XPG Levante X 360 All-in-One ARGB CPU Liquid Cooler

1. Įvadas

The XPG Levante X 360 is an All-in-One (AIO) ARGB CPU Liquid Cooler designed to provide efficient and reliable thermal management for high-performance CPUs. This cooler features a 360mm radiator equipped with three 120mm Fluid Dynamic Bearing (FDB) ARGB fans and an Asetek-powered pump, ensuring optimal heat dissipation and quiet operation. This manual provides essential information for the proper installation, operation, and maintenance of your XPG Levante X 360 liquid cooler.

Image 1.1: XPG Levante X 360 All-in-One ARGB CPU Liquid Cooler. This image displays the complete liquid cooler unit, including the 360mm radiator, three 120mm ARGB fans, and the pump/cold plate assembly with braided tubing.

2. Pakuotės turinys

Verify that all components are present and in good condition before proceeding with installation.

• XPG Levante X 360 CPU Liquid Cooler (Radiator, Pump, Tubing, 3x 120mm ARGB Fans)
• Mounting Bracket Kit for Intel (LGA 1700, 1200, 115X, 2066, 2011-3, 2011)
• Mounting Bracket Kit for AMD (AM5, AM4, TR4)
• Fan Screws and Radiator Screws
• ARGB Controller/Cables
• Terminė pasta (iš anksto užtepta arba tūbelėje)
• Vartotojo vadovas (šis dokumentas)

Image 2.1: Package contents. This image shows the radiator with fans, pump, various mounting brackets, screws, and cables included in the box.

3. Saugos informacija

Please read and understand the following safety precautions before installing or operating the XPG Levante X 360 liquid cooler.

• Maitinimo atjungimas: Prieš atlikdami bet kokius diegimo ar priežiūros darbus, visada atjunkite kompiuterį nuo maitinimo.
• Elektrostatinė iškrova (ESD): Take precautions against ESD by grounding yourself before handling components.
• Skysčių tvarkymas: While the cooler is a sealed unit, handle it with care to prevent damage to the tubing or radiator, which could lead to leaks.
• Astrus kampai: Be aware of sharp edges on computer cases and cooler components during installation.
• Vėdinimas: Ensure adequate airflow within your computer case for optimal cooling performance.
• Suderinamumas: Verify compatibility with your CPU socket and computer case before installation.

4. Sąranka ir diegimas

The XPG Levante X 360 is designed for hassle-free installation. Follow these steps carefully for proper setup.

4.1 Sistemos paruošimas

1. Išjunkite kompiuterį ir atjunkite visus laidus.
2. Atidarykite kompiuterio korpusą, kad pasiektumėte pagrindinės plokštės ir procesoriaus sritį.
3. Nuimkite visus esamus procesoriaus aušintuvus. Kruopščiai nuvalykite procesoriaus paviršių, kad pašalintumėte seną terminę pastą.

4.2 Įdiekite tvirtinimo įrangą

Select the appropriate mounting bracket for your CPU socket (Intel or AMD). The cooler supports LGA 1700, 1200, 115X, 2066, 2011-3, 2011 for Intel, and AM5, AM4, TR4 for AMD.

1. Attach the correct backplate to the rear of your motherboard (for Intel sockets). AMD AM4/AM5 typically uses the stock backplate.
2. Secure the standoffs to the motherboard through the CPU cooler mounting holes.
3. Attach the chosen CPU bracket to the pump head.

Image 4.1: Key features highlighting support for LGA 1700 and AM5 sockets, along with low noise fan, aluminum radiator, high quality low noise pump, and hassle-free installation.

4.3 Mount the Radiator and Fans

Determine the optimal mounting location for the 360mm radiator within your case (e.g., front, top).

1. If not pre-attached, mount the three 120mm ARGB fans to the radiator using the provided fan screws. Ensure correct airflow direction (intake or exhaust) based on your case's ventilation strategy.
2. Secure the radiator assembly to your chosen mounting location in the PC case using the longer radiator screws.

4.4 Install the Pump Head

Carefully place the pump head onto the CPU, aligning the mounting holes with the standoffs.

1. If thermal paste is not pre-applied, apply a small pea-sized amount to the center of the CPU's integrated heat spreader (IHS).
2. Place the pump head onto the CPU, ensuring even contact.
3. Tighten the thumbscrews or nuts in a diagonal pattern until snug. Do not overtighten.

4.5 Prijunkite kabelius

Connect the pump and fan cables to your motherboard or ARGB controller.

• Connect the pump's 3-pin or 4-pin power cable to the motherboard's CPU_FAN or AIO_PUMP header.
• Connect the 4-pin PWM fan cables from the three 120mm fans to available fan headers on your motherboard or to a fan hub/controller.
• Connect the ARGB cables from the fans and pump head to an ARGB header on your motherboard (5V 3-pin) or to the included ARGB controller.

Image 4.2: The XPG Levante X 360 cooler installed inside a computer case, showcasing the illuminated pump head and ARGB fans.

5. Naudojimo instrukcijos

Once installed, the XPG Levante X 360 operates automatically to cool your CPU.

• Pradinis įjungimas: After installation, power on your computer. The pump and fans should start operating. Check for any unusual noises or leaks.
• Ventiliatoriaus ir siurblio valdymas: The 4-pin PWM fans and pump allow for speed control via your motherboard's BIOS/UEFI settings or dedicated software. Adjust fan curves to balance cooling performance and noise levels.
• ARGB apšvietimas: The Addressable RGB (ARGB) lighting on the fans and pump head can be controlled via your motherboard's ARGB software (e.g., ASUS Aura Sync, MSI Mystic Light Sync, GIGABYTE RGB Fusion, ASRock Polychrome Sync) or through the included ARGB controller.

5.1 pav.: Stambus planas view of the XPG Levante X 360's ARGB fans and pump, illustrating the vibrant lighting effects.

6. Priežiūra

Regular maintenance helps ensure optimal performance and longevity of your liquid cooler.

• Dulkių šalinimas: Periodically clean dust from the radiator fins and fan blades using compressed air or a soft brush. Excessive dust can impede airflow and reduce cooling efficiency.
• Patikrinkite vamzdelius: Occasionally check the tubing for any signs of kinks, cracks, or leaks.
• Ventiliatoriaus veikimas: Ensure all fans are spinning freely and quietly. Replace any fans that become excessively noisy or stop functioning.
• Siurblio veikimas: Listen for any unusual noises from the pump. A properly functioning pump should operate quietly.

7. Problemų sprendimas

If you encounter issues with your XPG Levante X 360, refer to the following common problems and solutions.

8. Specifikacijos

Detailed technical specifications for the XPG Levante X 360 All-in-One ARGB CPU Liquid Cooler.

• Modelis: LEVANTEX360-BKCWW
• Aušintuvo tipas: All-in-One Liquid CPU Cooler
• Radiator Size: 360 mm
• Ventiliatoriaus dydis: 120 mm (x3)
• Ventiliatoriaus tipas: ARGB Fluid Dynamic Bearing (FDB) Fans
• Ventiliatoriaus jungtis: 4-Pin PWM
• Maksimalus sukimosi greitis: 2000 aps./min
• Oro srauto talpa: 61.5 kubinių pėdų per minutę (CFM)
• Triukšmo lygis: 18.17 decibelai (dBA)
• Siurblio tipas: Asetek-powered High-Performance Pump
• Siurblys ttage: 12 voltų
• Aušinimo būdas: Skystis
• Medžiaga: Aluminum (Radiator), Copper (Cold Plate)
• Compatible CPU Sockets:
  • Intel: LGA 1700, 1200, 115X, 2066, 2011-3, 2011
  • AMD: AM5, AM4, TR4
• Gaminio matmenys (pakuotė): 18.9 x 5.91 x 7.48 colio
• Prekės svoris: 4.71 svaro
• UPC: 842243029062
• Gamintojas: Adata

Image 8.1: Graph illustrating the relationship between PWM duty cycle, fan speed (RPM), fan air flow (CFM), and fan noise (dBA) for the XPG Hurricane 120 ARGB PWM fans.

9. Garantija ir palaikymas

XPG products are manufactured to the highest quality standards. For warranty information, technical support, or service inquiries, please refer to the official XPG websvetainėje arba susisiekite su jų klientų aptarnavimo tarnyba. Išsaugokite pirkimo įrodymą garantiniams reikalavimams.

Official XPG Websvetainė: www.xpg.com