NEOECO daugiafunkcio aerografo rinkinio naudojimo instrukcija

1. Įvadas

Thank you for choosing the NEOECO Multi-Purpose Airbrush Kit. This manual provides essential information for the proper setup, operation, and maintenance of your airbrush kit. Please read it thoroughly before first use to ensure optimal performance and longevity of your product.

This high-performance dual-action gravity feed airbrush kit is designed for a wide range of applications, including hobbies, models, crafts, nail art, makeup, automotive purposes, tattoos, taxidermy, photo retouching, t-shirts, murals, fine art, illustrations, and cake decorating.

2. Pakuotės turinys

Your NEOECO Multi-Purpose Airbrush Kit includes the following components:

• High-performance dual-action airbrush
• 3 detachable fluid cups (9cc, 20cc, 40cc)
• 3 nozzle sets (0.2mm, 0.3mm, & 0.5mm needles, fluid tips, and air caps)
• 2 differently shaped nozzle caps (crown cap, round cap)
• Drėgmės gaudyklė
• 6 pėdų pinta oro žarna
• Valymo šepečiai
• Cleaning needles
• Quick disconnect coupler
• O žiedų komplektas
• Gold reamer
• Vartotojo vadovas

Vaizdas: Išsamus view of all components included in the NEOECO Airbrush Kit, laid out with labels.

3. Sąrankos instrukcijos

1. Išpakuokite komponentus: Carefully remove all items from the packaging and verify against the package contents list.
2. Prijunkite oro žarną: Attach one end of the 6-foot braided air hose to your air compressor and the other end to the quick disconnect coupler on the airbrush. Ensure all connections are secure to prevent air leaks.
3. Install Fluid Cup: Select the desired fluid cup (9cc, 20cc, or 40cc) and securely attach it to the top of the airbrush.
4. Select Nozzle Set: Choose the appropriate nozzle set (0.2mm, 0.3mm, or 0.5mm) based on your painting needs and install it carefully. The 0.3mm set is typically pre-installed.
5. Attach Nozzle Cap: Screw on either the crown nozzle cap or the round nozzle cap. The crown cap helps decrease paint build-up and spitting, while the round cap provides protection.
6. Pradinis valymas: Before first use, it is recommended to flush the airbrush with clean water or airbrush cleaner to remove any manufacturing residues.

4. Naudojimo instrukcijos

4.1. Pagrindinė operacija

• Maitinimas: Ensure your air compressor is turned on and connected to the airbrush.
• Add Paint: Pour properly thinned paint into the fluid cup.
• Activate Air: Press the lever down to activate the airflow.
• Activate Paint: While holding the lever down, pull it backwards to activate paint flow. The further back you pull, the more paint will be released.
• Adjust Air-Paint Ratio: Use the pressure control valve under the airbrush and the paint control mechanism at the tail to fine-tune the air-paint mixture.
• Adjust Trigger Sensitivity: The gold ring in the middle allows you to finely adjust the trigger tightness for desired sensitivity.

Image: Illustration of the airbrush's control features, including pressure adjust knob, trigger tightness adjust knob, and air output adjust knob.

Image: Comparison of the Crown Nozzle Cap, which decreases paint build-up, and the Round Nozzle Cap, which provides protective cover.

Vaizdas: pvzamples of the airbrush being used for nail art, cake decorating, and toy model painting.

4.2. Advanced Techniques

For detailed instructions on creating various strokes and effects, refer to the official NEOECO YouTube channel linked in the "Support" section.

5. Priežiūra ir valymas

Regular cleaning and maintenance are crucial for the longevity and optimal performance of your airbrush. The cut-away handle allows for quick flushing and cleaning of air passages.

5.1. Quick Cleaning

1. Empty any remaining paint from the fluid cup.
2. Add a small amount of airbrush cleaner or appropriate solvent to the cup.
3. Spray the cleaner through the airbrush until it runs clear.
4. Block the needle cap with your finger to create backflow, allowing bubbles to clean the inside of the cup and nozzle.

5.2. Giluminis valymas

For thorough cleaning, especially after using thicker paints or if the airbrush is clogged:

1. Disassemble the airbrush components (nozzle, needle, fluid cup, handle).
2. Use the provided cleaning brushes and needles to clean all internal passages and components. The gold reamer can be used for stubborn clogs in the nozzle.
3. Soak components in airbrush cleaner if necessary.
4. Rinse all parts with clean water and allow to dry completely before reassembly.
5. Inspect O-rings for wear and replace if necessary using the included O-ring set.

Vaizdas: Stambus planas view of the airbrush nozzle and the cut-away handle, highlighting features that aid in cleaning and maintenance.

6. Problemų sprendimas

For more detailed troubleshooting guides, please visit the NEOECO online web arba „YouTube“ kanalą.

7. Specifikacijos

• Modelio numeris: NCT-SJ81S3-T
• Gaminio matmenys: 5.83 x 0.98 x 2.36 colio
• Prekės svoris: 1.08 svaro
• Gamintojas: NEOECO
• Kilmės šalis: Kinija
• Needle/Nozzle Sizes: 0.2 mm, 0.3 mm, 0.5 mm
• Fluid Cup Capacities: 9cc, 20cc, 40cc

8. Garantija

Each NEOECO airbrush kit undergoes rigorous testing by our inspection department to ensure it arrives in good working condition. We stand by the quality of our products.

For any issues or concerns, please contact our customer support. We are committed to providing a quick reply and resolution to any problems you may encounter.

9. Parama

For additional resources, expert advice, and further assistance, please utilize our online resources:

• Oficialus Websvetainė: www.neoeco-airbrush.com
• „YouTube“ kanalas: Access our channel for comprehensive airbrushing tutorials, first exercise guides, cleaning guides, accessory introductions, and troubleshooting solutions.
• Klientų aptarnavimas: For direct support, please refer to the contact information provided on our official websvetainę.