 2.1: Maxxima 2-inch Ultra-Thin Recessed LED Downlight, Black

3. Dalių sąrašas

Prieš pradėdami montuoti, įsitikinkite, kad yra visi komponentai:

• LED Downlight with spring clips
• Junction Box (with integrated CCT selection switch)
• Connector cable (pre-attached to downlight and junction box)
• Putplasčio tarpiklis

3.1 pav.: šonas view of the Maxxima 2-inch Ultra-Thin Recessed LED Downlight, showing the heat sink and connector.

4. Sąranka ir diegimas

This downlight is designed for easy installation without the need for a traditional recessed can or housing.

1. Paruoškite atidarymą: Cut a hole in the ceiling drywall with a recommended diameter of 2.5 inches. Ensure there are no obstructions in the ceiling space.
2. Prijunkite laidus: Open the junction box. Connect the building's supply wires (typically black for live, white for neutral, and green/bare copper for ground) to the corresponding wires inside the junction box using appropriate wire connectors. Ensure all connections are secure and comply with local electrical codes.
3. Pasirinkite spalvų temperatūrą: Before closing the junction box, use the CCT selection switch located inside the junction box to choose your desired color temperature (2700K, 3000K, 3500K, 4000K, or 5000K).
4. Jungiamosios dėžutės padėtis: Place the junction box into the ceiling beam or through the cutout hole into the ceiling cavity.
5. Prijunkite žemyn nukreiptą šviestuvą: Connect the downlight's cable to the junction box's cable using the provided quick connector. Ensure a firm connection.
6. Įmontuokite įleidžiamąjį šviestuvą: Gently push the spring clips on the sides of the downlight upwards. Insert the downlight into the cutout hole. The spring clips will automatically secure the fixture against the ceiling. Ensure the foam gasket creates a tight seal.

4.1 pav.: Gaminio matmenys, skirti montavimo planavimui.

Figure 4.2: CCT selection switch inside the junction box.

5. Naudojimo instrukcijos

Once installed, operating your Maxxima LED downlight is straightforward.

5.1. Color Temperature Selection

The desired color temperature (CCT) must be selected using the switch inside the junction box prieš installation or by accessing the junction box after installation. The available options are 2700K, 3000K, 3500K, 4000K, and 5000K.

Figure 5.1: Visual comparison of selectable color temperatures.

5.2. Pritemdymas

This downlight is dimmable from 20% to 100% with most standard LED dimmers. Ensure your dimmer switch is compatible with LED fixtures for optimal performance and to prevent flickering.

Figure 5.2: Downlight installed in a ceiling, demonstrating illumination.

6. Priežiūra

The Maxxima LED downlight requires minimal maintenance.

• Valymas: To clean the fixture, ensure power is off. Wipe the surface with a soft, dry, or slightly damp audinys. Nenaudokite stiprių cheminių medžiagų ar abrazyvinių valiklių.
• Nėra vartotojo aptarnaujamų dalių: LED šviesos šaltinis yra integruotas ir nekeičiamas. Nebandykite atidaryti ar taisyti šviestuvo.

7. Problemų sprendimas

Jei kyla problemų dėl įleidžiamojo šviestuvo, žr. šias dažniausiai pasitaikančias problemas ir sprendimus:

8. Specifikacijos

9. Garantija ir palaikymas

This Maxxima LED downlight is covered by a 3 metų garantija nuo pirkimo datos.

For warranty claims, technical support, or any questions regarding your product, please contact Maxxima customer service. Refer to the product packaging or the official Maxxima websvetainė, kurioje pateikiama naujausia kontaktinė informacija.

Prašome išsaugoti pirkimo įrodymą garantijos tikslais.