1. Įvadas
The iKiKin AP-8 Head Up Display (HUD) is a multi-function smart gauge designed to provide real-time vehicle data directly in your line of sight. It integrates OBD2, GPS, and Slope Meter functionalities to offer comprehensive driving information and safety warnings. This manual provides detailed instructions for installation, operation, and troubleshooting to ensure optimal use of your device.
Image 1.1: The iKiKin AP-8 Head Up Display showing speed, RPM, fuel consumption, and temperature.
Image 1.2: The iKiKin AP-8 is compatible with a wide range of vehicles, including new energy vehicles, buses, trucks, bicycles, scooters, and motorcycles.
2. Sąranka ir diegimas
The iKiKin AP-8 offers a plug-and-play installation process. Follow these steps to set up your device:
- Locate the OBD2 Interface: The OBD2 interface is typically located on the driver's side, approximately 30 cm from the middle of the instrument panel.
- Connect the OBD Cable: Turn the vehicle ignition off. Connect one end of the provided OBD cable to the vehicle's OBD2 interface.
- Connect to Smart Gauge: Connect the other end of the OBD cable to the Smart Gauge (HUD).
- Kabelio maršrutas: Carefully hide the OBD cable in the A-pillar or along the dashboard for a neat installation.
- Maitinimas: Turn the vehicle ignition on. The HUD should power on automatically.
Image 2.1: Installation diagram showing the OBD2 port location, cable connection, and routing.
2.1 Pakuotės turinys
Įsitikinkite, kad pakuotėje yra visi komponentai:
- iKiKin AP-8 OBD2 Gauge
- OBD2 laidas
- Vartotojo vadovas (šis dokumentas)
- Velcro Sticker (for mounting)
- Hexagon Wrench (for adjustment)
3. Naudojimo instrukcijos
The iKiKin AP-8 features multiple display interfaces and operating modes to suit various driving needs.
3.1 Display Modes: OBD2, GPS, and Slope Meter
The device supports three primary data acquisition systems:
- OBD2 Mode: Connects to your vehicle's On-Board Diagnostics system to display engine-related data.
- GPS režimas: Uses satellite signals to display speed, time, and other location-based data.
- Slope Meter: Measures the vehicle's roll and pitch angles, useful for off-road driving.
Image 3.1: The AP-8 integrates OBD2, GPS, and Slope Meter functionalities, offering diverse display options.
3.2 Switching to GPS Mode
To switch from OBD2 mode to GPS mode:
- From the normal display interface, long press the [OK] button for 5 seconds norėdami įvesti nustatymus.
- Trumpai paspauskite Kairysis arba dešinysis mygtukas to navigate to 'Settings', then short press the [OK] mygtukas įeiti.
- Trumpai paspauskite Kairysis mygtukas to choose 'OBD Switch', then short press the [OK] mygtukas įeiti.
- Trumpai paspauskite Kairysis mygtukas to change the setting to 'Close', then short press the [OK] mygtukas išsaugoti.
- Long press the [OK] button for 5 seconds to return to the upper menu or exit settings. The device will now operate in GPS mode.
3.3 OBD2 Display Items
In OBD2 mode, the HUD can display up to 11 types of vehicle data:
- Greitis
- ttage
- Vandens temperatūra
- RPM (apsukimai per minutę)
- Kuro sąnaudos
- Važiavimo atstumas
- Vairavimo laikas
- Įsiurbiamo oro temperatūra
- Alyvos temperatūra
- Turbine Pressure
- Alyvos slėgis
- PID List (Parameter IDs)
Image 3.2: Visual representation of the OBD2 data items available on the display.
3.4 GPS Display Items
In GPS mode, the HUD provides navigation and location-based data:
- GPS greitis
- Vairavimo kryptis
- Water Temperature (if available via GPS data)
- Aukštis virš jūros lygio
- GPS laikas
- Palydovo numeris
- Accurate Position (Latitude/Longitude)
- ttage (if available via GPS data)
Image 3.3: Visual representation of the GPS data items available on the display.
3.5 Slope Meter Function
The integrated slope meter provides real-time information on your vehicle's tilt angles, which is particularly useful for off-road driving or navigating uneven terrain.
- Ritimo kampas: Indicates the vehicle's side-to-side tilt.
- Pitch Angle: Indicates the vehicle's front-to-back tilt (uphill/downhill).
Image 3.4: The Slope Meter interface showing real-time roll and pitch angles.
3.6 Performance Tests
The AP-8 HUD includes functions for performance testing:
- Pagreičio bandymas: Measures the time taken to accelerate from 0 to 100 KM/H.
- Stabdžių testas: Measures the braking distance and time when stopping from 100 KM/H.
Image 3.5: Acceleration Test Interface.
Image 3.6: Brake Test Interface.
3.7 Ekrano sąsajos
The AP-8 offers 11 distinct display interfaces, allowing you to customize the information presented. You can switch between these interfaces to view different combinations of data.
Image 3.7: Display Interfaces 1-4.
Image 3.8: Display Interfaces 5-8.
Image 3.9: Display Interfaces 9-11.
3.8 produkto vaizdo įrašas
3.1 vaizdo įrašas: metimas per sekundęview of the iKiKin Upgrade Car HUD Head Up Display Digital Speedometer, demonstrating its various display modes and features in action.
4. Priežiūra
To ensure the longevity and optimal performance of your iKiKin AP-8 HUD, follow these maintenance guidelines:
- Valymas: Use a soft, dry cloth to clean the display screen and device body. Avoid abrasive cleaners or solvents that could damage the surface.
- Temperatūra: Do not expose the device to extreme temperatures (hot or cold) for extended periods, as this can affect its electronic components.
- Drėgmė: Keep the device dry. Avoid contact with water or other liquids.
- Saugykla: When not in use for a long time, store the device in a cool, dry place away from direct sunlight.
5. Problemų sprendimas
If you encounter issues with your iKiKin AP-8 HUD, refer to the following troubleshooting steps:
5.1 Gedimų kodų skaitymas ir ištrynimas
The HUD can read and clear diagnostic trouble codes (DTCs) from your vehicle's OBD2 system:
- Navigate to the 'Scan DTC' option in the settings menu.
- Trumpai paspauskite [OK] mygtukas to display detailed DTCs.
- Follow on-screen prompts to clear codes if necessary.
Image 5.1: Reading a detailed fault code on the HUD.
5.2 Gamyklinių nustatymų atkūrimas
If the device is not functioning as expected or you wish to reset all settings:
- Navigate to 'Restore Settings' in the settings menu.
- Paspauskite [OK] mygtukas. The screen will show 'RESET'.
- Trumpai paspauskite Kairysis mygtukas to confirm. The OBD Gauge will restart, indicating the factory reset is complete.
Image 5.2: Restoring the device to factory settings.
5.3 Bendros problemos
- Nėra ekrano: Ensure the OBD2 cable is securely connected to both the vehicle's port and the HUD. Check if the vehicle's ignition is on.
- Netikslus greičio rodmuo: If in GPS mode, ensure a clear view of the sky for satellite reception. If in OBD2 mode, check vehicle settings or perform a factory reset.
- Įrenginys užšąla: Disconnect the OBD2 cable, wait 10 seconds, and reconnect it. If the issue persists, perform a factory reset.
6. Specifikacijos
| Funkcija | Specifikacija |
|---|---|
| Modelis | AP-8 |
| Pakuotės matmenys | 6.22 x 4.57 x 3.07 colio |
| Prekės svoris | 12.3 uncijos |
| Prekės ženklas | iKiKin |
| UPC | 724873557811 |
| ASIN | B0BCYWC1FR |
| Pasiekiama pirmoji data | 3 m. rugsėjo 2022 d |
7. Garantija ir palaikymas
Specific warranty information and detailed support contacts are not provided in this manual. Please refer to the product packaging or the official iKiKin websvetainėje, kurioje rasite naujausias garantijos sąlygas ir klientų aptarnavimo galimybes.
