JATRHG Portable EV Charger Type 2 (7.2KW, 32A) Instruction Manual

1. Įvadas

Thank you for choosing the JATRHG Portable EV Charger. This manual provides essential information for the safe and efficient operation of your new electric vehicle charging device. Please read this manual thoroughly before use and retain it for future reference.

The JATRHG Portable EV Charger is designed for convenient and flexible charging of electric vehicles equipped with a Type 2 charging port. It offers selectable current levels and robust safety features to ensure a reliable charging experience.

2. Svarbi saugos informacija

Always observe the following safety precautions to prevent injury, damage to the product, or damage to your vehicle.

• Ensure the charging cable and connector are free from damage before each use. Do not use if any part is damaged.
• Do not attempt to open, disassemble, or modify the charger. This may cause electric shock, fire, or other hazards.
• Keep the charger away from water, flammable materials, and extreme temperatures. Although the casing is waterproof, avoid submerging the control box.
• Ensure the power outlet used is properly grounded and rated for the selected charging current. Consult a qualified electrician if unsure.
• Do not force the connector into the vehicle's charging port. Ensure proper alignment.
• Always disconnect the charger from the power source before attempting any cleaning or maintenance.
• The charger is equipped with advanced safety features including over-voltage, pagal ttage, leakage, and over-temperature protection. If a fault occurs, the charger will automatically stop charging.
• Monitor the charger and connection points during charging, especially when using higher current settings, to ensure no excessive heat buildup.

3. Pakuotės turinys

Patikrinkite, ar pakuotėje yra visi reikalingi daiktai:

• JATRHG Portable EV Charger Control Box with integrated cable and Type 2 Connector
• Power Plug (e.g., CEE 7/7 Schuko or industrial plug, depending on region)
• Vartotojo vadovas
• Nešiojimo krepšys

4. Produktas baigtasview

The JATRHG Portable EV Charger consists of the following main components:

• Valdymo langelis: Houses the intelligent charging electronics, LED indicator, and control buttons for current selection and schedule settings.
• 2 tipo jungtis: The standard European connector (IEC 62196-2) for connecting to your electric vehicle.
• Įkrovimo kabelis: An 8-meter long TPU cable connecting the control box to the Type 2 connector, designed for durability and flexibility.
• Maitinimo kištukas: Connects the charger to a suitable wall outlet.

5. Sąranka

1. Pasirinkite vietą: Select a dry, well-ventilated area for charging, away from direct sunlight or rain. Ensure the charging cable can reach your vehicle without being stretched or creating a tripping hazard.
2. Patikrinkite įkroviklį: Before each use, visually inspect the control box, cable, and connectors for any signs of damage, cracks, or wear. Do not use the charger if any damage is observed.
3. Prijunkite prie maitinimo: Insert the power plug firmly into a suitable, grounded wall outlet. The LED indicator on the control box should illuminate, indicating power is supplied.
4. Paruoškite transporto priemonę: Ensure your electric vehicle is turned off and the charging port cover is open.

6. Naudojimo instrukcijos

6.1 Connecting and Starting Charge

1. Prisijunkite prie transporto priemonės: Insert the Type 2 connector firmly into your vehicle's charging port. You should hear a click as it locks into place.
2. Pasirinkite Dabartinis (nebūtina): Paspauskite dabartiniai nustatymai button (marked with 'A' or a current symbol) on the control box to cycle through available current options: 8A, 10A, 13A, 16A, 32A. Select the appropriate current based on your vehicle's requirements and the capacity of your power outlet. The LED indicator will show the selected current.
3. Pradėti įkrovimą: Once connected and current selected (if adjusted), the charger will initiate communication with the vehicle and begin charging. The LED indicator will change to show active charging status.

6.2 Scheduling Charge (Delay Start)

To set a delayed start time for charging:

1. After connecting the charger to both the power outlet and your vehicle, press the Tvarkaraščio nustatymai button (marked with a clock symbol) on the control box.
2. Each press will cycle through delay options (e.g., 2 hours, 4 hours, 6 hours, 8 hours, 10 hours). Select your desired delay.
3. The charger will wait for the set delay period before automatically starting the charging process.

6.3 Stopping and Disconnecting Charge

1. Stabdyti įkrovimą: Charging will automatically stop when your vehicle's battery is full or if a fault is detected. You can also manually stop charging by disconnecting the Type 2 connector from the vehicle (if your vehicle allows this without unlocking first).
2. Atjungti nuo transporto priemonės: Unlock your vehicle's charging port (if necessary) and carefully remove the Type 2 connector.
3. Atjunkite nuo maitinimo: Ištraukite maitinimo kištuką iš sieninio lizdo.
4. Išjungimo sistema: To completely power off the charger, press and hold the dabartiniai nustatymai button for 3 seconds. To restart, press and hold the same button for 3 seconds again.

7. Priežiūra

• Valymas: Disconnect the charger from all power sources before cleaning. Use a soft, dry cloth to wipe the control box and cables. Do not use abrasive cleaners, solvents, or immerse any part in water.
• Saugykla: When not in use, store the charger in its carrying bag in a dry, cool place, away from direct sunlight and extreme temperatures. Avoid coiling the cable too tightly.
• Patikra: Regularly inspect the cable and connectors for any signs of damage, fraying, or corrosion. If any damage is found, discontinue use and contact customer support.

8. Problemų sprendimas

9. Specifikacijos

10. Garantija ir palaikymas

For warranty information and technical support, please refer to the documentation included with your purchase or contact JATRHG customer service through the retailer where the product was purchased.

Please have your model number (EV-IEC-AC16-PV) and purchase date available when contacting support.