Sinotimer Digital Programmable Timer TM618N-2 User Manual

1. Produktas baigtasview

The Sinotimer TM618N-2 is a versatile 7-day weekly digital programmable timer designed for automated control of electrical equipment. It allows users to set specific daily or weekly schedules for turning devices on and off, ensuring efficient energy management and convenience. This timer is suitable for a wide range of applications, including controlling lighting, heating, ventilation, and other electrical appliances.

1 pav.: priekis view of the Sinotimer TM618N-2 Digital Timer, showing the display and control buttons.

2. Pagrindinės savybės

• Savaitinis programavimas: Allows up to 16 ON/OFF programs per day or week.
• Daugiafunkcinis: Includes Clock display, Timer, Countdown, Automatic weekly time deviation correction, and Sleep mode.
• Didelė talpa: Palaiko 16 Amp / 220 Volt AC loads.
• Platus ttage Suderinamumas: Operates with 220V, 230V, 240V AC.
• Integruota baterija: Išsaugo nustatymus išjungus maitinimątages (Lithium battery type).
• Universalios programos: Ideal for controlling dryers, defrosting equipment, swimming pool pumps, gates, lighting, and more.

3. Specifikacijos

4. Montavimas

Svarbus saugos pranešimas: Installation should only be performed by a qualified electrician. Ensure power is disconnected before attempting any wiring.

1. Montavimas: The TM618N-2 is designed for DIN rail mounting or screw mounting. Secure the timer in a suitable electrical enclosure.
2. Laidai: Refer to the wiring diagram on the back of the unit.
   

   2 pav.: Nugara view of the Sinotimer TM618N-2, showing input/output terminals and wiring diagram.

   • Input (Terminals 1 & 2): Connect your 200-250VAC power supply to these terminals.
   • Output (Terminals 3, 4, & 5):
     • 3 terminalas: Bendras (COM)
     • Terminal 4: Normally Open (NO) - Connect your load here for switched power.
     • Terminal 5: Normally Closed (NC) - (Less commonly used for timer applications, but available).
3. Maitinimas: Once wiring is complete and secure, restore power to the circuit. The timer display should illuminate.

Figure 3: Technical drawing showing the dimensions of the Sinotimer TM618N-2 timer.

5. Naudojimo instrukcijos

5.1. Mygtukų funkcijos

• LAIKRODIS: Naudojamas dabartiniam laikui ir dienai nustatyti.
• PROGRAMA: Enters/exits programming mode for ON/OFF schedules.
• SAVAITĖ: Selects the day(s) of the week during time or program setting.
• VALANDA: Adjusts the hour during time or program setting.
• MIN.: Adjusts the minute during time or program setting.
• PRISIMINTI: Recalls or cancels a program setting.
• VADOVAS: Manually overrides the timer's current state (ON/AUTO/OFF).
• R (Reset): Small button (requires a pointed object) to reset the timer to factory defaults.

5.2. Dabartinio laiko ir dienos nustatymas

1. Paspauskite ir palaikykite LAIKRODIS mygtuką.
2. Laikant LAIKRODIS, paspauskite SAVAITĖ to set the current day (MO, TU, WE, TH, FR, SA, SU).
3. Laikant LAIKRODIS, paspauskite VALANDA norėdami nustatyti dabartinę valandą.
4. Laikant LAIKRODIS, paspauskite MIN norėdami nustatyti dabartinę minutę.
5. Atleiskite LAIKRODIS mygtuką, kad išsaugotumėte nustatymus.

5.3. Įjungimo/išjungimo tvarkaraščių programavimas

The timer supports up to 16 ON and 16 OFF programs. Each program can be set for a specific day or group of days.

1. Paspauskite PROG mygtuką vieną kartą. Ekrane bus rodoma „1 ON“.
2. Paspauskite SAVAITĖ repeatedly to select the desired day(s) for this program (e.g., MO, TU, WE, TH, FR, SA, SU; MO-FR; SA-SU; MO-SA; etc.).
3. Paspauskite VALANDA , kad nustatytumėte norimą ĮJUNGIMO valandą.
4. Paspauskite MIN , kad nustatytumėte norimą įjungimo minutę.
5. Paspauskite PROG dar kartą. Ekrane bus rodoma „1 OFF“.
6. Repeat steps 2-4 to set the desired OFF time for the first program.
7. Paspauskite PROG to move to the next program ("2 ON", "2 OFF", etc.) and repeat the process for up to 16 programs.
8. To exit programming mode and save settings, press the LAIKRODIS mygtuką.

5.4. Rankinis nepaisymas

Paspauskite VADOVAS button to cycle through the output modes:

• ĮJUNGTA: Output is continuously ON, ignoring programs.
• AUTOMATINIS: Output follows the programmed schedules.
• IŠJUNGTA: Output is continuously OFF, ignoring programs.

Įsitikinkite, kad laikmatis įjungtas AUTO mode for programmed operation.

5.5. Laikmačio nustatymas iš naujo

To clear all settings and return the timer to its factory default state, insert a pointed object (like a paperclip) into the small R (Reset) hole and press gently.

6. Priežiūra

The Sinotimer TM618N-2 requires minimal maintenance.

• Laikykite įrenginį švarų ir be dulkių. Valymui naudokite minkštą, sausą šluostę.
• Nenaudokite abrazyvinių valiklių ar tirpiklių.
• Ensure the timer is installed in a dry environment, away from direct moisture or extreme temperatures.
• The internal battery is designed for long life and is not user-replaceable. If the display goes blank or settings are not retained after a power outage, the battery may need professional service.

7. Problemų sprendimas

8. Garantija ir palaikymas

Dėl garantijos informacijos ir techninės pagalbos žr. kartu su pirkiniu pateiktus dokumentus arba susisiekite su pardavėju. Išsaugokite pirkimo įrodymą, jei galėtumėte pateikti garantijos pretenzijas.

Manufacturer: Sinotimer