Įvadas
The mophie powerstation Go is a versatile portable device designed to provide power in various emergency situations. It functions as a car jump starter, a portable power bank for mobile devices, and a bright LED work light. This manual provides essential instructions for safe and effective use, maintenance, and troubleshooting of your powerstation Go.
Saugos informacija
Prieš naudodami šį gaminį, perskaitykite visus saugos įspėjimus ir instrukcijas. Nesilaikant šių instrukcijų, gali kilti elektros smūgis, gaisras arba sunkūs sužalojimai.
- Do not expose the powerstation Go to moisture or extreme temperatures.
- Nebandykite ardyti ar modifikuoti įrenginio.
- Laikyti vaikams nepasiekiamoje vietoje.
- Ensure proper polarity when connecting jumper cables to a vehicle battery. Incorrect connection can cause damage or injury.
- Use only the provided jumper cables and charging accessories.
- Venkite ilgalaikio tiesioginių saulės spindulių poveikio.
- If the device becomes excessively hot, discontinue use immediately.
Pakuotės turinys
- mophie powerstation Go
- Mini Jumper Cables
- Įkrovimo kabelis (USB-C į USB-A)
- Vartotojo vadovas
Produktas baigtasview
Familiarize yourself with the components of your mophie powerstation Go.
- LED žibintuvėlis: Located at one end, provides bright illumination.
- Darbo šviesa: Integrated into the body, offers broad area lighting.
- Maitinimo mygtukas: Activates the device and checks battery status.
- LED baterijos indikatorius: Displays the remaining charge level.
- USB-A išvesties prievadas: Mobiliesiems įrenginiams įkrauti.
- Užvedimo kabelio prievadas: Dedicated port for connecting the mini jumper cables.
- USB-C įvesties prievadas: For recharging the powerstation Go.
Sąranka: Pradinis įkrovimas
Before first use, fully charge your mophie powerstation Go.
- Connect the provided USB-C charging cable to the USB-C input port on the powerstation Go.
- Connect the other end of the charging cable to a compatible USB wall adapter (not included) or a powered USB port.
- The LED battery indicator lights will illuminate and flash, indicating the charging status. All four lights will be solid when fully charged.
- Įkrovimo laikas gali skirtis priklausomai nuo maitinimo šaltinio.
Naudojimo instrukcijos
1. Peršokti užvedant transporto priemonę
Ensure the powerstation Go is at least 50% charged before attempting to jump start a vehicle.
- Connect the mini jumper cables to the jumper cable port on the powerstation Go. Ensure a secure connection.
- Prijunkite raudona clamp to the positive (+) terminal of the vehicle's dead battery.
- Prijunkite juodas clamp to a metal part of the vehicle's chassis (unpainted, non-moving part) or the negative (-) terminal of the battery, if accessible and safe.
- Once connected, the powerstation Go will automatically perform safety checks. Wait for the indicator light on the jumper cable connector to turn solid green.
- Start your vehicle. If it doesn't start immediately, wait 30 seconds and try again. Do not attempt more than three consecutive jump starts.
- Kai tik automobilis užsives, nedelsdami atjunkite juodą laidąamp, tada raudonas clamp, and finally disconnect the jumper cables from the powerstation Go.
2. Mobiliųjų įrenginių įkrovimas
Use the USB-A output port to charge your smartphone, tablet, or other USB-powered devices.
- Connect your device's USB charging cable to the USB-A output port on the powerstation Go.
- The powerstation Go will automatically begin charging your device. The LED battery indicator lights will show the remaining charge.
- Atjunkite įrenginį, kai įkrovimas bus baigtas.
3. Using the LED Flashlight and Work Light
The powerstation Go features both a focused LED flashlight and a broad work light.
- To activate the LED Flashlight: Press and hold the power button for 2 seconds. Press again to cycle through modes (high, low, strobe, off).
- To activate the Work Light: Double-press the power button. Double-press again to cycle through modes (white, red, flashing red, off).
Priežiūra
- Valymas: Nuvalykite įrenginį minkštu, sausu skudurėliu. Nenaudokite stiprių cheminių medžiagų ar abrazyvinių medžiagų.
- Saugykla: Store the powerstation Go in a cool, dry place away from direct sunlight. For optimal battery life, recharge the device every 3 months if not in regular use.
- Akumuliatoriaus priežiūra: The internal battery is not user-replaceable. Do not attempt to open the device.
Trikčių šalinimas
| Problema | Galima priežastis | Sprendimas |
|---|---|---|
| Įrenginys neįkraunamas | Charging cable or adapter faulty; port obstruction. | Try a different USB-C cable and wall adapter. Ensure ports are clean and free of debris. |
| Vehicle not jump starting | Low powerstation Go charge; incorrect cable connection; severely dead battery. | Ensure powerstation Go is fully charged. Verify correct clamp polarity. Check vehicle battery for severe damage. Consult vehicle manual. |
| Mobile device not charging | Powerstation Go battery low; faulty USB cable; device incompatibility. | Recharge powerstation Go. Try a different USB cable. Ensure your device is compatible with standard USB charging. |
| Šviesos neveikia | Powerstation Go battery low; incorrect button press. | Recharge powerstation Go. Refer to "Using the LED Flashlight and Work Light" section for correct operation. |
Specifikacijos
- Prekinis ženklas: mophie
- Modelio numeris: mpsgrgd-FL36630
- Gamintojo dalies numeris: 401107454
- Baterijos talpa: 9900 mAh (36.6 Wh)
- ttage: 12 Volts (for jump starting)
- Produkto svoris: 1.07 kilogramo
- Matmenys: 30.3 x 24.69 x 10.79 cm (pakuotė)
- Ypatingos savybės: LED Indicator Lights, 450-lumen LED Flashlight, Spark-proof Jumper Cables
- Automotive Service Type: Sunkvežimis, automobilis
Garantija ir palaikymas
For warranty information and customer support, please visit the official mophie websvetainėje arba susisiekite su jų klientų aptarnavimo skyriumi. Išsaugokite pirkimo įrodymą garantiniams reikalavimams.
Palaikymas internetu: www.mophie.com/support
