Hiditec PSX500W 500W ATX Power Supply User Manual

1. Įvadas

Thank you for choosing the Hiditec PSX500W 500W ATX Power Supply. This manual provides essential information for the safe installation, operation, and maintenance of your power supply unit. Please read this manual thoroughly before installation and retain it for future reference.

2. Saugos informacija

Improper installation or use can lead to equipment damage or personal injury. Always follow these safety guidelines:

• Prieš montuodami ar atlikdami techninę priežiūrą, įsitikinkite, kad maitinimo šaltinis yra atjungtas nuo pagrindinio maitinimo lizdo.
• Neatidarykite maitinimo šaltinio c.asing. Didelis tūristagVidiniai komponentai gali sukelti elektros smūgį.
• Install the power supply in a well-ventilated area. Do not block ventilation openings.
• This power supply is designed for use with 230V AC input at 50Hz. It is not compatible with 110-120V AC input or 60Hz frequencies commonly found in North America. Using this power supply with incompatible voltage or frequency will cause damage to the unit and potentially other components.
• Saugokite maitinimo šaltinį nuo drėgmės ar ekstremalių temperatūrų.
• Use only the cables provided or approved by the manufacturer.

3. Pakuotės turinys

Patikrinkite, ar pakuotėje yra visi reikalingi daiktai:

• Hiditec PSX500W 500W ATX Power Supply Unit
• AC Power Cable (EU plug type, 230V/50Hz compatible)
• Tvirtinimo varžtai
• Vartotojo vadovas (šis dokumentas)

4. Produktas baigtasview

The Hiditec PSX500W is a 500W ATX power supply designed to provide stable power to your personal computer components.

1 pav.: galinis view of the Hiditec PSX500W Power Supply. This image displays the AC power input socket, the power switch, and the ventilation grille. The label "AC 230V" is clearly visible next to the power input, indicating its voltage reikalavimas.

2 paveikslas: viršuje view of the Hiditec PSX500W Power Supply. This image shows the large cooling fan, which is essential for heat dissipation, and the various power cables bundled together, ready for connection to PC components.

5. Sąranka ir diegimas

Before proceeding, ensure your computer system is completely powered off and disconnected from any power source. It is recommended to wear an anti-static wrist strap during installation.

1. Patikrinkite maitinimo suderinamumą: Confirm that your region uses 230V AC power at 50Hz. This power supply is not designed for 110-120V AC / 60Hz systems.
2. Maitinimo bloko montavimas: Carefully slide the power supply into the designated PSU bay in your computer case. Align the screw holes and secure the PSU with the provided mounting screws.
3. Prijunkite pagrindinės plokštės maitinimą: Connect the 20+4 pin ATX main power connector to your motherboard. Ensure it clicks securely into place.
4. Prijunkite procesoriaus maitinimą: Connect the 4+4 pin EPS/ATX 12V connector to the CPU power socket on your motherboard.
5. Prijunkite periferinį maitinimą: Prijunkite SATA maitinimo jungtis prie savo atminties įrenginių (HDD, SSD) ir optinių diskų. Prijunkite „Molex“ jungtis prie visų kitų periferinių įrenginių, kuriems jų reikia.
6. Prijunkite vaizdo plokštės maitinimą (jei taikoma): If your graphics card requires additional power, connect the appropriate PCIe power connectors from the PSU.
7. Kabelių valdymas: Tvarkingai išvedžiokite laidus, kad pagerintumėte oro cirkuliaciją ir pagerintumėte estetiką korpuse.
8. Galutinis patikrinimas: Double-check all connections to ensure they are firm and correctly seated.

6. Naudojimo instrukcijos

After successful installation, follow these steps to power on your system:

1. Connect the provided AC power cable to the power supply's input socket and then to a compatible 230V/50Hz wall outlet.
2. Flip the power switch on the back of the PSU to the "ON" (I) position.
3. Norėdami paleisti sistemą, paspauskite kompiuterio korpuso maitinimo mygtuką.
4. To power off, shut down your operating system normally, then flip the PSU power switch to the "OFF" (O) position if you wish to completely cut power.

7. Priežiūra

Tinkama priežiūra užtikrina jūsų maitinimo šaltinio ilgaamžiškumą ir optimalų veikimą:

• Dulkių šalinimas: Periodically clean the power supply's fan and ventilation grilles using compressed air. Ensure the system is powered off and unplugged before cleaning.
• Vėdinimas: Ensure that the computer case has adequate airflow and that the PSU's fan is not obstructed.
• Aplinkos sąlygos: Operate the power supply within its specified temperature and humidity ranges.

8. Problemų sprendimas

Jei kyla problemų dėl maitinimo šaltinio, vadovaukitės toliau pateiktais įprastais trikčių šalinimo veiksmais.

• Nėra galios:
  • Įsitikinkite, kad kintamosios srovės maitinimo laidas yra tvirtai prijungtas prie maitinimo bloko ir sieninio lizdo.
  • Verify the power switch on the PSU is in the "ON" (I) position.
  • Check if the wall outlet is functioning correctly by plugging in another device.
  • Crucial: Confirm that the power supply is connected to a 230V/50Hz power source. This unit is not compatible with 110-120V/60Hz regions. Incorrect voltage will prevent the unit from functioning or cause damage.
• Sistema nepaleidžiama:
  • Ensure all power connectors (20+4 pin ATX, 4+4 pin CPU, PCIe, SATA) are firmly seated.
  • Temporarily disconnect non-essential peripherals to rule out component conflicts.
• Neįprasti garsai:
  • A rattling noise might indicate a loose screw or component.
  • A grinding noise could suggest a fan issue. If the fan is making excessive noise, ensure it is free from obstructions and clean.

If problems persist after following these steps, contact Hiditec customer support or a qualified technician.

9. Specifikacijos

10. Garantija ir palaikymas

For warranty information or technical support, please refer to the documentation provided with your purchase or visit the official Hiditec websvetainėje. Išsaugokite pirkimo įrodymą garantiniams reikalavimams.