1. Įvadas
The EPOMAKER TH80 Pro is a high-performance 75% layout mechanical gaming keyboard designed for versatility and customization. It features a compact design, hot-swappable switches, tri-mode connectivity (Bluetooth 5.0, 2.4GHz wireless, and USB-C wired), PBT keycaps, and vibrant RGB backlighting. This manual provides instructions for setting up, operating, maintaining, and troubleshooting your TH80 Pro keyboard.
Image: The EPOMAKER TH80 Pro keyboard showcasing its 75% layout and key features like hot-swappable design, tri-mode connectivity, and RGB backlighting.
2. Pakuotės turinys
Prieš pradėdami, įsitikinkite, kad pakuotėje yra visi reikalingi daiktai:
- EPOMAKER TH80 Pro Mechanical Keyboard
- USB-C į USB-A laidas
- Klaviatūros traukiklis
- Jungiklio traukiklis
- Papildomi jungikliai (kiekis gali skirtis)
- 2.4GHz USB Receiver (stored in the keyboard)
- Vartotojo vadovas (šis dokumentas)
Image: Contents of the EPOMAKER TH80 Pro package, including the keyboard, USB cable, keycap puller, and user manual.
3. Sąranka ir ryšys
3.1 Įjungimas ir įkrovimas
Locate the power switch on the underside of the keyboard. Slide it to the 'ON' position to power on the device. To charge the keyboard, connect the provided USB-C cable to the keyboard's USB-C port and the other end to a USB power source. The keyboard features a 4000mAh battery for extended use.
Image: Underside of the EPOMAKER TH80 Pro keyboard, showing the power switch and the storage slot for the 2.4GHz USB receiver.
3.2 Ryšio režimai
The TH80 Pro supports three connectivity modes:
- USB-C laidinis režimas: Connect the keyboard directly to your device using the USB-C cable. This mode also charges the keyboard.
- 2.4 GHz belaidis režimas: Insert the 2.4GHz USB receiver into an available USB port on your computer. The keyboard will automatically connect. The polling rate can reach up to 1000Hz in this mode.
- „Bluetooth 5.0“ režimas: Klaviatūra gali prisijungti prie iki trijų „Bluetooth“ įrenginių.
Image: Diagram illustrating the tri-mode connectivity options of the EPOMAKER TH80 Pro, including USB-C wired, Bluetooth, and 2.4GHz wireless, connecting to various devices like PC, laptop, tablet, and smartphone.
„Bluetooth“ poravimo instrukcijos:
- Įsitikinkite, kad klaviatūra įjungta.
- Paspauskite fn+1, fn+2, arba fn+3 to select a Bluetooth channel. The corresponding key will flash rapidly, indicating pairing mode.
- On your device, search for Bluetooth devices and select "TH80 Pro" to connect.
- Once connected, the key will stop flashing and remain steadily lit.
4. Klaviatūros valdymas
4.1 Pagrindinės klavišų funkcijos
The TH80 Pro features a 75% layout, providing essential keys while maintaining a compact form factor. Standard alphanumeric keys, function row (F1-F12), navigation keys (Page Up, Page Down, Home, End via Fn combinations), and arrow keys are present.
4.2 RGB foninio apšvietimo valdymas
The keyboard features customizable RGB backlighting. Use the following shortcuts to control the lighting effects:
- Fn + Grįžimo klavišas: Turn on/off backlighting.
- Fn + |\: Toggle through different RGB lighting effects.
- Fn + P: Toggle through different RGB lighting colors.
Image: The EPOMAKER TH80 Pro keyboard displaying its vibrant RGB backlighting, with an overlay showing key combinations for controlling backlight functions.
4.3 Rankenėlės valdymas
The rotary knob located on the top right of the keyboard serves multiple functions:
- Pasukti: Reguliuoja sistemos garsumą.
- Paspauskite: Nutildo / įjungia garsą.
4.4 Programuojama programinė įranga
The TH80 Pro is compatible with dedicated software for advanced customization. This software allows you to:
- Redaguoti makrokomandas.
- Tinkinkite RGB apšvietimo efektus.
- Pertvarkyti klavišus.
- Redefine knob functions.
The software is compatible with Windows and Mac OS. Please visit the official EPOMAKER websvetainę, kurioje galite atsisiųsti naujausią versiją.
Image: Screenshot of the EPOMAKER TH80 Pro's programmable software interface, showing options for macro editing, RGB effects, key remapping, and knob redefinition.
4.5 Karštuoju būdu keičiami jungikliai
The TH80 Pro features a hot-swappable PCB, allowing you to change mechanical switches without soldering. It supports most 3-pin or 5-pin mechanical switches. Use the included switch puller to carefully remove switches and insert new ones.
Vaizdas: Stambus planas view of the EPOMAKER TH80 Pro keyboard demonstrating the hot-swappable switch feature, showing a switch being removed with a switch puller and the underlying hot-swap socket.
5. Priežiūra
5.1 Klaviatūros valymas
Norėdami išlaikyti optimalų našumą ir išvaizdą, reguliariai valykite klaviatūrą:
- Atjunkite klaviatūrą nuo visų maitinimo šaltinių.
- Naudokite minkštą, nepūkuotą audinį dampnuvalykite klaviatūros dangtelius ir korpusą nedideliu kiekiu vandens arba švelniu valymo tirpalu.
- For deeper cleaning, use the included keycap puller to remove keycaps and clean underneath with compressed air or a small brush.
- Prieš prijungdami klaviatūrą, įsitikinkite, kad ji yra visiškai sausa.
5.2 Klaviatūros dangtelio ir jungiklio keitimas
The PBT keycaps are durable and oil-resistant. If you wish to replace them or the switches:
- Use the keycap puller to gently remove keycaps by hooking it onto the sides of the keycap and pulling upwards.
- Use the switch puller to remove switches by compressing the clips on the top and bottom of the switch and pulling upwards.
- Align new switches carefully with the PCB sockets and press down firmly until they click into place.
- Place new keycaps onto the switch stems and press down until secure.
6. Problemų sprendimas
If you encounter issues with your EPOMAKER TH80 Pro, refer to the following common solutions:
| Problema | Galima priežastis | Sprendimas |
|---|---|---|
| Klaviatūra nereaguoja (laidinė) | Loose cable connection, faulty USB port, keyboard off. | Ensure USB-C cable is securely connected. Try a different USB port or cable. Check if the power switch is ON. |
| Klaviatūra nereaguoja (2.4 GHz belaidis ryšys) | Receiver not connected, low battery, keyboard off, interference. | Ensure 2.4GHz receiver is plugged in. Charge the keyboard. Check if the power switch is ON. Move closer to the receiver or reduce interference. |
| Klaviatūra nereaguoja („Bluetooth“) | Not paired, low battery, out of range, incorrect channel selected. | Re-pair the keyboard (Fn+1/2/3). Charge the keyboard. Ensure device Bluetooth is on. Select the correct Bluetooth channel. |
| RGB backlighting not working | Foninis apšvietimas išjungtas, programinės įrangos problema. | Press Fn + Backspace to toggle backlight. Check software settings. |
| Keys double-typing or not registering | Sugedęs jungiklis, šiukšlės po klaviatūros dangteliu. | Remove keycap and clean. Replace the faulty switch using the switch puller. |
7. Specifikacijos
Key technical specifications for the EPOMAKER TH80 Pro keyboard:
| Funkcija | Detalė |
|---|---|
| Modelis | TH80 Pro |
| Išdėstymas | 75 % kompaktiškas |
| Ryšys | „Bluetooth 5.0“, 2.4 GHz belaidis ryšys, USB-C laidinis ryšys |
| Baterijos talpa | 4000 mAh |
| Klaviatūros | PBT, MDA Profile, Dye-sub Technique |
| Jungikliai | Hot-swappable (3/5-pin compatible) |
| Foninis apšvietimas | RGB |
| Suderinama OS | Windows, Mac OS, PS5, PS4, Xbox, Android, iOS |
| Gaminio matmenys | 12.91" ilgio x 5.59" pločio x 1.57" aukščio (32.8 cm x 14.2 cm x 4 cm) |
| Prekės svoris | 2.99 svaro (1.36 kg) |
8. Garantija ir palaikymas
EPOMAKER products are covered by a limited warranty against manufacturing defects. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official EPOMAKER website. If you require technical assistance or have questions not covered in this manual, please contact EPOMAKER customer support through their official websvetainėje arba mažmenininke, iš kurio įsigijote produktą.
