Įvadas
This manual provides detailed instructions for the installation, operation, and maintenance of your OREiN Smart Motion Sensor Light. This hardwired outdoor floodlight features Bluetooth APP control, 5000K LED illumination, and IP65 waterproof rating, designed to enhance your home security and convenience.
Figure 1: OREiN Smart Motion Sensor Light with App Control Interface.
This image shows the OREiN Smart Motion Sensor Light mounted on an exterior wall, highlighting its sleek design and the accompanying smartphone application interface for control.
Saugos informacija
- Elektros sauga: Installation requires hardwiring to an AC power source (110 Volts). Ensure power is turned off at the circuit breaker before beginning installation. If you are not familiar with electrical wiring, consult a qualified electrician.
- Hidroizoliacija: The product is IP65 waterproof, suitable for outdoor use. However, ensure all connections are properly sealed during installation to prevent water ingress into the wiring.
- Montavimas: The base of the light is 5.12 inches x 5.12 inches. Verify sufficient space and a secure mounting surface before installation.
- Darbinė temperatūra: Designed for outdoor conditions, but avoid extreme temperatures outside the specified operating range.
Pakuotės turinys
Prieš tęsdami montavimą, patikrinkite, ar yra visi komponentai:
- OREiN Smart Motion Sensor Light Unit (1 Head)
- Tvirtinimo detalės (varžtai, vielinės veržlės, tvirtinimo laikiklis)
- LED Beads (integrated)
- Filter Lens (integrated)
- Instrukcijų vadovas (šis dokumentas)
Figure 2: Included Mounting Hardware.
This image displays the small bag containing the necessary screws, wire nuts, and mounting bracket for installation.
Sąranka ir diegimas
Prieš montavimą kontrolinis sąrašas:
- Prieš pradėdami, įsitikinkite, kad maitinimas yra IŠJUNGTAS grandinės pertraukikliu.
- Confirm the mounting location has sufficient space (base is 5.12"x5.12").
- Gather necessary tools (screwdriver, wire strippers, sealant).
Diegimo žingsniai:
- Fix the Mounting Bracket: Secure the provided mounting bracket onto your junction box using the appropriate screws.
- Prijunkite laidus: Carefully connect the wires of the same color (live, neutral, ground) from your house wiring to the light fixture's wires using the wire nuts. Ensure connections are secure.
- Secure the Wire Connection: Use electrical tape or additional sealant around the wire nuts and connections to enhance waterproofing and prevent moisture from reaching the electrical components.
- Apsaugokite šviesą: Attach the light fixture to the mounting bracket, ensuring it is firmly in place. Plug in any waterproof plugs if applicable.
3 pav.: Diegimo procesas baigtasview.
This visual guide illustrates the four main steps for installing the OREiN Smart Motion Sensor Light, from securing the mounting bracket to the final attachment of the light fixture.
App Download and Initial Pairing:
The OREiN Smart Motion Sensor Light is controlled via a Bluetooth-enabled app. Ieškokite the "AiDot" app on your smartphone's app store (iOS or Android) and install it. Follow the in-app instructions to pair your device. The light will blink twice when it is in pairing mode.
Naudojimo instrukcijos
Rankinis valdymas:
The light features a single button for basic control. Click the button (within 1 second) to cycle through the two primary modes: Light Mode and Motion Mode. Refer to the product packaging for a detailed diagram of manual mode cycling.
Smart App Control (Recommended):
For full customization and convenience, use the AiDot app. This allows you to adjust settings without needing a ladder.
- Įjungimo / išjungimo valdymas: Remotely turn the light on or off.
- Ryškumo reguliavimas: Customize the light intensity from 0% to 100%.
- Iš anksto nustatyti režimai: Switch between three main modes:
- Judėjimo režimas: Light turns on when motion is detected and automatically turns off after a set delay time.
- Šviesos režimas: Functions as a normal light, automatically turning on during its effective time (e.g., dusk to dawn).
- Apsaugos režimas: Light deters intruders by flashing or changing color (e.g., red light flashes) when motion is sensed. This mode is primarily controlled via the app.
- Tinkinti nustatymai: Set delay times for motion mode, dim light mode percentages, and night economy mode for reduced light pollution after midnight.
- Laikmačiai: Schedule specific on/off times for the light.
- Grupės valdymas: Control multiple OREiN smart lights simultaneously via Bluetooth. Note: These lights are not compatible with Wi-Fi connection for group control.
Figure 4: Operational Modes.
This image illustrates the three primary operational modes: Motion Mode (light activates upon movement), Light Mode (continuous illumination), and Security Mode (flashing light for deterrence).
Figure 5: App Customization Interface.
This image displays the smartphone app's interface, demonstrating how users can customize the light's brightness, delay time, and effective operating hours.
Figure 6: Bluetooth Group Control.
This image illustrates the capability of controlling multiple OREiN lights simultaneously through Bluetooth, enabling synchronized lighting across different areas of a property.
Priežiūra
- Valymas: Periodiškai valykite šviestuvą minkšta,amp šluoste nešvarumams ir šiukšlėms pašalinti. Nenaudokite abrazyvinių valiklių ar tirpiklių.
- Patikra: Regularly inspect the light for any signs of damage, loose connections, or wear. Ensure the IP65 seal remains intact.
- Objektyvo skaidrumas: Keep the filter lens clear to ensure optimal light output and motion sensor performance.
Trikčių šalinimas
| Problema | Galima priežastis | Sprendimas |
|---|---|---|
| Šviesa neįsijungia. | Nėra elektros, atsilaisvinę laidai, sugedęs įrenginys. | Check circuit breaker. Verify all wire connections are secure. If issues persist, contact support. |
| Judesio jutiklis neaptinka. | Obstruction, incorrect sensitivity setting, sensor dirty. | Clear any obstructions. Adjust sensitivity in the app. Clean the sensor lens. |
| Programėlės ryšio problemos. | Bluetooth interference, light not in pairing mode, app outdated. | Ensure Bluetooth is enabled on your device. Restart the light. Update the AiDot app. Ensure you are within Bluetooth range. |
| Light flashes unexpectedly. | Security Mode activated, electrical fluctuation. | Check app settings to ensure Security Mode is not enabled. Consult an electrician if electrical issues are suspected. |
Specifikacijos
| Funkcija | Detalė |
|---|---|
| Prekės ženklas | OREiN |
| Modelio numeris | OL1900156 |
| Spalva | Juoda |
| Stilius | Modernus |
| Šviestuvo forma | Siena |
| Naudojimas viduje / lauke | Lauke |
| Maitinimo šaltinis | Laidinis (AC) |
| Diegimo tipas | Floor Mount (also supports Wall/Soffit) |
| Kontrolės metodas | Programėlė („Bluetooth“) |
| Šviesos šaltinio tipas | LED |
| Atspalvio medžiaga | Polikarbonatas |
| Šviesos šaltinių skaičius | 1 |
| ttage | 110 voltai (kintamoji srovė) |
| Šviesos spalvos temperatūra | 5000K (balta) |
| Vattage | 5.5 vatų |
| Jungiklio tipas | Judesio jutiklis |
| Atsparumo vandeniui lygis | IP65 Atsparus vandeniui |
| Ryškumas | 720 liumenų |
| Prekės svoris | 1.06 svaro |
| Gaminio matmenys | 4.3 x 4.3 x 4.7 colio |
Garantija ir palaikymas
OREiN provides comprehensive support for its products:
- Garantija: The OREiN Smart Motion Sensor Light comes with a 24 mėnesių garantija.
- Pagalba internete: Mėgaukitės 7*24 hours online help for any using issues.
- Call Support: Call support is available during working hours at 1-844-506-1530.
- Grąžinimai: You can return any item purchased through Amazon's logistics. However, OREiN suggests contacting them before returning for potential direct resolution.
- Susisiekite: For any inquiries, contact OREiN directly on Amazon or search for their brand online.