WAC Lighting R3HSDR-F9CS-WT

WAC Lighting Patriot 3in LED Square Recessed Light Instruction Manual

Model: R3HSDR-F9CS-WT

Įvadas

This manual provides comprehensive instructions for the safe installation, operation, and maintenance of your WAC Lighting Patriot 3in LED Square Recessed Light. Please read this manual thoroughly before installation and retain it for future reference.

Svarbi saugos informacija

Pakuotės turinys

Prieš pradėdami diegti, patikrinkite, ar yra visi komponentai:

WAC Lighting Patriot 3in LED Square Recessed Light with junction box

Figure 1: WAC Lighting Patriot 3in LED Square Recessed Light with attached driver and junction box.

Sąranka ir diegimas

The Patriot recessed light is designed for both remodel and new construction applications. An optional frame-in kit (R3H-FRAME) is sold separately for new construction when pre-framing is required.

Reikalingi įrankiai (neįtraukti):

Diegimo žingsniai:

  1. Išjungti maitinimą: Ensure power to the installation area is disconnected at the circuit breaker or fuse box.
  2. Prepare Ceiling Cutout: Create a 4.13-inch (approximately 10.5 cm) diameter cutout in the ceiling. The fixture is suitable for ceiling thicknesses between 0.5 inches and 1.5 inches.
  3. Prijunkite laidus:
    • Atidarykite jungties dėžutės dangtį.
    • Connect the building's supply wires to the fixture's wires using appropriate wire connectors (not included). Connect live to live, neutral to neutral, and ground to ground.
    • Secure all connections and close the junction box cover.
  4. Pasirinkite spalvos temperatūrą (CCT): Before inserting the junction box into the ceiling, locate the 5-CCT selectable switch inside the electrical box. Choose your desired color temperature (2700K, 3000K, 3500K, 4000K, or 5000K) by sliding the switch. This can also be adjusted after installation if the junction box remains accessible.5-CCT Selectable switch diagram showing color temperature options

    Figure 2: Location of the 5-CCT selectable switch within the electrical box.

  5. Įdėkite skirstomąją dėžutę: Carefully push the connected junction box through the ceiling cutout.
  6. Šviestuvo įrengimas:
    • Connect the light fixture cable to the junction box cable.
    • Gently push the light fixture into the ceiling cutout. The retention clips will secure the light engine into place.
    WAC Lighting Patriot 3in LED Square Recessed Light installed

    Figure 3: The WAC Lighting Patriot 3in LED Square Recessed Light.

  7. Atkurti maitinimą: Kai armatūra bus saugiai sumontuota, atkurkite elektros tiekimą grandinės pertraukikliu.

Beam Spread Lens Replacement:

The fixture comes with a 45-degree flood beam spread lens installed. An additional 25-degree narrow beam spread lens is included. To replace:

  1. Gently remove the existing lens from the fixture.
  2. Insert the desired lens into the fixture, ensuring it is seated correctly.

Naudojimo instrukcijos

Maitinimo įjungimas/išjungimas:

The light operates via a standard wall switch connected to the circuit. Flip the switch to turn the light on or off.

Spalvos temperatūros pasirinkimas (CCT):

The Patriot light features a 5-CCT selectable switch located inside the electrical junction box. This switch allows you to choose from five color temperatures:

To change the CCT, access the junction box and slide the switch to the desired setting. This adjustment can be made before, during, or after installation, provided the junction box is accessible.

Pritemdymas:

This fixture is designed for smooth and continuous dimming with compatible electronic low voltage (ELV) or TRIAC dimmers. When using an ELV dimmer, the light dims down to 10%. With TRIAC dimmers, it dims down to 5%. Ensure your dimmer is compatible with LED fixtures.

Priežiūra

The WAC Lighting Patriot LED Recessed Light requires minimal maintenance.

Trikčių šalinimas

ProblemaGalima priežastisSprendimas
Šviesa neįsijungia.
  • Armatūrai nėra energijos.
  • Atsipalaidavusi laidų jungtis.
  • Sugedęs jungiklis.
  • Patikrinkite grandinės pertraukiklį / saugiklį.
  • Patikrinkite, ar visi laidai yra tvirtai sujungti (pirmiausia išjunkite maitinimą).
  • Išbandykite jungiklį su kitu įrenginiu arba pakeiskite jį.
Šviesa mirksi arba netinkamai pritemsta.
  • Nesuderinamas pritemdymo jungiklis.
  • Atsilaisvinę laidai.
  • Ensure dimmer is compatible with LED fixtures (ELV or TRIAC).
  • Patikrinkite laidų jungtis (pirmiausia įsitikinkite, kad išjungėte maitinimą).
Neteisinga spalvų temperatūra.CCT jungiklis nustatytas neteisingai.Access the junction box and adjust the 5-CCT selectable switch to the desired setting.

Specifikacijos

Modelio pavadinimasPatriotas
Modelio numerisR3HSDR-F9CS-WT
Prekės ženklasWAC apšvietimas
Tvirtinimo tipas3in LED Square Recessed Downlight
Galia12W
Pristatome liumenus1,035lm (maks.)
CRI90
Įvertintos valandos50,000
Spalvos temperatūra5-CCT Selectable (2700K, 3000K, 3500K, 4000K, 5000K)
ttage120V-277V Universalus
PritemdymasSmooth and continuous with ELV (to 10%) or TRIAC (to 5%) dimmers
MedžiagaAliuminis iš dengto aliuminio
BaigtiDažyta balta
Gaminio matmenys4.75 colio ilgio x 4.75 colių pločio x 4.13 colio aukščio
Lubų išpjova4.13 colių
Lubų storis0.5–1.5 colio
Naudojimas viduje / laukeIndoor, Outdoor (Suitable for Dry, Damp, and Wet Locations)
SertifikataiETL & cETL UL #1598, Airtight, IC-Rated, CEC Title 24 Compliant, Energy Star 2.0 Certified, Title 24 JA8-2016
Prekės svoris1.7 svaro
UPC790576883571
Dimensional drawing of WAC Lighting Patriot 3in LED Square Recessed Light

Figure 4: Dimensional drawing with measurements for installation.

Informacija apie garantiją

This WAC Lighting Patriot LED Recessed Light is covered by a 5 metų gamintojo garantija. This warranty covers defects in materials and workmanship under normal use. For warranty claims or detailed terms and conditions, please refer to the official WAC Lighting websvetainėje arba susisiekite su klientų aptarnavimo tarnyba.

Pagalba klientams

For technical assistance, troubleshooting, or warranty inquiries, please contact WAC Lighting customer support. Refer to the official WAC Lighting websvetainė, kurioje pateikiama naujausia kontaktinė informacija.

WAC apšvietimas Websvetainė: www.waclighting.com

Susiję dokumentai - R3HSDR-F9CS-WT

Preview „WAC Lighting InvisiLED“ lauko RGBWW LED juostos šviestuvų montavimo vadovas (T24-OD1-XX-CC)
Šiame dokumente pateikiamos išsamios WAC Lighting InvisiLED lauko RGBWW LED juostinių šviestuvų sistemos, modelio T24-OD1-XX-CC, įrengimo instrukcijos. Jame aptariamos esminės saugos priemonės, laidų schemos, galios skaičiavimai, maksimalūs juostų ilgiai ir įvairūs montavimo bei prijungimo būdai, skirti naudoti lauke.
Preview WAC LOTOS R 6" modifikuoto LED įleidžiamojo šviestuvo montavimo vadovas (R6DRAK)
Išsamios „WAC Lighting LOTOS R 6" Retrofit LED“ įleidžiamojo šviestuvo (modelis R6DRAK) montavimo instrukcijos. Sužinokite, kaip saugiai sumontuoti šį įleidžiamąjį šviestuvą ir nustatyti jo spalvos temperatūrą.
Preview WAC RCUV-WT išmaniojo ventiliatoriaus nuotolinio valdymo pulto naudojimo instrukcijos
Išsamus WAC RCUV-WT išmaniojo ventiliatoriaus nuotolinio valdymo pulto naudojimo vadovas, apimantis susiejimą, ventiliatoriaus ir apšvietimo veikimą, vėjelio režimą, automatinį UV išjungimą, „Wi-Fi“ nustatymus ir trikčių šalinimą.
Preview WAC tinklo šliuzo WH-GW1-WT montavimo instrukcijos
WAC tinklo šliuzo WH-GW1-WT įrengimo instrukcijos, įskaitant maitinimo, konfigūravimo ir FCC atitikties informaciją.
Preview „WAC Lighting Volta 2“ reguliuojamo balto šviestuvo pertvarkomo korpuso nematomų apdailos elementų montavimo vadovas
Šiame dokumente pateikiamos išsamios „WAC Lighting Volta 2"“ reguliuojamo balto šviestuvo su nematoma apdaila (modelių numeriai R2RRL ir R2SRL) montavimo instrukcijos. Jame pateikiamos svarbiausios saugos priemonės, montavimo reikalavimai, matmenų duomenys, techninės specifikacijos ir išsamios nuoseklios instrukcijos, kaip tinkamai sumontuoti.
Preview WAC Lighting Tesla 3" LED New Construction Housing Installation Guide
Installation instructions for the WAC Lighting Tesla 3" LED New Construction Housing, including safety, overview, housing installation steps, and wiring diagrams. Compatible with HR-3LED-H18D1, HR-3LED-H22D, and HR-3LED-H15D models.