Įvadas
The Phanteks Eclipse G360A is a high-performance mid-tower gaming chassis designed for optimal airflow and component compatibility. It features an ultra-fine performance mesh front panel for superior cooling and dust filtration, integrated Digital-RGB lighting, and extensive support for modern gaming hardware including large GPUs and advanced liquid cooling solutions. This manual provides detailed instructions for setting up, operating, and maintaining your Eclipse G360A chassis.
Sąranka ir diegimas
1. Išpakavimas ir turinys
Carefully remove the chassis from its packaging. Verify that all components and accessories are present. The package should include the Eclipse G360A chassis, pre-installed 120mm D-RGB fans, and an accessory box containing screws, zip ties, and the user manual.
2. Komponentų suderinamumas
- Pagrindinės plokštės palaikymas: ATX, micro-ATX, mini-ITX, E-ATX (up to 280mm wide).
- GPU ilgis: Up to 400 mm (15.7 in).
- CPU aušintuvo aukštis: Up to 162 mm (6.3 in).
- PSU ilgis: Up to 220 mm (280 mm depending on HDD cage location).
- Saugykla: 2x 3.5" internal (included), 3x 2.5" internal (2 included).
1 pav. Vidinis view highlighting 400mm GPU clearance, supporting high-end graphics cards.
Figure 2: Multiple storage options for 2.5" and 3.5" drives, with flexible mounting points.
3. Diegimo žingsniai
- Paruoškite važiuoklę: Remove the tempered glass side panel by unscrewing the thumb screws. The front panel can be detached for easier fan/radiator installation.
Figure 3: Detachable front panel and fan bracket for simplified installation.
- Įdiekite pagrindinę plokštę: Secure your motherboard to the standoffs using the provided screws.
- Įdiekite atminties diskus: Mount 2.5" SSDs to the dedicated locations behind the motherboard tray or on the PSU shroud. Install 3.5" HDDs into the drive cages located under the PSU shroud.
- Maitinimo bloko (PSU) įrengimas: Slide the PSU into its designated compartment at the bottom rear of the chassis and secure it with screws.
- Įdiekite vaizdo plokštę (GPU): Insert your graphics card into the PCIe slot on the motherboard. The chassis supports vertical GPU mounting with an optional bracket (PH-VGPUKT4.0_03).
- Įdiekite aušinimo komponentus: The G360A supports various fan and radiator configurations.
- Ventiliatoriaus palaikymas: Front: 3x 120mm (3 pre-installed) or 2x 140mm; Top: 3x 120mm or 2x 140mm; Rear: 1x 120mm.
- Radiatoriaus palaikymas: Front: Up to 360mm or 280mm; Top: Up to 360mm; Rear: 120mm. Note: Front and top 360mm radiators cannot be installed simultaneously.
Figure 4: Detailed fan and radiator placement options for optimal cooling.
- Kabelių valdymas: Utilize the 36mm (1.4 in) cable management space behind the motherboard tray to route and secure cables for a clean build and improved airflow.
Naudojimo instrukcijos
1. Front I/O Panel Functions
The front I/O panel provides convenient access to essential controls and ports:
- Maitinimo mygtukas: Įjungia arba išjungia sistemą.
- 2 USB 3.0 prievadai: Skirta USB įrenginiams prijungti.
- Microphone/Headphone Combo Jack: Garso įvesties ir išvesties jungtims.
- D-RGB Mode Button: Cycles through pre-programmed lighting effects.
- D-RGB Color Button: Changes the color of the D-RGB lighting.
Figure 5: Front I/O panel with easy-access controls for power, USB, audio, and D-RGB lighting.
2. Digital-RGB Lighting Control
The Eclipse G360A features integrated D-RGB lighting with pre-installed 120mm D-RGB fans and an LED strip along the tempered glass panel. The lighting can be controlled in two ways:
- Rankinis valdymas: Use the D-RGB Mode and Color buttons on the front I/O panel to cycle through various effects and colors without software.
- Pagrindinės plokštės sinchronizavimas: The D-RGB controller can be connected to a compatible motherboard's D-RGB header (e.g., ASUS Aura Sync, MSI Mystic Light Sync, GIGABYTE RGB Fusion, ASRock Polychrome Sync, Razer Chroma). This allows for software control and synchronization with other D-RGB components in your system. Refer to your motherboard manual for D-RGB header location and software instructions.
Figure 6: Integrated D-RGB lighting and compatibility with major motherboard synchronization software.
Priežiūra
1. Cleaning the Ultra-fine Performance Mesh
The front panel's ultra-fine mesh acts as a dust filter. To maintain optimal airflow and prevent dust buildup, regularly clean the mesh:
- Gently detach the front panel.
- Use a soft brush or compressed air to remove accumulated dust from the mesh.
- Wipe the mesh with a slightly damp jei reikia, audinį, prieš pritvirtindami įsitikinkite, kad jis visiškai išdžiūvęs.
Figure 7: The ultra-fine performance mesh design, crucial for airflow and dust filtration.
2. General Chassis Cleaning
For general cleaning of the chassis exterior and interior:
- Įsitikinkite, kad sistema yra išjungta ir atjungta.
- Use a microfiber cloth to wipe down exterior surfaces.
- For interior dust, use compressed air to blow dust out of components and the chassis.
- Clean the tempered glass panel with a glass cleaner and a soft cloth.
Trikčių šalinimas
Bendros problemos ir sprendimai
| problema | Galima priežastis | Sprendimas |
|---|---|---|
| Sistema neįsijungia. | Loose power connections, faulty PSU, incorrect front panel header connection. | Check all power cables (24-pin, 8-pin CPU, GPU). Verify front panel power switch connection to motherboard. Test PSU if possible. |
| D-RGB lighting not working or incorrect. | Loose D-RGB cable connection, incorrect D-RGB header, software conflict. | Ensure D-RGB cables are securely connected. If using motherboard sync, verify connection to a 3-pin 5V D-RGB header (not 4-pin 12V RGB). Try manual control via case buttons. Reinstall or update motherboard RGB software. |
| Prastas oro srautas arba aukšta temperatūra. | Dust buildup, incorrect fan orientation, obstructed airflow. | Clean front mesh and other dust filters. Ensure fans are oriented correctly (intake/exhaust). Check for cable obstructions inside the case. |
| Front USB ports not functioning. | Loose USB 3.0 header cable connection to motherboard. | Verify the USB 3.0 cable from the front panel is securely connected to the motherboard's USB 3.0 header. |
Specifikacijos
| Funkcija | Detalė |
|---|---|
| Modelio pavadinimas | Eclipse G360A |
| Modelio numeris | PH-EC360ATG_DBK02 |
| Formos faktorius | Mid Tower |
| Matmenys (PxPxA) | 455 x 200 x 465 mm / 17.9 x 7.87 x 18.3 colio |
| Medžiaga (-os) | Steel Chassis, Tempered Glass |
| Pagrindinės plokštės palaikymas | ATX, micro-ATX, mini-ITX, E-ATX (up to 280mm wide) |
| Priekinė I/O | 2x USB 3.0, Microphone/Headphone Combo, Power Button, D-RGB Mode, D-RGB Color |
| Išplėtimo lizdai | 7 |
| Vidinės 3.5 colių diskų angos | 2 (2 vnt. įskaičiuoti) |
| Vidinės 2.5 colių diskų angos | 3 (2 vnt. įskaičiuoti) |
| Iš anksto įdiegti ventiliatoriai | 3x 120mm D-RGB (Front) |
| Ventiliatoriaus laikiklis (120 mm) | Front: 3x; Top: 3x; Rear: 1x |
| Ventiliatoriaus laikiklis (140 mm) | Front: 2x; Top: 2x |
| Radiator Support (120mm) | Front: Up to 360mm; Top: Up to 360mm; Rear: 120mm |
| Radiator Support (140mm) | Front: Up to 280mm; Top: Up to 360mm |
| Maksimalus GPU ilgis | 400 mm / 15.7 coliai |
| Maksimalus procesoriaus aušintuvo aukštis | 162 mm / 6.3 coliai |
| Kabelių valdymo erdvė | 36 mm / 1.4 coliai |
| Maksimalus PSU ilgis | 220 mm / 280 mm (depends on HDD Cage location) |
Garantija ir palaikymas
Informacija apie garantiją
Phanteks products are manufactured to the highest quality standards. For detailed warranty terms and conditions, please refer to the warranty card included with your product or visit the official Phanteks webGarantija paprastai taikoma medžiagų ir gamybos defektams, atsiradusiems įprasto naudojimo sąlygomis.
Pagalba klientams
Should you encounter any issues or have questions regarding your Phanteks Eclipse G360A chassis, please contact Phanteks customer support. You can find contact information, FAQs, and additional resources on the official Phanteks websvetainė:
